OpenELEC Forum
Remote receiver does not work on boot - Printable Version

+- OpenELEC Forum (https://forum.openelec.tv)
+-- Forum: Off Topic (https://forum.openelec.tv/forumdisplay.php?fid=66)
+--- Forum: MISCELLANEOUS (https://forum.openelec.tv/forumdisplay.php?fid=67)
+--- Thread: Remote receiver does not work on boot (/showthread.php?tid=10427)

Pages: 1 2


Remote receiver does not work on boot - reynard80 - 08-24-2011

I'm running openelec for a while now on a fusion build. Almost everything is working now, very happy with it. There's one thing however, that I haven't been able to fix: my remote receiver is not working when I boot the system. I have to disconnect and then reconnect the USB IR receiver to get it working. After I have done that, it's working perfectly. Anyone with a solution?

Thanks a lot!

Note: hopefully you'll forgive me for double posting this in the hardware support forum, but no one was able to help me there.


Re: Remote receiver does not work on boot - therio - 08-24-2011

Hi Reynard, could you post the dmesg log when you have booted with the remote receiver attached, but not already reconnected?
After that, please make a dmesg log when you reconnected the remote receiver. Have to see what is going on.');


Re: Remote receiver does not work on boot - reynard80 - 08-24-2011

Thanks for the quick reply. Here are my logs.

Fresh boot:
Code:
root /var/log # dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.0.3 (sraue@fedora.scdemo.local) (gcc version 4.5.3 (GCC) ) #1 SMP PREEMPT Fri Aug 19 22:03:50 BST 2011
[ 0.000000] KERNEL supported cpus:
[ 0.000000] AMD AuthenticAMD
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009d800 (usable)
[ 0.000000] BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 0000000066a1a000 (usable)
[ 0.000000] BIOS-e820: 0000000066a1a000 - 0000000066a6e000 (ACPI NVS)
[ 0.000000] BIOS-e820: 0000000066a6e000 - 0000000066cb5000 (reserved)
[ 0.000000] BIOS-e820: 0000000066cb5000 - 0000000066cc6000 (ACPI NVS)
[ 0.000000] BIOS-e820: 0000000066cc6000 - 0000000066cdc000 (reserved)
[ 0.000000] BIOS-e820: 0000000066cdc000 - 0000000066cde000 (ACPI NVS)
[ 0.000000] BIOS-e820: 0000000066cde000 - 0000000066cdf000 (reserved)
[ 0.000000] BIOS-e820: 0000000066cdf000 - 0000000066ce5000 (ACPI NVS)
[ 0.000000] BIOS-e820: 0000000066ce5000 - 0000000066d49000 (reserved)
[ 0.000000] BIOS-e820: 0000000066d49000 - 0000000066d8c000 (ACPI NVS)
[ 0.000000] BIOS-e820: 0000000066d8c000 - 0000000066f00000 (usable)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec10000 - 00000000fec11000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed61000 - 00000000fed71000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed80000 - 00000000fed90000 (reserved)
[ 0.000000] BIOS-e820: 00000000fef00000 - 0000000100000000 (reserved)
[ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[ 0.000000] DMI 2.6 present.
[ 0.000000] DMI: System manufacturer System Product Name/E35M1-I DELUXE, BIOS 1202 04/13/2011
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x66f00 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF write-through
[ 0.000000] C0000-CEFFF write-protect
[ 0.000000] CF000-E7FFF uncachable
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 066F00000 mask FFFF00000 uncachable
[ 0.000000] 2 base 067000000 mask FFF000000 uncachable
[ 0.000000] 3 base 068000000 mask FF8000000 uncachable
[ 0.000000] 4 base 070000000 mask FF0000000 uncachable
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [c00fcd90] fcd90
[ 0.000000] initial memory mapped : 0 - 01c00000
[ 0.000000] Base memory trampoline at [c0099000] 99000 size 16384
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 1bfb000-1c00000
[ 0.000000] ACPI: RSDP 000f0430 00024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 66a63068 00054 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 66a694d0 000F4 (v04 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20110413/tbfadt-560)
[ 0.000000] ACPI: DSDT 66a63150 0637C (v02 ALASKA A M I 00000000 INTL 20051117)
[ 0.000000] ACPI: FACS 66cdff80 00040
[ 0.000000] ACPI: APIC 66a695c8 00062 (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: MCFG 66a69630 0003C (v01 ALASKA A M I 01072009 MSFT 00010013)
[ 0.000000] ACPI: HPET 66a69670 00038 (v01 ALASKA A M I 01072009 AMI 00000004)
[ 0.000000] ACPI: SSDT 66a696a8 003DE (v01 AMD POWERNOW 00000001 AMD 00000001)
[ 0.000000] ACPI: SSDT 66a69a88 012FA (v02 AMD ALIB 00000001 MSFT 04000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 759MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x00066f00
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009d
[ 0.000000] 0: 0x00000100 -> 0x00066a1a
[ 0.000000] 0: 0x00066d8c -> 0x00066f00
[ 0.000000] On node 0 totalpages: 420635
[ 0.000000] free_area_init_node: node 0, pgdat c1482b00, node_mem_map f6b1d200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3949 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 1519 pages used for memmap
[ 0.000000] HighMem zone: 191905 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 0, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] Allocating PCI resources starting at 66f00000 (gap: 66f00000:97d00000)
[ 0.000000] setup_percpu: NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 11 pages/cpu @f6400000 s21888 r0 d23168 u2097152
[ 0.000000] pcpu-alloc: s21888 r0 d23168 u2097152 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 417340
[ 0.000000] Kernel command line: fastboot root=/dev/ram0 rdinit=/init threadirqs boot=LABEL=System disk=LABEL=Storage quiet BOOT_IMAGE=/KERNEL
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (000377fe:00066f00)
[ 0.000000] Memory: 1659416k/1686528k available (3552k kernel code, 23124k reserved, 1084k data, 4096k init, 773696k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff67000 - 0xfffff000 ( 608 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc1488000 - 0xc1888000 (4096 kB)
[ 0.000000] .data : 0xc1378008 - 0xc14873c0 (1084 kB)
[ 0.000000] .text : 0xc1000000 - 0xc1378008 (3552 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] NR_IRQS:384
[ 0.000000] CPU 0 irqstacks, hard=f600c000 soft=f600e000
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1599.820 MHz processor.
[ 0.003338] Calibrating delay loop (skipped), value calculated using timer frequency.. 3200.95 BogoMIPS (lpj=5332733)
[ 0.003346] pid_max: default: 32768 minimum: 301
[ 0.006712] Mount-cache hash table entries: 512
[ 0.007022] Initializing cgroup subsys cpuacct
[ 0.007046] Initializing cgroup subsys freezer
[ 0.007075] CPU: Physical Processor ID: 0
[ 0.007078] CPU: Processor Core ID: 0
[ 0.007220] ACPI: Core revision 20110413
[ 0.013415] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.013722] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.049056] CPU0: AMD E-350 Processor stepping 00
[ 0.049997] Performance Events: AMD PMU driver.
[ 0.049997] ... version: 0
[ 0.049997] ... bit width: 48
[ 0.049997] ... generic registers: 4
[ 0.049997] ... value mask: 0000ffffffffffff
[ 0.049997] ... max period: 00007fffffffffff
[ 0.049997] ... fixed-purpose events: 0
[ 0.049997] ... event mask: 000000000000000f
[ 0.086757] CPU 1 irqstacks, hard=f60c8000 soft=f60ca000
[ 0.086769] Booting Node 0, Processors #1 Ok.
[ 0.086776] smpboot cpu 1: start_ip = 99000
[ 0.006666] Initializing CPU#1
[ 0.183344] Brought up 2 CPUs
[ 0.183349] Total of 2 processors activated (6402.08 BogoMIPS).
[ 0.184168] devtmpfs: initialized
[ 0.184570] NET: Registered protocol family 16
[ 0.184778] Extended Config Space enabled on 0 nodes
[ 0.184790] ACPI: bus type pci registered
[ 0.184860] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.184867] PCI: not using MMCONFIG
[ 0.201838] PCI: Using configuration type 1 for base access
[ 0.201841] PCI: Using configuration type 1 for extended access
[ 0.201875] mtrr: your CPUs had inconsistent fixed MTRR settings
[ 0.201879] mtrr: probably your BIOS does not setup all CPUs.
[ 0.201882] mtrr: corrected configuration.
[ 0.204407] bio: create slab <bio-0> at 0
[ 0.206406] ACPI: EC: Look up EC in DSDT
[ 0.208318] ACPI: Executed 3 blocks of module-level executable AML code
[ 0.211921] ACPI Error: [RAMB] Namespace lookup failure, AE_NOT_FOUND (20110413/psargs-359)
[ 0.211935] ACPI Exception: AE_NOT_FOUND, Could not execute arguments for [RAMW] (Region) (20110413/nsinit-349)
[ 0.224045] ACPI: Interpreter enabled
[ 0.224055] ACPI: (supports S0 S3 S5)
[ 0.224085] ACPI: Using IOAPIC for interrupt routing
[ 0.224332] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.224409] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.224414] PCI: Using MMCONFIG for extended config space
[ 0.232921] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.233142] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.233583] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
[ 0.233589] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
[ 0.233594] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.233599] pci_root PNP0A03:00: host bridge window [mem 0x000c8000-0x000dffff]
[ 0.233604] pci_root PNP0A03:00: host bridge window [mem 0x7f000000-0xffffffff]
[ 0.233618] pci_root PNP0A03:00: address space collision: host bridge window [mem 0x000c8000-0x000dffff] conflicts with Video ROM [mem 0x000c0000-0x000ce1ff]
[ 0.233637] pci 0000:00:00.0: [1022:1510] type 0 class 0x000600
[ 0.233694] pci 0000:00:01.0: [1002:9802] type 0 class 0x000300
[ 0.233710] pci 0000:00:01.0: reg 10: [mem 0xc0000000-0xcfffffff pref]
[ 0.233721] pci 0000:00:01.0: reg 14: [io 0xf000-0xf0ff]
[ 0.233732] pci 0000:00:01.0: reg 18: [mem 0xfeb00000-0xfeb3ffff]
[ 0.233755] pci 0000:00:01.0: reg 24: [mem 0xfe700000-0xfe7fffff]
[ 0.233784] pci 0000:00:01.0: supports D1 D2
[ 0.233807] pci 0000:00:01.1: [1002:1314] type 0 class 0x000403
[ 0.233821] pci 0000:00:01.1: reg 10: [mem 0xfeb40000-0xfeb43fff]
[ 0.233881] pci 0000:00:01.1: supports D1 D2
[ 0.233912] pci 0000:00:04.0: [1022:1512] type 1 class 0x000604
[ 0.233972] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[ 0.233979] pci 0000:00:04.0: PME# disabled
[ 0.234028] pci 0000:00:11.0: [1002:4391] type 0 class 0x000106
[ 0.234055] pci 0000:00:11.0: reg 10: [io 0xf140-0xf147]
[ 0.234069] pci 0000:00:11.0: reg 14: [io 0xf130-0xf133]
[ 0.234084] pci 0000:00:11.0: reg 18: [io 0xf120-0xf127]
[ 0.234098] pci 0000:00:11.0: reg 1c: [io 0xf110-0xf113]
[ 0.234113] pci 0000:00:11.0: reg 20: [io 0xf100-0xf10f]
[ 0.234127] pci 0000:00:11.0: reg 24: [mem 0xfeb4b000-0xfeb4b3ff]
[ 0.234190] pci 0000:00:12.0: [1002:4397] type 0 class 0x000c03
[ 0.234210] pci 0000:00:12.0: reg 10: [mem 0xfeb4a000-0xfeb4afff]
[ 0.234304] pci 0000:00:12.2: [1002:4396] type 0 class 0x000c03
[ 0.234330] pci 0000:00:12.2: reg 10: [mem 0xfeb49000-0xfeb490ff]
[ 0.234423] pci 0000:00:12.2: supports D1 D2
[ 0.234427] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.234434] pci 0000:00:12.2: PME# disabled
[ 0.234463] pci 0000:00:13.0: [1002:4397] type 0 class 0x000c03
[ 0.234482] pci 0000:00:13.0: reg 10: [mem 0xfeb48000-0xfeb48fff]
[ 0.234576] pci 0000:00:13.2: [1002:4396] type 0 class 0x000c03
[ 0.234603] pci 0000:00:13.2: reg 10: [mem 0xfeb47000-0xfeb470ff]
[ 0.234696] pci 0000:00:13.2: supports D1 D2
[ 0.234700] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.234706] pci 0000:00:13.2: PME# disabled
[ 0.234735] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05
[ 0.234836] pci 0000:00:14.3: [1002:439d] type 0 class 0x000601
[ 0.234939] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604
[ 0.234995] pci 0000:00:14.5: [1002:4399] type 0 class 0x000c03
[ 0.235014] pci 0000:00:14.5: reg 10: [mem 0xfeb46000-0xfeb46fff]
[ 0.235108] pci 0000:00:15.0: [1002:43a0] type 1 class 0x000604
[ 0.235188] pci 0000:00:15.0: supports D1 D2
[ 0.235222] pci 0000:00:15.1: [1002:43a1] type 1 class 0x000604
[ 0.235301] pci 0000:00:15.1: supports D1 D2
[ 0.235335] pci 0000:00:15.2: [1002:43a2] type 1 class 0x000604
[ 0.235414] pci 0000:00:15.2: supports D1 D2
[ 0.235448] pci 0000:00:15.3: [1002:43a3] type 1 class 0x000604
[ 0.235527] pci 0000:00:15.3: supports D1 D2
[ 0.235562] pci 0000:00:16.0: [1002:4397] type 0 class 0x000c03
[ 0.235581] pci 0000:00:16.0: reg 10: [mem 0xfeb45000-0xfeb45fff]
[ 0.235675] pci 0000:00:16.2: [1002:4396] type 0 class 0x000c03
[ 0.235702] pci 0000:00:16.2: reg 10: [mem 0xfeb44000-0xfeb440ff]
[ 0.235794] pci 0000:00:16.2: supports D1 D2
[ 0.235798] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
[ 0.235805] pci 0000:00:16.2: PME# disabled
[ 0.235834] pci 0000:00:18.0: [1022:1700] type 0 class 0x000600
[ 0.235880] pci 0000:00:18.1: [1022:1701] type 0 class 0x000600
[ 0.235922] pci 0000:00:18.2: [1022:1702] type 0 class 0x000600
[ 0.235967] pci 0000:00:18.3: [1022:1703] type 0 class 0x000600
[ 0.236019] pci 0000:00:18.4: [1022:1704] type 0 class 0x000600
[ 0.236062] pci 0000:00:18.5: [1022:1718] type 0 class 0x000600
[ 0.236104] pci 0000:00:18.6: [1022:1716] type 0 class 0x000600
[ 0.236147] pci 0000:00:18.7: [1022:1719] type 0 class 0x000600
[ 0.236243] pci 0000:00:04.0: PCI bridge to [bus 01-01]
[ 0.236252] pci 0000:00:04.0: bridge window [io 0xfff000-0x0000] (disabled)
[ 0.236259] pci 0000:00:04.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.236269] pci 0000:00:04.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.236347] pci 0000:00:14.4: PCI bridge to [bus 02-02] (subtractive decode)
[ 0.236354] pci 0000:00:14.4: bridge window [io 0xf000-0x0000] (disabled)
[ 0.236361] pci 0000:00:14.4: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.236369] pci 0000:00:14.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.236374] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.236379] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.236384] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.236389] pci 0000:00:14.4: bridge window [mem 0x7f000000-0xffffffff] (subtractive decode)
[ 0.236483] pci 0000:03:00.0: [168c:002b] type 0 class 0x000280
[ 0.236517] pci 0000:03:00.0: reg 10: [mem 0xfea00000-0xfea0ffff 64bit]
[ 0.236631] pci 0000:03:00.0: supports D1
[ 0.236634] pci 0000:03:00.0: PME# supported from D0 D1 D3hot D3cold
[ 0.236642] pci 0000:03:00.0: PME# disabled
[ 0.243403] pci 0000:00:15.0: PCI bridge to [bus 03-03]
[ 0.243425] pci 0000:00:15.0: bridge window [io 0xfff000-0x0000] (disabled)
[ 0.243440] pci 0000:00:15.0: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.243454] pci 0000:00:15.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.243557] pci 0000:04:00.0: [10ec:8168] type 0 class 0x000200
[ 0.243585] pci 0000:04:00.0: reg 10: [io 0xe000-0xe0ff]
[ 0.243626] pci 0000:04:00.0: reg 18: [mem 0xd0004000-0xd0004fff 64bit pref]
[ 0.243653] pci 0000:04:00.0: reg 20: [mem 0xd0000000-0xd0003fff 64bit pref]
[ 0.243726] pci 0000:04:00.0: supports D1 D2
[ 0.243730] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.243738] pci 0000:04:00.0: PME# disabled
[ 0.250071] pci 0000:00:15.1: PCI bridge to [bus 04-04]
[ 0.250094] pci 0000:00:15.1: bridge window [io 0xe000-0xefff]
[ 0.250108] pci 0000:00:15.1: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.250121] pci 0000:00:15.1: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
[ 0.250228] pci 0000:05:00.0: [1033:0194] type 0 class 0x000c03
[ 0.250263] pci 0000:05:00.0: reg 10: [mem 0xfe900000-0xfe901fff 64bit]
[ 0.250388] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
[ 0.250396] pci 0000:05:00.0: PME# disabled
[ 0.256736] pci 0000:00:15.2: PCI bridge to [bus 05-05]
[ 0.256758] pci 0000:00:15.2: bridge window [io 0xfff000-0x0000] (disabled)
[ 0.256773] pci 0000:00:15.2: bridge window [mem 0xfe900000-0xfe9fffff]
[ 0.256786] pci 0000:00:15.2: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.256893] pci 0000:06:00.0: [1033:0194] type 0 class 0x000c03
[ 0.256928] pci 0000:06:00.0: reg 10: [mem 0xfe800000-0xfe801fff 64bit]
[ 0.257052] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
[ 0.257061] pci 0000:06:00.0: PME# disabled
[ 0.263404] pci 0000:00:15.3: PCI bridge to [bus 06-06]
[ 0.263426] pci 0000:00:15.3: bridge window [io 0xfff000-0x0000] (disabled)
[ 0.263441] pci 0000:00:15.3: bridge window [mem 0xfe800000-0xfe8fffff]
[ 0.263454] pci 0000:00:15.3: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.263496] pci_bus 0000:00: on NUMA node 0
[ 0.263509] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.263806] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE20._PRT]
[ 0.263864] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE21._PRT]
[ 0.263927] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE22._PRT]
[ 0.263982] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE23._PRT]
[ 0.264056] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR14._PRT]
[ 0.264117] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.264123] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[ 0.264127] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.273279] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 10 11 14 15) *0
[ 0.273411] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 11 14 15) *0
[ 0.273527] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 11 14 15) *0
[ 0.273639] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 10 11 14 15) *0
[ 0.273731] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 14 15) *0
[ 0.273803] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 14 15) *0
[ 0.273875] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 10 11 14 15) *0
[ 0.273946] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 14 15) *0
[ 0.274069] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.274090] vgaarb: loaded
[ 0.274093] vgaarb: bridge control possible 0000:00:01.0
[ 0.274241] SCSI subsystem initialized
[ 0.274427] libata version 3.00 loaded.
[ 0.274475] usbcore: registered new interface driver usbfs
[ 0.274495] usbcore: registered new interface driver hub
[ 0.274851] usbcore: registered new device driver usb
[ 0.274964] Advanced Linux Sound Architecture Driver Version 1.0.24.
[ 0.274969] PCI: Using ACPI for IRQ routing
[ 0.285816] PCI: pci_cache_line_size set to 64 bytes
[ 0.285960] reserve RAM buffer: 000000000009d800 - 000000000009ffff
[ 0.285965] reserve RAM buffer: 0000000066a1a000 - 0000000067ffffff
[ 0.285972] reserve RAM buffer: 0000000066f00000 - 0000000067ffffff
[ 0.286216] cfg80211: Calling CRDA to update world regulatory domain
[ 0.286890] Switching to clocksource hpet
[ 0.287053] pnp: PnP ACPI init
[ 0.287068] ACPI: bus type pnp registered
[ 0.287368] pnp 00:00: [bus 00-ff]
[ 0.287374] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.287379] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.287383] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.287388] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.287392] pnp 00:00: [mem 0x000c8000-0x000dffff window]
[ 0.287396] pnp 00:00: [mem 0x7f000000-0xffffffff window]
[ 0.287400] pnp 00:00: [mem 0x00000000 window]
[ 0.287492] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.287555] pnp 00:01: [mem 0xe0000000-0xefffffff]
[ 0.287625] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.287632] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.288385] pnp 00:02: [io 0x040b]
[ 0.288390] pnp 00:02: [io 0x04d6]
[ 0.288393] pnp 00:02: [io 0x0c00-0x0c01]
[ 0.288397] pnp 00:02: [io 0x0c14]
[ 0.288400] pnp 00:02: [io 0x0c50-0x0c51]
[ 0.288404] pnp 00:02: [io 0x0c52]
[ 0.288407] pnp 00:02: [io 0x0c6c]
[ 0.288410] pnp 00:02: [io 0x0c6f]
[ 0.288413] pnp 00:02: [io 0x0cd0-0x0cd1]
[ 0.288417] pnp 00:02: [io 0x0cd2-0x0cd3]
[ 0.288420] pnp 00:02: [io 0x0cd4-0x0cd5]
[ 0.288424] pnp 00:02: [io 0x0cd6-0x0cd7]
[ 0.288427] pnp 00:02: [io 0x0cd8-0x0cdf]
[ 0.288431] pnp 00:02: [io 0x0800-0x089f]
[ 0.288435] pnp 00:02: [io 0x0000-0xffffffff disabled]
[ 0.288438] pnp 00:02: [io 0x0000-0x000f]
[ 0.288442] pnp 00:02: [io 0x0b20-0x0b3f]
[ 0.288445] pnp 00:02: [io 0x0900-0x090f]
[ 0.288449] pnp 00:02: [io 0x0910-0x091f]
[ 0.288452] pnp 00:02: [io 0xfe00-0xfefe]
[ 0.288456] pnp 00:02: [io 0x0060-0x005f disabled]
[ 0.288460] pnp 00:02: [io 0x0064-0x0063 disabled]
[ 0.288463] pnp 00:02: [mem 0xfec00000-0xfec00fff]
[ 0.288467] pnp 00:02: [mem 0xfee00000-0xfee00fff]
[ 0.288471] pnp 00:02: [mem 0xfed80000-0xfed8ffff]
[ 0.288475] pnp 00:02: [mem 0xfed61000-0xfed70fff]
[ 0.288478] pnp 00:02: [mem 0xfec10000-0xfec10fff]
[ 0.288482] pnp 00:02: [mem 0xfed00000-0xfed00fff]
[ 0.288486] pnp 00:02: [mem 0xffc00000-0xffffffff]
[ 0.288589] system 00:02: [io 0x040b] has been reserved
[ 0.288594] system 00:02: [io 0x04d6] has been reserved
[ 0.288599] system 00:02: [io 0x0c00-0x0c01] has been reserved
[ 0.288603] system 00:02: [io 0x0c14] has been reserved
[ 0.288608] system 00:02: [io 0x0c50-0x0c51] has been reserved
[ 0.288612] system 00:02: [io 0x0c52] has been reserved
[ 0.288617] system 00:02: [io 0x0c6c] has been reserved
[ 0.288621] system 00:02: [io 0x0c6f] has been reserved
[ 0.288626] system 00:02: [io 0x0cd0-0x0cd1] has been reserved
[ 0.288630] system 00:02: [io 0x0cd2-0x0cd3] has been reserved
[ 0.288635] system 00:02: [io 0x0cd4-0x0cd5] has been reserved
[ 0.288639] system 00:02: [io 0x0cd6-0x0cd7] has been reserved
[ 0.288644] system 00:02: [io 0x0cd8-0x0cdf] has been reserved
[ 0.288648] system 00:02: [io 0x0800-0x089f] has been reserved
[ 0.288653] system 00:02: [io 0x0b20-0x0b3f] has been reserved
[ 0.288658] system 00:02: [io 0x0900-0x090f] has been reserved
[ 0.288662] system 00:02: [io 0x0910-0x091f] has been reserved
[ 0.288667] system 00:02: [io 0xfe00-0xfefe] has been reserved
[ 0.288673] system 00:02: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.288679] system 00:02: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.288684] system 00:02: [mem 0xfed80000-0xfed8ffff] has been reserved
[ 0.288689] system 00:02: [mem 0xfed61000-0xfed70fff] has been reserved
[ 0.288694] system 00:02: [mem 0xfec10000-0xfec10fff] has been reserved
[ 0.288699] system 00:02: [mem 0xfed00000-0xfed00fff] has been reserved
[ 0.288705] system 00:02: [mem 0xffc00000-0xffffffff] has been reserved
[ 0.288711] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.288934] pnp 00:03: [io 0x0000-0xffffffff disabled]
[ 0.288939] pnp 00:03: [io 0x0300-0x031f]
[ 0.288942] pnp 00:03: [io 0x0290-0x029f]
[ 0.288946] pnp 00:03: [io 0x0230-0x023f]
[ 0.289013] system 00:03: [io 0x0300-0x031f] has been reserved
[ 0.289018] system 00:03: [io 0x0290-0x029f] has been reserved
[ 0.289022] system 00:03: [io 0x0230-0x023f] has been reserved
[ 0.289028] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.289051] pnp 00:04: [dma 4]
[ 0.289055] pnp 00:04: [io 0x0000-0x000f]
[ 0.289059] pnp 00:04: [io 0x0081-0x0083]
[ 0.289062] pnp 00:04: [io 0x0087]
[ 0.289069] pnp 00:04: [io 0x0089-0x008b]
[ 0.289073] pnp 00:04: [io 0x008f]
[ 0.289076] pnp 00:04: [io 0x00c0-0x00df]
[ 0.289113] pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.289131] pnp 00:05: [io 0x0070-0x0071]
[ 0.289147] pnp 00:05: [irq 8]
[ 0.289184] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.289199] pnp 00:06: [io 0x0061]
[ 0.289236] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.289283] pnp 00:07: [io 0x0010-0x001f]
[ 0.289287] pnp 00:07: [io 0x0022-0x003f]
[ 0.289291] pnp 00:07: [io 0x0044-0x005f]
[ 0.289294] pnp 00:07: [io 0x0072-0x007f]
[ 0.289298] pnp 00:07: [io 0x0080]
[ 0.289301] pnp 00:07: [io 0x0084-0x0086]
[ 0.289304] pnp 00:07: [io 0x0088]
[ 0.289308] pnp 00:07: [io 0x008c-0x008e]
[ 0.289311] pnp 00:07: [io 0x0090-0x009f]
[ 0.289315] pnp 00:07: [io 0x00a2-0x00bf]
[ 0.289318] pnp 00:07: [io 0x00e0-0x00ef]
[ 0.289322] pnp 00:07: [io 0x04d0-0x04d1]
[ 0.289393] system 00:07: [io 0x04d0-0x04d1] has been reserved
[ 0.289399] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.289415] pnp 00:08: [io 0x00f0-0x00ff]
[ 0.289423] pnp 00:08: [irq 13]
[ 0.289462] pnp 00:08: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.289547] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.289788] pnp 00:0a: [io 0x03f8-0x03ff]
[ 0.289797] pnp 00:0a: [irq 4]
[ 0.289801] pnp 00:0a: [dma 0 disabled]
[ 0.289905] pnp 00:0a: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.290108] pnp 00:0b: [mem 0x67000000-0x7effffff]
[ 0.290195] system 00:0b: [mem 0x67000000-0x7effffff] could not be reserved
[ 0.290201] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.290414] pnp 00:0c: [mem 0xfed00000-0xfed003ff]
[ 0.290480] pnp 00:0c: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.290491] pnp: PnP ACPI: found 13 devices
[ 0.290494] ACPI: ACPI bus type pnp unregistered
[ 0.327349] PCI: max bus depth: 1 pci_try_num: 2
[ 0.327415] pci 0000:00:04.0: BAR 8: assigned [mem 0x7f000000-0x7f1fffff]
[ 0.327423] pci 0000:00:04.0: BAR 9: assigned [mem 0x7f200000-0x7f3fffff 64bit pref]
[ 0.327432] pci 0000:00:04.0: BAR 7: assigned [io 0x1000-0x1fff]
[ 0.327437] pci 0000:00:04.0: PCI bridge to [bus 01-01]
[ 0.327443] pci 0000:00:04.0: bridge window [io 0x1000-0x1fff]
[ 0.327450] pci 0000:00:04.0: bridge window [mem 0x7f000000-0x7f1fffff]
[ 0.327457] pci 0000:00:04.0: bridge window [mem 0x7f200000-0x7f3fffff 64bit pref]
[ 0.327465] pci 0000:00:14.4: PCI bridge to [bus 02-02]
[ 0.327469] pci 0000:00:14.4: bridge window [io disabled]
[ 0.327476] pci 0000:00:14.4: bridge window [mem disabled]
[ 0.327483] pci 0000:00:14.4: bridge window [mem pref disabled]
[ 0.327493] pci 0000:00:15.0: PCI bridge to [bus 03-03]
[ 0.327496] pci 0000:00:15.0: bridge window [io disabled]
[ 0.327504] pci 0000:00:15.0: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.327510] pci 0000:00:15.0: bridge window [mem pref disabled]
[ 0.327520] pci 0000:00:15.1: PCI bridge to [bus 04-04]
[ 0.327525] pci 0000:00:15.1: bridge window [io 0xe000-0xefff]
[ 0.327532] pci 0000:00:15.1: bridge window [mem disabled]
[ 0.327539] pci 0000:00:15.1: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
[ 0.327549] pci 0000:00:15.2: PCI bridge to [bus 05-05]
[ 0.327552] pci 0000:00:15.2: bridge window [io disabled]
[ 0.327560] pci 0000:00:15.2: bridge window [mem 0xfe900000-0xfe9fffff]
[ 0.327566] pci 0000:00:15.2: bridge window [mem pref disabled]
[ 0.327575] pci 0000:00:15.3: PCI bridge to [bus 06-06]
[ 0.327578] pci 0000:00:15.3: bridge window [io disabled]
[ 0.327586] pci 0000:00:15.3: bridge window [mem 0xfe800000-0xfe8fffff]
[ 0.327592] pci 0000:00:15.3: bridge window [mem pref disabled]
[ 0.327619] pci 0000:00:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.327627] pci 0000:00:04.0: setting latency timer to 64
[ 0.327642] pci 0000:00:15.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.327648] pci 0000:00:15.0: setting latency timer to 64
[ 0.327658] pci 0000:00:15.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.327665] pci 0000:00:15.1: setting latency timer to 64
[ 0.327675] pci 0000:00:15.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.327681] pci 0000:00:15.2: setting latency timer to 64
[ 0.327691] pci 0000:00:15.3: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.327697] pci 0000:00:15.3: setting latency timer to 64
[ 0.327704] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.327708] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.327712] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.327717] pci_bus 0000:00: resource 7 [mem 0x7f000000-0xffffffff]
[ 0.327721] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
[ 0.327726] pci_bus 0000:01: resource 1 [mem 0x7f000000-0x7f1fffff]
[ 0.327730] pci_bus 0000:01: resource 2 [mem 0x7f200000-0x7f3fffff 64bit pref]
[ 0.327735] pci_bus 0000:02: resource 4 [io 0x0000-0x0cf7]
[ 0.327739] pci_bus 0000:02: resource 5 [io 0x0d00-0xffff]
[ 0.327743] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.327748] pci_bus 0000:02: resource 7 [mem 0x7f000000-0xffffffff]
[ 0.327752] pci_bus 0000:03: resource 1 [mem 0xfea00000-0xfeafffff]
[ 0.327756] pci_bus 0000:04: resource 0 [io 0xe000-0xefff]
[ 0.327761] pci_bus 0000:04: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref]
[ 0.327765] pci_bus 0000:05: resource 1 [mem 0xfe900000-0xfe9fffff]
[ 0.327770] pci_bus 0000:06: resource 1 [mem 0xfe800000-0xfe8fffff]
[ 0.327843] NET: Registered protocol family 2
[ 0.327946] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.328272] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.328868] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.329172] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.329177] TCP reno registered
[ 0.329186] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.329203] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.329420] NET: Registered protocol family 1
[ 0.329821] RPC: Registered named UNIX socket transport module.
[ 0.329829] RPC: Registered udp transport module.
[ 0.329832] RPC: Registered tcp transport module.
[ 0.329835] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.329855] pci 0000:00:01.0: Boot video device
[ 1.170365] PCI: CLS 64 bytes, default 64
[ 1.181513] highmem bounce pool size: 64 pages
[ 1.193989] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 1.194726] fuse init (API version 7.16)
[ 1.194865] msgmni has been set to 1729
[ 1.196177] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.196184] io scheduler noop registered
[ 1.196209] io scheduler cfq registered (default)
[ 1.196944] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 1.196955] ACPI: Power Button [PWRB]
[ 1.197052] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 1.197058] ACPI: Power Button [PWRF]
[ 1.197328] ACPI: acpi_idle registered with cpuidle
[ 1.199633] Linux agpgart interface v0.103
[ 1.201563] brd: module loaded
[ 1.202544] loop: module loaded
[ 1.202654] ahci 0000:00:11.0: version 3.0
[ 1.202681] ahci 0000:00:11.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 1.202861] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
[ 1.202869] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
[ 1.204609] scsi0 : ahci
[ 1.204968] scsi1 : ahci
[ 1.205292] scsi2 : ahci
[ 1.205573] scsi3 : ahci
[ 1.205794] scsi4 : ahci
[ 1.205976] scsi5 : ahci
[ 1.206098] ata1: SATA max UDMA/133 abar m1024@0xfeb4b000 port 0xfeb4b100 irq 19
[ 1.206104] ata2: SATA max UDMA/133 abar m1024@0xfeb4b000 port 0xfeb4b180 irq 19
[ 1.206110] ata3: SATA max UDMA/133 abar m1024@0xfeb4b000 port 0xfeb4b200 irq 19
[ 1.206116] ata4: SATA max UDMA/133 abar m1024@0xfeb4b000 port 0xfeb4b280 irq 19
[ 1.206121] ata5: SATA max UDMA/133 abar m1024@0xfeb4b000 port 0xfeb4b300 irq 19
[ 1.206127] ata6: SATA max UDMA/133 abar m1024@0xfeb4b000 port 0xfeb4b380 irq 19
[ 1.206384] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.206431] r8169 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.206486] r8169 0000:04:00.0: setting latency timer to 64
[ 1.206556] r8169 0000:04:00.0: irq 40 for MSI/MSI-X
[ 1.206916] r8169 0000:04:00.0: eth0: RTL8168e/8111e at 0xf802c000, 14:da:e9:67:fd:0a, XID 0c200000 IRQ 40
[ 1.206975] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.206996] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.207015] ehci_hcd 0000:00:12.2: EHCI Host Controller
[ 1.207028] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 1.207042] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.207074] QUIRK: Enable AMD PLL fix
[ 1.207092] ehci_hcd 0000:00:12.2: debug port 1
[ 1.207257] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfeb49000
[ 1.216906] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 1.217204] hub 1-0:1.0: USB hub found
[ 1.217213] hub 1-0:1.0: 5 ports detected
[ 1.217335] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.217365] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 1.217375] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 1.217388] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.217423] ehci_hcd 0000:00:13.2: debug port 1
[ 1.217682] ehci_hcd 0000:00:13.2: irq 17, io mem 0xfeb47000
[ 1.226900] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 1.227202] hub 2-0:1.0: USB hub found
[ 1.227211] hub 2-0:1.0: 5 ports detected
[ 1.227331] ehci_hcd 0000:00:16.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.227364] ehci_hcd 0000:00:16.2: EHCI Host Controller
[ 1.227375] ehci_hcd 0000:00:16.2: new USB bus registered, assigned bus number 3
[ 1.227388] ehci_hcd 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.227422] ehci_hcd 0000:00:16.2: debug port 1
[ 1.227685] ehci_hcd 0000:00:16.2: irq 17, io mem 0xfeb44000
[ 1.236919] ehci_hcd 0000:00:16.2: USB 2.0 started, EHCI 1.00
[ 1.237239] hub 3-0:1.0: USB hub found
[ 1.237249] hub 3-0:1.0: 4 ports detected
[ 1.237370] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.237406] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.237437] ohci_hcd 0000:00:12.0: OHCI Host Controller
[ 1.237448] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 4
[ 1.237708] ohci_hcd 0000:00:12.0: irq 18, io mem 0xfeb4a000
[ 1.294539] hub 4-0:1.0: USB hub found
[ 1.294553] hub 4-0:1.0: 5 ports detected
[ 1.294671] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.294705] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 1.294715] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
[ 1.294954] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfeb48000
[ 1.351141] hub 5-0:1.0: USB hub found
[ 1.351155] hub 5-0:1.0: 5 ports detected
[ 1.351271] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.351305] ohci_hcd 0000:00:14.5: OHCI Host Controller
[ 1.351316] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 6
[ 1.351560] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfeb46000
[ 1.407846] hub 6-0:1.0: USB hub found
[ 1.407859] hub 6-0:1.0: 2 ports detected
[ 1.407970] ohci_hcd 0000:00:16.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.408002] ohci_hcd 0000:00:16.0: OHCI Host Controller
[ 1.408013] ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 7
[ 1.408255] ohci_hcd 0000:00:16.0: irq 18, io mem 0xfeb45000
[ 1.464477] hub 7-0:1.0: USB hub found
[ 1.464491] hub 7-0:1.0: 4 ports detected
[ 1.464635] xhci_hcd 0000:05:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.464668] xhci_hcd 0000:05:00.0: setting latency timer to 64
[ 1.464675] xhci_hcd 0000:05:00.0: xHCI Host Controller
[ 1.464688] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 8
[ 1.465065] xhci_hcd 0000:05:00.0: irq 18, io mem 0xfe900000
[ 1.465230] xhci_hcd 0000:05:00.0: irq 41 for MSI/MSI-X
[ 1.465239] xhci_hcd 0000:05:00.0: irq 42 for MSI/MSI-X
[ 1.465245] xhci_hcd 0000:05:00.0: irq 43 for MSI/MSI-X
[ 1.466078] xHCI xhci_add_endpoint called for root hub
[ 1.466085] xHCI xhci_check_bandwidth called for root hub
[ 1.466132] hub 8-0:1.0: USB hub found
[ 1.466145] hub 8-0:1.0: 2 ports detected
[ 1.466241] xhci_hcd 0000:05:00.0: xHCI Host Controller
[ 1.466250] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 9
[ 1.468285] xHCI xhci_add_endpoint called for root hub
[ 1.468289] xHCI xhci_check_bandwidth called for root hub
[ 1.468328] hub 9-0:1.0: USB hub found
[ 1.468341] hub 9-0:1.0: 2 ports detected
[ 1.468429] xhci_hcd 0000:06:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 1.468462] xhci_hcd 0000:06:00.0: setting latency timer to 64
[ 1.468468] xhci_hcd 0000:06:00.0: xHCI Host Controller
[ 1.468477] xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 10
[ 1.468855] xhci_hcd 0000:06:00.0: irq 19, io mem 0xfe800000
[ 1.469015] xhci_hcd 0000:06:00.0: irq 44 for MSI/MSI-X
[ 1.469024] xhci_hcd 0000:06:00.0: irq 45 for MSI/MSI-X
[ 1.469030] xhci_hcd 0000:06:00.0: irq 46 for MSI/MSI-X
[ 1.469894] xHCI xhci_add_endpoint called for root hub
[ 1.469901] xHCI xhci_check_bandwidth called for root hub
[ 1.469954] hub 10-0:1.0: USB hub found
[ 1.469967] hub 10-0:1.0: 2 ports detected
[ 1.470111] xhci_hcd 0000:06:00.0: xHCI Host Controller
[ 1.470124] xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 11
[ 1.472074] xHCI xhci_add_endpoint called for root hub
[ 1.472078] xHCI xhci_check_bandwidth called for root hub
[ 1.472118] hub 11-0:1.0: USB hub found
[ 1.472130] hub 11-0:1.0: 2 ports detected
[ 1.472224] Initializing USB Mass Storage driver...
[ 1.472308] usbcore: registered new interface driver usb-storage
[ 1.472312] USB Mass Storage support registered.
[ 1.472389] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 1.473519] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.473606] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.473738] mousedev: PS/2 mouse device common for all mice
[ 1.474150] rtc_cmos 00:05: RTC can wake from S4
[ 1.474273] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 1.474526] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.474562] i2c /dev entries driver
[ 1.474627] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 1.474779] lirc_dev: IR Remote Control driver registered, major 252
[ 1.474783] IR NEC protocol handler initialized
[ 1.474787] IR RC5(x) protocol handler initialized
[ 1.474790] IR RC6 protocol handler initialized
[ 1.474793] IR JVC protocol handler initialized
[ 1.474796] IR Sony protocol handler initialized
[ 1.474799] IR RC5 (streamzap) protocol handler initialized
[ 1.474802] Linux video capture interface: v2.00
[ 1.475005] cpuidle: using governor ladder
[ 1.475183] usbcore: registered new interface driver usbhid
[ 1.475187] usbhid: USB HID core driver
[ 1.475190] ALSA device list:
[ 1.475192] No soundcards found.
[ 1.475196] Netfilter messages via NETLINK v0.30.
[ 1.475536] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 1.475572] TCP cubic registered
[ 1.475836] NET: Registered protocol family 10
[ 1.476934] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 1.476962] NET: Registered protocol family 17
[ 1.476979] lib80211: common routines for IEEE802.11 drivers
[ 1.476983] lib80211_crypt: registered algorithm 'NULL'
[ 1.476987] Registering the dns_resolver key type
[ 1.477015] Using IPI No-Shortcut mode
[ 1.482622] rtc_cmos 00:05: setting system clock to 2011-08-24 21:12:38 UTC (1314220358)
[ 1.482640] powernow-k8: Found 1 AMD E-350 Processor (2 cpu cores) (version 2.20.00)
[ 1.482700] powernow-k8: 0 : pstate 0 (1600 MHz)
[ 1.482704] powernow-k8: 1 : pstate 1 (1280 MHz)
[ 1.482707] powernow-k8: 2 : pstate 2 (800 MHz)
[ 1.523599] ata1: SATA link down (SStatus 0 SControl 300)
[ 1.526921] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.526981] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.527021] ata6: SATA link down (SStatus 0 SControl 300)
[ 1.527057] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.690269] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.707735] ata2.00: ATAPI: TSSTcorp CDDVDW SN-T083C, SB00, max UDMA/100
[ 1.707752] ata2.00: applying bridge limits
[ 1.726501] ata2.00: configured for UDMA/100
[ 1.732545] scsi 1:0:0:0: CD-ROM TSSTcorp CDDVDW SN-T083C SB00 PQ: 0 ANSI: 5
[ 1.739961] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.739976] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.740348] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.740538] sr 1:0:0:0: Attached scsi generic sg0 type 5
[ 1.741119] Freeing unused kernel memory: 4096k freed
[ 1.826919] usb 4-3: new low speed USB device number 2 using ohci_hcd
[ 1.993124] input: Lenovo Mini Wireless Keyboard as /devices/pci0000:00/0000:00:12.0/usb4/4-3/4-3:1.0/input/input2
[ 1.993447] generic-usb 0003:17EF:6014.0001: input,hidraw0: USB HID v1.11 Keyboard [Lenovo Mini Wireless Keyboard] on usb-0000:00:12.0-3/input0
[ 2.004485] input: Lenovo Mini Wireless Keyboard as /devices/pci0000:00/0000:00:12.0/usb4/4-3/4-3:1.1/input/input3
[ 2.004914] generic-usb 0003:17EF:6014.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Lenovo Mini Wireless Keyboard] on usb-0000:00:12.0-3/input1
[ 2.176906] Refined TSC clocksource calibration: 1599.934 MHz.
[ 2.176925] Switching to clocksource tsc
[ 2.253579] usb 4-5: new full speed USB device number 3 using ohci_hcd
[ 2.386910] usb 4-5: device descriptor read/64, error -62
[ 2.623577] usb 4-5: device descriptor read/64, error -62
[ 2.856928] usb 4-5: new full speed USB device number 4 using ohci_hcd
[ 2.990244] usb 4-5: device descriptor read/64, error -62
[ 3.226911] usb 4-5: device descriptor read/64, error -62
[ 3.460245] usb 4-5: new full speed USB device number 5 using ohci_hcd
[ 3.866895] usb 4-5: device not accepting address 5, error -62
[ 3.996911] usb 4-5: new full speed USB device number 6 using ohci_hcd
[ 4.403566] usb 4-5: device not accepting address 6, error -62
[ 4.403607] hub 4-0:1.0: unable to enumerate USB device on port 5
[ 4.510250] usb 2-5: new high speed USB device number 2 using ehci_hcd
[ 4.638307] scsi6 : usb-storage 2-5:1.0
[ 4.993592] usb 7-3: new full speed USB device number 2 using ohci_hcd
[ 5.767281] scsi 6:0:0:0: Direct-Access Multiple Card Reader 1.00 PQ: 0 ANSI: 0
[ 5.771024] sd 6:0:0:0: Attached scsi generic sg1 type 0
[ 6.853916] sd 6:0:0:0: [sda] 30916608 512-byte logical blocks: (15.8 GB/14.7 GiB)
[ 6.854926] sd 6:0:0:0: [sda] Write Protect is off
[ 6.854943] sd 6:0:0:0: [sda] Mode Sense: 03 00 00 00
[ 6.855816] sd 6:0:0:0: [sda] No Caching mode page present
[ 6.855831] sd 6:0:0:0: [sda] Assuming drive cache: write through
[ 6.861054] sd 6:0:0:0: [sda] No Caching mode page present
[ 6.861067] sd 6:0:0:0: [sda] Assuming drive cache: write through
[ 6.862727] sda: sda1 sda2
[ 6.867047] sd 6:0:0:0: [sda] No Caching mode page present
[ 6.867062] sd 6:0:0:0: [sda] Assuming drive cache: write through
[ 6.867073] sd 6:0:0:0: [sda] Attached SCSI removable disk
[ 7.049628] EXT4-fs (sda1): couldn't mount as ext3 due to feature incompatibilities
[ 7.067394] EXT4-fs (sda1): couldn't mount as ext2 due to feature incompatibilities
[ 7.093034] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 7.192433] EXT4-fs (sda2): couldn't mount as ext3 due to feature incompatibilities
[ 7.207982] EXT4-fs (sda2): couldn't mount as ext2 due to feature incompatibilities
[ 13.983334] EXT4-fs (sda2): recovery complete
[ 13.989329] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
>[ 14.661099] udevd[191]: starting version 173
[ 14.970521] wmi: Mapper loaded
[ 15.346585] HDA Intel 0000:00:01.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 15.346659] HDA Intel 0000:00:01.1: irq 47 for MSI/MSI-X
[ 15.346949] HDA Intel 0000:00:01.1: setting latency timer to 64
[ 15.368966] Bluetooth: Atheros AR30xx firmware driver ver 1.0
[ 15.401572] HDMI status: Pin=3 Presence_Detect=0 ELD_Valid=0
[ 15.408086] input: HD-Audio Generic HDMI/DP as /devices/pci0000:00/0000:00:01.1/sound/card0/input4
[ 15.566802] ath9k 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 15.566821] ath9k 0000:03:00.0: setting latency timer to 64
[ 15.664903] ath: EEPROM regdomain: 0x60
[ 15.664909] ath: EEPROM indicates we should expect a direct regpair map
[ 15.664915] ath: Country alpha2 being used: 00
[ 15.664919] ath: Regpair used: 0x60
[ 15.699025] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 15.699035] Disabling lock debugging due to kernel taint
[ 15.705808] [fglrx] Maximum main memory to use for locked dma buffers: 1515 MBytes.
[ 15.705898] [fglrx] vendor: 1002 device: 9802 count: 1
[ 15.706848] [fglrx] ioport: bar 1, base 0xf000, size: 0x100
[ 15.706869] pci 0000:00:01.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 15.706878] pci 0000:00:01.0: setting latency timer to 64
[ 15.707738] [fglrx] Kernel PAT support is enabled
[ 15.707776] [fglrx] module loaded - fglrx 8.88.7 [Jul 28 2011] with 1 minors
[ 15.713904] r8169 0000:04:00.0: eth0: link down
[ 15.713921] r8169 0000:04:00.0: eth0: link down
[ 15.714176] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 15.714250] ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control'
[ 15.715513] Registered led device: ath9k-phy0
[ 15.716124] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xf88e0000, irq=16
[ 15.863149] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 15.872707] usb 7-3: USB disconnect, device number 2
[ 15.873922] usbcore: registered new interface driver ath3k
[ 17.250108] usb 7-3: new full speed USB device number 3 using ohci_hcd
[ 17.456264] Bluetooth: Core ver 2.16
[ 17.456749] NET: Registered protocol family 31
[ 17.456754] Bluetooth: HCI device and connection manager initialized
[ 17.456760] Bluetooth: HCI socket layer initialized
[ 17.456764] Bluetooth: L2CAP socket layer initialized
[ 17.460028] Bluetooth: SCO socket layer initialized
[ 17.471261] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 17.473031] usbcore: registered new interface driver btusb
[ 18.246367] r8169 0000:04:00.0: eth0: link up
[ 18.246593] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 18.547140] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 18.547146] Bluetooth: BNEP filters: protocol multicast
[ 18.957333] fglrx_pci 0000:00:01.0: irq 48 for MSI/MSI-X
[ 18.958297] [fglrx] Firegl kernel thread PID: 848
[ 18.958382] [fglrx] Firegl kernel thread PID: 849
[ 18.958467] [fglrx] Firegl kernel thread PID: 850
[ 18.958730] [fglrx] IRQ 48 Enabled
[ 19.365037] [fglrx] Gart USWC size:508 M.
[ 19.365045] [fglrx] Gart cacheable size:199 M.
[ 19.365056] [fglrx] Reserved FB block: Shared offset:0, size:1000000
[ 19.365061] [fglrx] Reserved FB block: Unshared offset:fe67000, size:199000
[ 19.365067] [fglrx] Reserved FB block: Unshared offset:17ff4000, size:c000
[ 19.610073] hci_cmd_timer: hci0 command tx timeout
[ 20.636880] hci_cmd_timer: hci0 command tx timeout
[ 21.640211] hci_cmd_timer: hci0 command tx timeout
[ 24.320557] EXT4-fs (sda1): re-mounted. Opts: barrier=1,data=ordered,commit=0
[ 26.180774] EXT4-fs (sda2): re-mounted. Opts: barrier=1,data=ordered,commit=0
root /var/log #
');


Re: Remote receiver does not work on boot - reynard80 - 08-24-2011

After dis- and reconnecting USB IR receiver:
Code:
root /var/log # dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.0.3 (sraue@fedora.scdemo.local) (gcc version 4.5.3 (GCC) ) #1 SMP PREEMPT Fri Aug 19 22:03:50 BST 2011
[ 0.000000] KERNEL supported cpus:
[ 0.000000] AMD AuthenticAMD
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009d800 (usable)
[ 0.000000] BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 0000000066a1a000 (usable)
[ 0.000000] BIOS-e820: 0000000066a1a000 - 0000000066a6e000 (ACPI NVS)
[ 0.000000] BIOS-e820: 0000000066a6e000 - 0000000066cb5000 (reserved)
[ 0.000000] BIOS-e820: 0000000066cb5000 - 0000000066cc6000 (ACPI NVS)
[ 0.000000] BIOS-e820: 0000000066cc6000 - 0000000066cdc000 (reserved)
[ 0.000000] BIOS-e820: 0000000066cdc000 - 0000000066cde000 (ACPI NVS)
[ 0.000000] BIOS-e820: 0000000066cde000 - 0000000066cdf000 (reserved)
[ 0.000000] BIOS-e820: 0000000066cdf000 - 0000000066ce5000 (ACPI NVS)
[ 0.000000] BIOS-e820: 0000000066ce5000 - 0000000066d49000 (reserved)
[ 0.000000] BIOS-e820: 0000000066d49000 - 0000000066d8c000 (ACPI NVS)
[ 0.000000] BIOS-e820: 0000000066d8c000 - 0000000066f00000 (usable)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec10000 - 00000000fec11000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed61000 - 00000000fed71000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed80000 - 00000000fed90000 (reserved)
[ 0.000000] BIOS-e820: 00000000fef00000 - 0000000100000000 (reserved)
[ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[ 0.000000] DMI 2.6 present.
[ 0.000000] DMI: System manufacturer System Product Name/E35M1-I DELUXE, BIOS 1202 04/13/2011
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x66f00 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF write-through
[ 0.000000] C0000-CEFFF write-protect
[ 0.000000] CF000-E7FFF uncachable
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 066F00000 mask FFFF00000 uncachable
[ 0.000000] 2 base 067000000 mask FFF000000 uncachable
[ 0.000000] 3 base 068000000 mask FF8000000 uncachable
[ 0.000000] 4 base 070000000 mask FF0000000 uncachable
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [c00fcd90] fcd90
[ 0.000000] initial memory mapped : 0 - 01c00000
[ 0.000000] Base memory trampoline at [c0099000] 99000 size 16384
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 1bfb000-1c00000
[ 0.000000] ACPI: RSDP 000f0430 00024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 66a63068 00054 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 66a694d0 000F4 (v04 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20110413/tbfadt-560)
[ 0.000000] ACPI: DSDT 66a63150 0637C (v02 ALASKA A M I 00000000 INTL 20051117)
[ 0.000000] ACPI: FACS 66cdff80 00040
[ 0.000000] ACPI: APIC 66a695c8 00062 (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: MCFG 66a69630 0003C (v01 ALASKA A M I 01072009 MSFT 00010013)
[ 0.000000] ACPI: HPET 66a69670 00038 (v01 ALASKA A M I 01072009 AMI 00000004)
[ 0.000000] ACPI: SSDT 66a696a8 003DE (v01 AMD POWERNOW 00000001 AMD 00000001)
[ 0.000000] ACPI: SSDT 66a69a88 012FA (v02 AMD ALIB 00000001 MSFT 04000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 759MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x00066f00
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009d
[ 0.000000] 0: 0x00000100 -> 0x00066a1a
[ 0.000000] 0: 0x00066d8c -> 0x00066f00
[ 0.000000] On node 0 totalpages: 420635
[ 0.000000] free_area_init_node: node 0, pgdat c1482b00, node_mem_map f6b1d200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3949 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 1519 pages used for memmap
[ 0.000000] HighMem zone: 191905 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 0, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] Allocating PCI resources starting at 66f00000 (gap: 66f00000:97d00000)
[ 0.000000] setup_percpu: NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 11 pages/cpu @f6400000 s21888 r0 d23168 u2097152
[ 0.000000] pcpu-alloc: s21888 r0 d23168 u2097152 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 417340
[ 0.000000] Kernel command line: fastboot root=/dev/ram0 rdinit=/init threadirqs boot=LABEL=System disk=LABEL=Storage quiet BOOT_IMAGE=/KERNEL
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (000377fe:00066f00)
[ 0.000000] Memory: 1659416k/1686528k available (3552k kernel code, 23124k reserved, 1084k data, 4096k init, 773696k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff67000 - 0xfffff000 ( 608 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc1488000 - 0xc1888000 (4096 kB)
[ 0.000000] .data : 0xc1378008 - 0xc14873c0 (1084 kB)
[ 0.000000] .text : 0xc1000000 - 0xc1378008 (3552 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] NR_IRQS:384
[ 0.000000] CPU 0 irqstacks, hard=f600c000 soft=f600e000
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1599.820 MHz processor.
[ 0.003338] Calibrating delay loop (skipped), value calculated using timer frequency.. 3200.95 BogoMIPS (lpj=5332733)
[ 0.003346] pid_max: default: 32768 minimum: 301
[ 0.006712] Mount-cache hash table entries: 512
[ 0.007022] Initializing cgroup subsys cpuacct
[ 0.007046] Initializing cgroup subsys freezer
[ 0.007075] CPU: Physical Processor ID: 0
[ 0.007078] CPU: Processor Core ID: 0
[ 0.007220] ACPI: Core revision 20110413
[ 0.013415] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.013722] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.049056] CPU0: AMD E-350 Processor stepping 00
[ 0.049997] Performance Events: AMD PMU driver.
[ 0.049997] ... version: 0
[ 0.049997] ... bit width: 48
[ 0.049997] ... generic registers: 4
[ 0.049997] ... value mask: 0000ffffffffffff
[ 0.049997] ... max period: 00007fffffffffff
[ 0.049997] ... fixed-purpose events: 0
[ 0.049997] ... event mask: 000000000000000f
[ 0.086757] CPU 1 irqstacks, hard=f60c8000 soft=f60ca000
[ 0.086769] Booting Node 0, Processors #1 Ok.
[ 0.086776] smpboot cpu 1: start_ip = 99000
[ 0.006666] Initializing CPU#1
[ 0.183344] Brought up 2 CPUs
[ 0.183349] Total of 2 processors activated (6402.08 BogoMIPS).
[ 0.184168] devtmpfs: initialized
[ 0.184570] NET: Registered protocol family 16
[ 0.184778] Extended Config Space enabled on 0 nodes
[ 0.184790] ACPI: bus type pci registered
[ 0.184860] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.184867] PCI: not using MMCONFIG
[ 0.201838] PCI: Using configuration type 1 for base access
[ 0.201841] PCI: Using configuration type 1 for extended access
[ 0.201875] mtrr: your CPUs had inconsistent fixed MTRR settings
[ 0.201879] mtrr: probably your BIOS does not setup all CPUs.
[ 0.201882] mtrr: corrected configuration.
[ 0.204407] bio: create slab <bio-0> at 0
[ 0.206406] ACPI: EC: Look up EC in DSDT
[ 0.208318] ACPI: Executed 3 blocks of module-level executable AML code
[ 0.211921] ACPI Error: [RAMB] Namespace lookup failure, AE_NOT_FOUND (20110413/psargs-359)
[ 0.211935] ACPI Exception: AE_NOT_FOUND, Could not execute arguments for [RAMW] (Region) (20110413/nsinit-349)
[ 0.224045] ACPI: Interpreter enabled
[ 0.224055] ACPI: (supports S0 S3 S5)
[ 0.224085] ACPI: Using IOAPIC for interrupt routing
[ 0.224332] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.224409] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.224414] PCI: Using MMCONFIG for extended config space
[ 0.232921] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.233142] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.233583] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
[ 0.233589] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
[ 0.233594] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.233599] pci_root PNP0A03:00: host bridge window [mem 0x000c8000-0x000dffff]
[ 0.233604] pci_root PNP0A03:00: host bridge window [mem 0x7f000000-0xffffffff]
[ 0.233618] pci_root PNP0A03:00: address space collision: host bridge window [mem 0x000c8000-0x000dffff] conflicts with Video ROM [mem 0x000c0000-0x000ce1ff]
[ 0.233637] pci 0000:00:00.0: [1022:1510] type 0 class 0x000600
[ 0.233694] pci 0000:00:01.0: [1002:9802] type 0 class 0x000300
[ 0.233710] pci 0000:00:01.0: reg 10: [mem 0xc0000000-0xcfffffff pref]
[ 0.233721] pci 0000:00:01.0: reg 14: [io 0xf000-0xf0ff]
[ 0.233732] pci 0000:00:01.0: reg 18: [mem 0xfeb00000-0xfeb3ffff]
[ 0.233755] pci 0000:00:01.0: reg 24: [mem 0xfe700000-0xfe7fffff]
[ 0.233784] pci 0000:00:01.0: supports D1 D2
[ 0.233807] pci 0000:00:01.1: [1002:1314] type 0 class 0x000403
[ 0.233821] pci 0000:00:01.1: reg 10: [mem 0xfeb40000-0xfeb43fff]
[ 0.233881] pci 0000:00:01.1: supports D1 D2
[ 0.233912] pci 0000:00:04.0: [1022:1512] type 1 class 0x000604
[ 0.233972] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[ 0.233979] pci 0000:00:04.0: PME# disabled
[ 0.234028] pci 0000:00:11.0: [1002:4391] type 0 class 0x000106
[ 0.234055] pci 0000:00:11.0: reg 10: [io 0xf140-0xf147]
[ 0.234069] pci 0000:00:11.0: reg 14: [io 0xf130-0xf133]
[ 0.234084] pci 0000:00:11.0: reg 18: [io 0xf120-0xf127]
[ 0.234098] pci 0000:00:11.0: reg 1c: [io 0xf110-0xf113]
[ 0.234113] pci 0000:00:11.0: reg 20: [io 0xf100-0xf10f]
[ 0.234127] pci 0000:00:11.0: reg 24: [mem 0xfeb4b000-0xfeb4b3ff]
[ 0.234190] pci 0000:00:12.0: [1002:4397] type 0 class 0x000c03
[ 0.234210] pci 0000:00:12.0: reg 10: [mem 0xfeb4a000-0xfeb4afff]
[ 0.234304] pci 0000:00:12.2: [1002:4396] type 0 class 0x000c03
[ 0.234330] pci 0000:00:12.2: reg 10: [mem 0xfeb49000-0xfeb490ff]
[ 0.234423] pci 0000:00:12.2: supports D1 D2
[ 0.234427] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.234434] pci 0000:00:12.2: PME# disabled
[ 0.234463] pci 0000:00:13.0: [1002:4397] type 0 class 0x000c03
[ 0.234482] pci 0000:00:13.0: reg 10: [mem 0xfeb48000-0xfeb48fff]
[ 0.234576] pci 0000:00:13.2: [1002:4396] type 0 class 0x000c03
[ 0.234603] pci 0000:00:13.2: reg 10: [mem 0xfeb47000-0xfeb470ff]
[ 0.234696] pci 0000:00:13.2: supports D1 D2
[ 0.234700] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.234706] pci 0000:00:13.2: PME# disabled
[ 0.234735] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05
[ 0.234836] pci 0000:00:14.3: [1002:439d] type 0 class 0x000601
[ 0.234939] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604
[ 0.234995] pci 0000:00:14.5: [1002:4399] type 0 class 0x000c03
[ 0.235014] pci 0000:00:14.5: reg 10: [mem 0xfeb46000-0xfeb46fff]
[ 0.235108] pci 0000:00:15.0: [1002:43a0] type 1 class 0x000604
[ 0.235188] pci 0000:00:15.0: supports D1 D2
[ 0.235222] pci 0000:00:15.1: [1002:43a1] type 1 class 0x000604
[ 0.235301] pci 0000:00:15.1: supports D1 D2
[ 0.235335] pci 0000:00:15.2: [1002:43a2] type 1 class 0x000604
[ 0.235414] pci 0000:00:15.2: supports D1 D2
[ 0.235448] pci 0000:00:15.3: [1002:43a3] type 1 class 0x000604
[ 0.235527] pci 0000:00:15.3: supports D1 D2
[ 0.235562] pci 0000:00:16.0: [1002:4397] type 0 class 0x000c03
[ 0.235581] pci 0000:00:16.0: reg 10: [mem 0xfeb45000-0xfeb45fff]
[ 0.235675] pci 0000:00:16.2: [1002:4396] type 0 class 0x000c03
[ 0.235702] pci 0000:00:16.2: reg 10: [mem 0xfeb44000-0xfeb440ff]
[ 0.235794] pci 0000:00:16.2: supports D1 D2
[ 0.235798] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
[ 0.235805] pci 0000:00:16.2: PME# disabled
[ 0.235834] pci 0000:00:18.0: [1022:1700] type 0 class 0x000600
[ 0.235880] pci 0000:00:18.1: [1022:1701] type 0 class 0x000600
[ 0.235922] pci 0000:00:18.2: [1022:1702] type 0 class 0x000600
[ 0.235967] pci 0000:00:18.3: [1022:1703] type 0 class 0x000600
[ 0.236019] pci 0000:00:18.4: [1022:1704] type 0 class 0x000600
[ 0.236062] pci 0000:00:18.5: [1022:1718] type 0 class 0x000600
[ 0.236104] pci 0000:00:18.6: [1022:1716] type 0 class 0x000600
[ 0.236147] pci 0000:00:18.7: [1022:1719] type 0 class 0x000600
[ 0.236243] pci 0000:00:04.0: PCI bridge to [bus 01-01]
[ 0.236252] pci 0000:00:04.0: bridge window [io 0xfff000-0x0000] (disabled)
[ 0.236259] pci 0000:00:04.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.236269] pci 0000:00:04.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.236347] pci 0000:00:14.4: PCI bridge to [bus 02-02] (subtractive decode)
[ 0.236354] pci 0000:00:14.4: bridge window [io 0xf000-0x0000] (disabled)
[ 0.236361] pci 0000:00:14.4: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.236369] pci 0000:00:14.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.236374] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.236379] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.236384] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.236389] pci 0000:00:14.4: bridge window [mem 0x7f000000-0xffffffff] (subtractive decode)
[ 0.236483] pci 0000:03:00.0: [168c:002b] type 0 class 0x000280
[ 0.236517] pci 0000:03:00.0: reg 10: [mem 0xfea00000-0xfea0ffff 64bit]
[ 0.236631] pci 0000:03:00.0: supports D1
[ 0.236634] pci 0000:03:00.0: PME# supported from D0 D1 D3hot D3cold
[ 0.236642] pci 0000:03:00.0: PME# disabled
[ 0.243403] pci 0000:00:15.0: PCI bridge to [bus 03-03]
[ 0.243425] pci 0000:00:15.0: bridge window [io 0xfff000-0x0000] (disabled)
[ 0.243440] pci 0000:00:15.0: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.243454] pci 0000:00:15.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.243557] pci 0000:04:00.0: [10ec:8168] type 0 class 0x000200
[ 0.243585] pci 0000:04:00.0: reg 10: [io 0xe000-0xe0ff]
[ 0.243626] pci 0000:04:00.0: reg 18: [mem 0xd0004000-0xd0004fff 64bit pref]
[ 0.243653] pci 0000:04:00.0: reg 20: [mem 0xd0000000-0xd0003fff 64bit pref]
[ 0.243726] pci 0000:04:00.0: supports D1 D2
[ 0.243730] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.243738] pci 0000:04:00.0: PME# disabled
[ 0.250071] pci 0000:00:15.1: PCI bridge to [bus 04-04]
[ 0.250094] pci 0000:00:15.1: bridge window [io 0xe000-0xefff]
[ 0.250108] pci 0000:00:15.1: bridge window [mem 0xfff00000-0x000fffff] (disabled)
[ 0.250121] pci 0000:00:15.1: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
[ 0.250228] pci 0000:05:00.0: [1033:0194] type 0 class 0x000c03
[ 0.250263] pci 0000:05:00.0: reg 10: [mem 0xfe900000-0xfe901fff 64bit]
[ 0.250388] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
[ 0.250396] pci 0000:05:00.0: PME# disabled
[ 0.256736] pci 0000:00:15.2: PCI bridge to [bus 05-05]
[ 0.256758] pci 0000:00:15.2: bridge window [io 0xfff000-0x0000] (disabled)
[ 0.256773] pci 0000:00:15.2: bridge window [mem 0xfe900000-0xfe9fffff]
[ 0.256786] pci 0000:00:15.2: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.256893] pci 0000:06:00.0: [1033:0194] type 0 class 0x000c03
[ 0.256928] pci 0000:06:00.0: reg 10: [mem 0xfe800000-0xfe801fff 64bit]
[ 0.257052] pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
[ 0.257061] pci 0000:06:00.0: PME# disabled
[ 0.263404] pci 0000:00:15.3: PCI bridge to [bus 06-06]
[ 0.263426] pci 0000:00:15.3: bridge window [io 0xfff000-0x0000] (disabled)
[ 0.263441] pci 0000:00:15.3: bridge window [mem 0xfe800000-0xfe8fffff]
[ 0.263454] pci 0000:00:15.3: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.263496] pci_bus 0000:00: on NUMA node 0
[ 0.263509] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.263806] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE20._PRT]
[ 0.263864] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE21._PRT]
[ 0.263927] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE22._PRT]
[ 0.263982] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE23._PRT]
[ 0.264056] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR14._PRT]
[ 0.264117] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.264123] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[ 0.264127] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.273279] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 10 11 14 15) *0
[ 0.273411] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 11 14 15) *0
[ 0.273527] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 11 14 15) *0
[ 0.273639] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 10 11 14 15) *0
[ 0.273731] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 14 15) *0
[ 0.273803] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 14 15) *0
[ 0.273875] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 10 11 14 15) *0
[ 0.273946] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 14 15) *0
[ 0.274069] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.274090] vgaarb: loaded
[ 0.274093] vgaarb: bridge control possible 0000:00:01.0
[ 0.274241] SCSI subsystem initialized
[ 0.274427] libata version 3.00 loaded.
[ 0.274475] usbcore: registered new interface driver usbfs
[ 0.274495] usbcore: registered new interface driver hub
[ 0.274851] usbcore: registered new device driver usb
[ 0.274964] Advanced Linux Sound Architecture Driver Version 1.0.24.
[ 0.274969] PCI: Using ACPI for IRQ routing
[ 0.285816] PCI: pci_cache_line_size set to 64 bytes
[ 0.285960] reserve RAM buffer: 000000000009d800 - 000000000009ffff
[ 0.285965] reserve RAM buffer: 0000000066a1a000 - 0000000067ffffff
[ 0.285972] reserve RAM buffer: 0000000066f00000 - 0000000067ffffff
[ 0.286216] cfg80211: Calling CRDA to update world regulatory domain
[ 0.286890] Switching to clocksource hpet
[ 0.287053] pnp: PnP ACPI init
[ 0.287068] ACPI: bus type pnp registered
[ 0.287368] pnp 00:00: [bus 00-ff]
[ 0.287374] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.287379] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.287383] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.287388] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.287392] pnp 00:00: [mem 0x000c8000-0x000dffff window]
[ 0.287396] pnp 00:00: [mem 0x7f000000-0xffffffff window]
[ 0.287400] pnp 00:00: [mem 0x00000000 window]
[ 0.287492] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.287555] pnp 00:01: [mem 0xe0000000-0xefffffff]
[ 0.287625] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.287632] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.288385] pnp 00:02: [io 0x040b]
[ 0.288390] pnp 00:02: [io 0x04d6]
[ 0.288393] pnp 00:02: [io 0x0c00-0x0c01]
[ 0.288397] pnp 00:02: [io 0x0c14]
[ 0.288400] pnp 00:02: [io 0x0c50-0x0c51]
[ 0.288404] pnp 00:02: [io 0x0c52]
[ 0.288407] pnp 00:02: [io 0x0c6c]
[ 0.288410] pnp 00:02: [io 0x0c6f]
[ 0.288413] pnp 00:02: [io 0x0cd0-0x0cd1]
[ 0.288417] pnp 00:02: [io 0x0cd2-0x0cd3]
[ 0.288420] pnp 00:02: [io 0x0cd4-0x0cd5]
[ 0.288424] pnp 00:02: [io 0x0cd6-0x0cd7]
[ 0.288427] pnp 00:02: [io 0x0cd8-0x0cdf]
[ 0.288431] pnp 00:02: [io 0x0800-0x089f]
[ 0.288435] pnp 00:02: [io 0x0000-0xffffffff disabled]
[ 0.288438] pnp 00:02: [io 0x0000-0x000f]
[ 0.288442] pnp 00:02: [io 0x0b20-0x0b3f]
[ 0.288445] pnp 00:02: [io 0x0900-0x090f]
[ 0.288449] pnp 00:02: [io 0x0910-0x091f]
[ 0.288452] pnp 00:02: [io 0xfe00-0xfefe]
[ 0.288456] pnp 00:02: [io 0x0060-0x005f disabled]
[ 0.288460] pnp 00:02: [io 0x0064-0x0063 disabled]
[ 0.288463] pnp 00:02: [mem 0xfec00000-0xfec00fff]
[ 0.288467] pnp 00:02: [mem 0xfee00000-0xfee00fff]
[ 0.288471] pnp 00:02: [mem 0xfed80000-0xfed8ffff]
[ 0.288475] pnp 00:02: [mem 0xfed61000-0xfed70fff]
[ 0.288478] pnp 00:02: [mem 0xfec10000-0xfec10fff]
[ 0.288482] pnp 00:02: [mem 0xfed00000-0xfed00fff]
[ 0.288486] pnp 00:02: [mem 0xffc00000-0xffffffff]
[ 0.288589] system 00:02: [io 0x040b] has been reserved
[ 0.288594] system 00:02: [io 0x04d6] has been reserved
[ 0.288599] system 00:02: [io 0x0c00-0x0c01] has been reserved
[ 0.288603] system 00:02: [io 0x0c14] has been reserved
[ 0.288608] system 00:02: [io 0x0c50-0x0c51] has been reserved
[ 0.288612] system 00:02: [io 0x0c52] has been reserved
[ 0.288617] system 00:02: [io 0x0c6c] has been reserved
[ 0.288621] system 00:02: [io 0x0c6f] has been reserved
[ 0.288626] system 00:02: [io 0x0cd0-0x0cd1] has been reserved
[ 0.288630] system 00:02: [io 0x0cd2-0x0cd3] has been reserved
[ 0.288635] system 00:02: [io 0x0cd4-0x0cd5] has been reserved
[ 0.288639] system 00:02: [io 0x0cd6-0x0cd7] has been reserved
[ 0.288644] system 00:02: [io 0x0cd8-0x0cdf] has been reserved
[ 0.288648] system 00:02: [io 0x0800-0x089f] has been reserved
[ 0.288653] system 00:02: [io 0x0b20-0x0b3f] has been reserved
[ 0.288658] system 00:02: [io 0x0900-0x090f] has been reserved
[ 0.288662] system 00:02: [io 0x0910-0x091f] has been reserved
[ 0.288667] system 00:02: [io 0xfe00-0xfefe] has been reserved
[ 0.288673] system 00:02: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.288679] system 00:02: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.288684] system 00:02: [mem 0xfed80000-0xfed8ffff] has been reserved
[ 0.288689] system 00:02: [mem 0xfed61000-0xfed70fff] has been reserved
[ 0.288694] system 00:02: [mem 0xfec10000-0xfec10fff] has been reserved
[ 0.288699] system 00:02: [mem 0xfed00000-0xfed00fff] has been reserved
[ 0.288705] system 00:02: [mem 0xffc00000-0xffffffff] has been reserved
[ 0.288711] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.288934] pnp 00:03: [io 0x0000-0xffffffff disabled]
[ 0.288939] pnp 00:03: [io 0x0300-0x031f]
[ 0.288942] pnp 00:03: [io 0x0290-0x029f]
[ 0.288946] pnp 00:03: [io 0x0230-0x023f]
[ 0.289013] system 00:03: [io 0x0300-0x031f] has been reserved
[ 0.289018] system 00:03: [io 0x0290-0x029f] has been reserved
[ 0.289022] system 00:03: [io 0x0230-0x023f] has been reserved
[ 0.289028] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.289051] pnp 00:04: [dma 4]
[ 0.289055] pnp 00:04: [io 0x0000-0x000f]
[ 0.289059] pnp 00:04: [io 0x0081-0x0083]
[ 0.289062] pnp 00:04: [io 0x0087]
[ 0.289069] pnp 00:04: [io 0x0089-0x008b]
[ 0.289073] pnp 00:04: [io 0x008f]
[ 0.289076] pnp 00:04: [io 0x00c0-0x00df]
[ 0.289113] pnp 00:04: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.289131] pnp 00:05: [io 0x0070-0x0071]
[ 0.289147] pnp 00:05: [irq 8]
[ 0.289184] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.289199] pnp 00:06: [io 0x0061]
[ 0.289236] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.289283] pnp 00:07: [io 0x0010-0x001f]
[ 0.289287] pnp 00:07: [io 0x0022-0x003f]
[ 0.289291] pnp 00:07: [io 0x0044-0x005f]
[ 0.289294] pnp 00:07: [io 0x0072-0x007f]
[ 0.289298] pnp 00:07: [io 0x0080]
[ 0.289301] pnp 00:07: [io 0x0084-0x0086]
[ 0.289304] pnp 00:07: [io 0x0088]
[ 0.289308] pnp 00:07: [io 0x008c-0x008e]
[ 0.289311] pnp 00:07: [io 0x0090-0x009f]
[ 0.289315] pnp 00:07: [io 0x00a2-0x00bf]
[ 0.289318] pnp 00:07: [io 0x00e0-0x00ef]
[ 0.289322] pnp 00:07: [io 0x04d0-0x04d1]
[ 0.289393] system 00:07: [io 0x04d0-0x04d1] has been reserved
[ 0.289399] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.289415] pnp 00:08: [io 0x00f0-0x00ff]
[ 0.289423] pnp 00:08: [irq 13]
[ 0.289462] pnp 00:08: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.289547] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.289788] pnp 00:0a: [io 0x03f8-0x03ff]
[ 0.289797] pnp 00:0a: [irq 4]
[ 0.289801] pnp 00:0a: [dma 0 disabled]
[ 0.289905] pnp 00:0a: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.290108] pnp 00:0b: [mem 0x67000000-0x7effffff]
[ 0.290195] system 00:0b: [mem 0x67000000-0x7effffff] could not be reserved
[ 0.290201] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.290414] pnp 00:0c: [mem 0xfed00000-0xfed003ff]
[ 0.290480] pnp 00:0c: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.290491] pnp: PnP ACPI: found 13 devices
[ 0.290494] ACPI: ACPI bus type pnp unregistered
[ 0.327349] PCI: max bus depth: 1 pci_try_num: 2
[ 0.327415] pci 0000:00:04.0: BAR 8: assigned [mem 0x7f000000-0x7f1fffff]
[ 0.327423] pci 0000:00:04.0: BAR 9: assigned [mem 0x7f200000-0x7f3fffff 64bit pref]
[ 0.327432] pci 0000:00:04.0: BAR 7: assigned [io 0x1000-0x1fff]
[ 0.327437] pci 0000:00:04.0: PCI bridge to [bus 01-01]
[ 0.327443] pci 0000:00:04.0: bridge window [io 0x1000-0x1fff]
[ 0.327450] pci 0000:00:04.0: bridge window [mem 0x7f000000-0x7f1fffff]
[ 0.327457] pci 0000:00:04.0: bridge window [mem 0x7f200000-0x7f3fffff 64bit pref]
[ 0.327465] pci 0000:00:14.4: PCI bridge to [bus 02-02]
[ 0.327469] pci 0000:00:14.4: bridge window [io disabled]
[ 0.327476] pci 0000:00:14.4: bridge window [mem disabled]
[ 0.327483] pci 0000:00:14.4: bridge window [mem pref disabled]
[ 0.327493] pci 0000:00:15.0: PCI bridge to [bus 03-03]
[ 0.327496] pci 0000:00:15.0: bridge window [io disabled]
[ 0.327504] pci 0000:00:15.0: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.327510] pci 0000:00:15.0: bridge window [mem pref disabled]
[ 0.327520] pci 0000:00:15.1: PCI bridge to [bus 04-04]
[ 0.327525] pci 0000:00:15.1: bridge window [io 0xe000-0xefff]
[ 0.327532] pci 0000:00:15.1: bridge window [mem disabled]
[ 0.327539] pci 0000:00:15.1: bridge window [mem 0xd0000000-0xd00fffff 64bit pref]
[ 0.327549] pci 0000:00:15.2: PCI bridge to [bus 05-05]
[ 0.327552] pci 0000:00:15.2: bridge window [io disabled]
[ 0.327560] pci 0000:00:15.2: bridge window [mem 0xfe900000-0xfe9fffff]
[ 0.327566] pci 0000:00:15.2: bridge window [mem pref disabled]
[ 0.327575] pci 0000:00:15.3: PCI bridge to [bus 06-06]
[ 0.327578] pci 0000:00:15.3: bridge window [io disabled]
[ 0.327586] pci 0000:00:15.3: bridge window [mem 0xfe800000-0xfe8fffff]
[ 0.327592] pci 0000:00:15.3: bridge window [mem pref disabled]
[ 0.327619] pci 0000:00:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.327627] pci 0000:00:04.0: setting latency timer to 64
[ 0.327642] pci 0000:00:15.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.327648] pci 0000:00:15.0: setting latency timer to 64
[ 0.327658] pci 0000:00:15.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.327665] pci 0000:00:15.1: setting latency timer to 64
[ 0.327675] pci 0000:00:15.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.327681] pci 0000:00:15.2: setting latency timer to 64
[ 0.327691] pci 0000:00:15.3: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.327697] pci 0000:00:15.3: setting latency timer to 64
[ 0.327704] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.327708] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.327712] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.327717] pci_bus 0000:00: resource 7 [mem 0x7f000000-0xffffffff]
[ 0.327721] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
[ 0.327726] pci_bus 0000:01: resource 1 [mem 0x7f000000-0x7f1fffff]
[ 0.327730] pci_bus 0000:01: resource 2 [mem 0x7f200000-0x7f3fffff 64bit pref]
[ 0.327735] pci_bus 0000:02: resource 4 [io 0x0000-0x0cf7]
[ 0.327739] pci_bus 0000:02: resource 5 [io 0x0d00-0xffff]
[ 0.327743] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.327748] pci_bus 0000:02: resource 7 [mem 0x7f000000-0xffffffff]
[ 0.327752] pci_bus 0000:03: resource 1 [mem 0xfea00000-0xfeafffff]
[ 0.327756] pci_bus 0000:04: resource 0 [io 0xe000-0xefff]
[ 0.327761] pci_bus 0000:04: resource 2 [mem 0xd0000000-0xd00fffff 64bit pref]
[ 0.327765] pci_bus 0000:05: resource 1 [mem 0xfe900000-0xfe9fffff]
[ 0.327770] pci_bus 0000:06: resource 1 [mem 0xfe800000-0xfe8fffff]
[ 0.327843] NET: Registered protocol family 2
[ 0.327946] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.328272] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.328868] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.329172] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.329177] TCP reno registered
[ 0.329186] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.329203] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.329420] NET: Registered protocol family 1
[ 0.329821] RPC: Registered named UNIX socket transport module.
[ 0.329829] RPC: Registered udp transport module.
[ 0.329832] RPC: Registered tcp transport module.
[ 0.329835] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.329855] pci 0000:00:01.0: Boot video device
[ 1.170365] PCI: CLS 64 bytes, default 64
[ 1.181513] highmem bounce pool size: 64 pages
[ 1.193989] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 1.194726] fuse init (API version 7.16)
[ 1.194865] msgmni has been set to 1729
[ 1.196177] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.196184] io scheduler noop registered
[ 1.196209] io scheduler cfq registered (default)
[ 1.196944] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 1.196955] ACPI: Power Button [PWRB]
[ 1.197052] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 1.197058] ACPI: Power Button [PWRF]
[ 1.197328] ACPI: acpi_idle registered with cpuidle
[ 1.199633] Linux agpgart interface v0.103
[ 1.201563] brd: module loaded
[ 1.202544] loop: module loaded
[ 1.202654] ahci 0000:00:11.0: version 3.0
[ 1.202681] ahci 0000:00:11.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 1.202861] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
[ 1.202869] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
[ 1.204609] scsi0 : ahci
[ 1.204968] scsi1 : ahci
[ 1.205292] scsi2 : ahci
[ 1.205573] scsi3 : ahci
[ 1.205794] scsi4 : ahci
[ 1.205976] scsi5 : ahci
[ 1.206098] ata1: SATA max UDMA/133 abar m1024@0xfeb4b000 port 0xfeb4b100 irq 19
[ 1.206104] ata2: SATA max UDMA/133 abar m1024@0xfeb4b000 port 0xfeb4b180 irq 19
[ 1.206110] ata3: SATA max UDMA/133 abar m1024@0xfeb4b000 port 0xfeb4b200 irq 19
[ 1.206116] ata4: SATA max UDMA/133 abar m1024@0xfeb4b000 port 0xfeb4b280 irq 19
[ 1.206121] ata5: SATA max UDMA/133 abar m1024@0xfeb4b000 port 0xfeb4b300 irq 19
[ 1.206127] ata6: SATA max UDMA/133 abar m1024@0xfeb4b000 port 0xfeb4b380 irq 19
[ 1.206384] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.206431] r8169 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 1.206486] r8169 0000:04:00.0: setting latency timer to 64
[ 1.206556] r8169 0000:04:00.0: irq 40 for MSI/MSI-X
[ 1.206916] r8169 0000:04:00.0: eth0: RTL8168e/8111e at 0xf802c000, 14:da:e9:67:fd:0a, XID 0c200000 IRQ 40
[ 1.206975] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.206996] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.207015] ehci_hcd 0000:00:12.2: EHCI Host Controller
[ 1.207028] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 1.207042] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.207074] QUIRK: Enable AMD PLL fix
[ 1.207092] ehci_hcd 0000:00:12.2: debug port 1
[ 1.207257] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfeb49000
[ 1.216906] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 1.217204] hub 1-0:1.0: USB hub found
[ 1.217213] hub 1-0:1.0: 5 ports detected
[ 1.217335] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.217365] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 1.217375] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 1.217388] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.217423] ehci_hcd 0000:00:13.2: debug port 1
[ 1.217682] ehci_hcd 0000:00:13.2: irq 17, io mem 0xfeb47000
[ 1.226900] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 1.227202] hub 2-0:1.0: USB hub found
[ 1.227211] hub 2-0:1.0: 5 ports detected
[ 1.227331] ehci_hcd 0000:00:16.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 1.227364] ehci_hcd 0000:00:16.2: EHCI Host Controller
[ 1.227375] ehci_hcd 0000:00:16.2: new USB bus registered, assigned bus number 3
[ 1.227388] ehci_hcd 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.227422] ehci_hcd 0000:00:16.2: debug port 1
[ 1.227685] ehci_hcd 0000:00:16.2: irq 17, io mem 0xfeb44000
[ 1.236919] ehci_hcd 0000:00:16.2: USB 2.0 started, EHCI 1.00
[ 1.237239] hub 3-0:1.0: USB hub found
[ 1.237249] hub 3-0:1.0: 4 ports detected
[ 1.237370] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.237406] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.237437] ohci_hcd 0000:00:12.0: OHCI Host Controller
[ 1.237448] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 4
[ 1.237708] ohci_hcd 0000:00:12.0: irq 18, io mem 0xfeb4a000
[ 1.294539] hub 4-0:1.0: USB hub found
[ 1.294553] hub 4-0:1.0: 5 ports detected
[ 1.294671] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.294705] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 1.294715] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
[ 1.294954] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfeb48000
[ 1.351141] hub 5-0:1.0: USB hub found
[ 1.351155] hub 5-0:1.0: 5 ports detected
[ 1.351271] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.351305] ohci_hcd 0000:00:14.5: OHCI Host Controller
[ 1.351316] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 6
[ 1.351560] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfeb46000
[ 1.407846] hub 6-0:1.0: USB hub found
[ 1.407859] hub 6-0:1.0: 2 ports detected
[ 1.407970] ohci_hcd 0000:00:16.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.408002] ohci_hcd 0000:00:16.0: OHCI Host Controller
[ 1.408013] ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 7
[ 1.408255] ohci_hcd 0000:00:16.0: irq 18, io mem 0xfeb45000
[ 1.464477] hub 7-0:1.0: USB hub found
[ 1.464491] hub 7-0:1.0: 4 ports detected
[ 1.464635] xhci_hcd 0000:05:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.464668] xhci_hcd 0000:05:00.0: setting latency timer to 64
[ 1.464675] xhci_hcd 0000:05:00.0: xHCI Host Controller
[ 1.464688] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 8
[ 1.465065] xhci_hcd 0000:05:00.0: irq 18, io mem 0xfe900000
[ 1.465230] xhci_hcd 0000:05:00.0: irq 41 for MSI/MSI-X
[ 1.465239] xhci_hcd 0000:05:00.0: irq 42 for MSI/MSI-X
[ 1.465245] xhci_hcd 0000:05:00.0: irq 43 for MSI/MSI-X
[ 1.466078] xHCI xhci_add_endpoint called for root hub
[ 1.466085] xHCI xhci_check_bandwidth called for root hub
[ 1.466132] hub 8-0:1.0: USB hub found
[ 1.466145] hub 8-0:1.0: 2 ports detected
[ 1.466241] xhci_hcd 0000:05:00.0: xHCI Host Controller
[ 1.466250] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 9
[ 1.468285] xHCI xhci_add_endpoint called for root hub
[ 1.468289] xHCI xhci_check_bandwidth called for root hub
[ 1.468328] hub 9-0:1.0: USB hub found
[ 1.468341] hub 9-0:1.0: 2 ports detected
[ 1.468429] xhci_hcd 0000:06:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 1.468462] xhci_hcd 0000:06:00.0: setting latency timer to 64
[ 1.468468] xhci_hcd 0000:06:00.0: xHCI Host Controller
[ 1.468477] xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 10
[ 1.468855] xhci_hcd 0000:06:00.0: irq 19, io mem 0xfe800000
[ 1.469015] xhci_hcd 0000:06:00.0: irq 44 for MSI/MSI-X
[ 1.469024] xhci_hcd 0000:06:00.0: irq 45 for MSI/MSI-X
[ 1.469030] xhci_hcd 0000:06:00.0: irq 46 for MSI/MSI-X
[ 1.469894] xHCI xhci_add_endpoint called for root hub
[ 1.469901] xHCI xhci_check_bandwidth called for root hub
[ 1.469954] hub 10-0:1.0: USB hub found
[ 1.469967] hub 10-0:1.0: 2 ports detected
[ 1.470111] xhci_hcd 0000:06:00.0: xHCI Host Controller
[ 1.470124] xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 11
[ 1.472074] xHCI xhci_add_endpoint called for root hub
[ 1.472078] xHCI xhci_check_bandwidth called for root hub
[ 1.472118] hub 11-0:1.0: USB hub found
[ 1.472130] hub 11-0:1.0: 2 ports detected
[ 1.472224] Initializing USB Mass Storage driver...
[ 1.472308] usbcore: registered new interface driver usb-storage
[ 1.472312] USB Mass Storage support registered.
[ 1.472389] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 1.473519] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.473606] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.473738] mousedev: PS/2 mouse device common for all mice
[ 1.474150] rtc_cmos 00:05: RTC can wake from S4
[ 1.474273] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 1.474526] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.474562] i2c /dev entries driver
[ 1.474627] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 1.474779] lirc_dev: IR Remote Control driver registered, major 252
[ 1.474783] IR NEC protocol handler initialized
[ 1.474787] IR RC5(x) protocol handler initialized
[ 1.474790] IR RC6 protocol handler initialized
[ 1.474793] IR JVC protocol handler initialized
[ 1.474796] IR Sony protocol handler initialized
[ 1.474799] IR RC5 (streamzap) protocol handler initialized
[ 1.474802] Linux video capture interface: v2.00
[ 1.475005] cpuidle: using governor ladder
[ 1.475183] usbcore: registered new interface driver usbhid
[ 1.475187] usbhid: USB HID core driver
[ 1.475190] ALSA device list:
[ 1.475192] No soundcards found.
[ 1.475196] Netfilter messages via NETLINK v0.30.
[ 1.475536] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 1.475572] TCP cubic registered
[ 1.475836] NET: Registered protocol family 10
[ 1.476934] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 1.476962] NET: Registered protocol family 17
[ 1.476979] lib80211: common routines for IEEE802.11 drivers
[ 1.476983] lib80211_crypt: registered algorithm 'NULL'
[ 1.476987] Registering the dns_resolver key type
[ 1.477015] Using IPI No-Shortcut mode
[ 1.482622] rtc_cmos 00:05: setting system clock to 2011-08-24 21:12:38 UTC (1314220358)
[ 1.482640] powernow-k8: Found 1 AMD E-350 Processor (2 cpu cores) (version 2.20.00)
[ 1.482700] powernow-k8: 0 : pstate 0 (1600 MHz)
[ 1.482704] powernow-k8: 1 : pstate 1 (1280 MHz)
[ 1.482707] powernow-k8: 2 : pstate 2 (800 MHz)
[ 1.523599] ata1: SATA link down (SStatus 0 SControl 300)
[ 1.526921] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.526981] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.527021] ata6: SATA link down (SStatus 0 SControl 300)
[ 1.527057] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.690269] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.707735] ata2.00: ATAPI: TSSTcorp CDDVDW SN-T083C, SB00, max UDMA/100
[ 1.707752] ata2.00: applying bridge limits
[ 1.726501] ata2.00: configured for UDMA/100
[ 1.732545] scsi 1:0:0:0: CD-ROM TSSTcorp CDDVDW SN-T083C SB00 PQ: 0 ANSI: 5
[ 1.739961] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.739976] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.740348] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.740538] sr 1:0:0:0: Attached scsi generic sg0 type 5
[ 1.741119] Freeing unused kernel memory: 4096k freed
[ 1.826919] usb 4-3: new low speed USB device number 2 using ohci_hcd
[ 1.993124] input: Lenovo Mini Wireless Keyboard as /devices/pci0000:00/0000:00:12.0/usb4/4-3/4-3:1.0/input/input2
[ 1.993447] generic-usb 0003:17EF:6014.0001: input,hidraw0: USB HID v1.11 Keyboard [Lenovo Mini Wireless Keyboard] on usb-0000:00:12.0-3/input0
[ 2.004485] input: Lenovo Mini Wireless Keyboard as /devices/pci0000:00/0000:00:12.0/usb4/4-3/4-3:1.1/input/input3
[ 2.004914] generic-usb 0003:17EF:6014.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Lenovo Mini Wireless Keyboard] on usb-0000:00:12.0-3/input1
[ 2.176906] Refined TSC clocksource calibration: 1599.934 MHz.
[ 2.176925] Switching to clocksource tsc
[ 2.253579] usb 4-5: new full speed USB device number 3 using ohci_hcd
[ 2.386910] usb 4-5: device descriptor read/64, error -62
[ 2.623577] usb 4-5: device descriptor read/64, error -62
[ 2.856928] usb 4-5: new full speed USB device number 4 using ohci_hcd
[ 2.990244] usb 4-5: device descriptor read/64, error -62
[ 3.226911] usb 4-5: device descriptor read/64, error -62
[ 3.460245] usb 4-5: new full speed USB device number 5 using ohci_hcd
[ 3.866895] usb 4-5: device not accepting address 5, error -62
[ 3.996911] usb 4-5: new full speed USB device number 6 using ohci_hcd
[ 4.403566] usb 4-5: device not accepting address 6, error -62
[ 4.403607] hub 4-0:1.0: unable to enumerate USB device on port 5
[ 4.510250] usb 2-5: new high speed USB device number 2 using ehci_hcd
[ 4.638307] scsi6 : usb-storage 2-5:1.0
[ 4.993592] usb 7-3: new full speed USB device number 2 using ohci_hcd
[ 5.767281] scsi 6:0:0:0: Direct-Access Multiple Card Reader 1.00 PQ: 0 ANSI: 0
[ 5.771024] sd 6:0:0:0: Attached scsi generic sg1 type 0
[ 6.853916] sd 6:0:0:0: [sda] 30916608 512-byte logical blocks: (15.8 GB/14.7 GiB)
[ 6.854926] sd 6:0:0:0: [sda] Write Protect is off
[ 6.854943] sd 6:0:0:0: [sda] Mode Sense: 03 00 00 00
[ 6.855816] sd 6:0:0:0: [sda] No Caching mode page present
[ 6.855831] sd 6:0:0:0: [sda] Assuming drive cache: write through
[ 6.861054] sd 6:0:0:0: [sda] No Caching mode page present
[ 6.861067] sd 6:0:0:0: [sda] Assuming drive cache: write through
[ 6.862727] sda: sda1 sda2
[ 6.867047] sd 6:0:0:0: [sda] No Caching mode page present
[ 6.867062] sd 6:0:0:0: [sda] Assuming drive cache: write through
[ 6.867073] sd 6:0:0:0: [sda] Attached SCSI removable disk
[ 7.049628] EXT4-fs (sda1): couldn't mount as ext3 due to feature incompatibilities
[ 7.067394] EXT4-fs (sda1): couldn't mount as ext2 due to feature incompatibilities
[ 7.093034] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 7.192433] EXT4-fs (sda2): couldn't mount as ext3 due to feature incompatibilities
[ 7.207982] EXT4-fs (sda2): couldn't mount as ext2 due to feature incompatibilities
[ 13.983334] EXT4-fs (sda2): recovery complete
[ 13.989329] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
>[ 14.661099] udevd[191]: starting version 173
[ 14.970521] wmi: Mapper loaded
[ 15.346585] HDA Intel 0000:00:01.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 15.346659] HDA Intel 0000:00:01.1: irq 47 for MSI/MSI-X
[ 15.346949] HDA Intel 0000:00:01.1: setting latency timer to 64
[ 15.368966] Bluetooth: Atheros AR30xx firmware driver ver 1.0
[ 15.401572] HDMI status: Pin=3 Presence_Detect=0 ELD_Valid=0
[ 15.408086] input: HD-Audio Generic HDMI/DP as /devices/pci0000:00/0000:00:01.1/sound/card0/input4
[ 15.566802] ath9k 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 15.566821] ath9k 0000:03:00.0: setting latency timer to 64
[ 15.664903] ath: EEPROM regdomain: 0x60
[ 15.664909] ath: EEPROM indicates we should expect a direct regpair map
[ 15.664915] ath: Country alpha2 being used: 00
[ 15.664919] ath: Regpair used: 0x60
[ 15.699025] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 15.699035] Disabling lock debugging due to kernel taint
[ 15.705808] [fglrx] Maximum main memory to use for locked dma buffers: 1515 MBytes.
[ 15.705898] [fglrx] vendor: 1002 device: 9802 count: 1
[ 15.706848] [fglrx] ioport: bar 1, base 0xf000, size: 0x100
[ 15.706869] pci 0000:00:01.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 15.706878] pci 0000:00:01.0: setting latency timer to 64
[ 15.707738] [fglrx] Kernel PAT support is enabled
[ 15.707776] [fglrx] module loaded - fglrx 8.88.7 [Jul 28 2011] with 1 minors
[ 15.713904] r8169 0000:04:00.0: eth0: link down
[ 15.713921] r8169 0000:04:00.0: eth0: link down
[ 15.714176] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 15.714250] ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control'
[ 15.715513] Registered led device: ath9k-phy0
[ 15.716124] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xf88e0000, irq=16
[ 15.863149] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 15.872707] usb 7-3: USB disconnect, device number 2
[ 15.873922] usbcore: registered new interface driver ath3k
[ 17.250108] usb 7-3: new full speed USB device number 3 using ohci_hcd
[ 17.456264] Bluetooth: Core ver 2.16
[ 17.456749] NET: Registered protocol family 31
[ 17.456754] Bluetooth: HCI device and connection manager initialized
[ 17.456760] Bluetooth: HCI socket layer initialized
[ 17.456764] Bluetooth: L2CAP socket layer initialized
[ 17.460028] Bluetooth: SCO socket layer initialized
[ 17.471261] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 17.473031] usbcore: registered new interface driver btusb
[ 18.246367] r8169 0000:04:00.0: eth0: link up
[ 18.246593] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 18.547140] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 18.547146] Bluetooth: BNEP filters: protocol multicast
[ 18.957333] fglrx_pci 0000:00:01.0: irq 48 for MSI/MSI-X
[ 18.958297] [fglrx] Firegl kernel thread PID: 848
[ 18.958382] [fglrx] Firegl kernel thread PID: 849
[ 18.958467] [fglrx] Firegl kernel thread PID: 850
[ 18.958730] [fglrx] IRQ 48 Enabled
[ 19.365037] [fglrx] Gart USWC size:508 M.
[ 19.365045] [fglrx] Gart cacheable size:199 M.
[ 19.365056] [fglrx] Reserved FB block: Shared offset:0, size:1000000
[ 19.365061] [fglrx] Reserved FB block: Unshared offset:fe67000, size:199000
[ 19.365067] [fglrx] Reserved FB block: Unshared offset:17ff4000, size:c000
[ 19.610073] hci_cmd_timer: hci0 command tx timeout
[ 20.636880] hci_cmd_timer: hci0 command tx timeout
[ 21.640211] hci_cmd_timer: hci0 command tx timeout
[ 24.320557] EXT4-fs (sda1): re-mounted. Opts: barrier=1,data=ordered,commit=0
[ 26.180774] EXT4-fs (sda2): re-mounted. Opts: barrier=1,data=ordered,commit=0
[ 576.090408] HDMI hot plug event: Pin=3 Presence_Detect=1 ELD_Valid=0
[ 576.090442] HDMI status: Pin=3 Presence_Detect=1 ELD_Valid=1
[ 576.091941] HDMI hot plug event: Pin=3 Presence_Detect=0 ELD_Valid=1
[ 576.091962] HDMI status: Pin=3 Presence_Detect=1 ELD_Valid=1
[ 616.586852] usb 4-5: new full speed USB device number 7 using ohci_hcd
[ 616.791166] Registered IR keymap rc-rc6-mce
[ 616.791558] input: Media Center Ed. eHome Infrared Remote Transceiver (0471:060c) as /devices/pci0000:00/0000:00:12.0/usb4/4-5/4-5:1.0/rc/rc0/input5
[ 616.791739] rc0: Media Center Ed. eHome Infrared Remote Transceiver (0471:060c) as /devices/pci0000:00/0000:00:12.0/usb4/4-5/4-5:1.0/rc/rc0
[ 616.792009] mceusb 4-5:1.0: Registered BB+ Dongle(e.d) on usb4:7
[ 616.792079] usbcore: registered new interface driver mceusb
[ 635.934995] HDMI hot plug event: Pin=3 Presence_Detect=0 ELD_Valid=0
[ 635.935029] HDMI status: Pin=3 Presence_Detect=0 ELD_Valid=0
[ 635.971882] HDMI hot plug event: Pin=3 Presence_Detect=1 ELD_Valid=1
[ 635.971929] HDMI status: Pin=3 Presence_Detect=0 ELD_Valid=0
root /var/log #
');


Re: Remote receiver does not work on boot - therio - 08-24-2011

Ok, in the first log, the remote is found:
[ 1.474779] lirc_dev: IR Remote Control driver registered, major 252

But OpenELEC doesn't do anything with it, like it shows in the second log:
[ 616.791166] Registered IR keymap rc-rc6-mce
[ 616.791558] input: Media Center Ed. eHome Infrared Remote Transceiver

Will ask the dev what this could mean


Re: Remote receiver does not work on boot - reynard80 - 08-30-2011

Sorry to bump, but do you have any idea?


Re: Remote receiver does not work on boot - krul - 11-26-2011

I have exactly the same problem, using OpenElec 1.02.

Did you found a resolution already?


Re: Remote receiver does not work on boot - jfath - 12-17-2011

Add me to the list of people with this problem as well. Same Philips 0471:060c receiver.

Also, If I use a MS receiver with ID 045e:006d on the same machine, it works fine on boot.');


Re: Remote receiver does not work on boot - Nemobil - 04-11-2012

Hi.

I have exactly the same (very annoying) issue on my ASUS E35M1-M hardware with Lenovo remote control and receiver (= Microsoft MCE) (currently running Fusion.x86_64-devel-20120402145419-r10416, but also on latest beta 1 (v1.95.1)).

Is there any progress concerning this issue? Has anybody been able to solve this?

Best regards,
Nemobil


Re: Remote receiver does not work on boot - krul - 04-12-2012

I 'solved' it by using a different bluetooth dongle :dry: