OpenELEC Forum
exFAT HDDs not mounted but recognized - Printable Version

+- OpenELEC Forum (https://forum.openelec.tv)
+-- Forum: Generic Forum (https://forum.openelec.tv/forumdisplay.php?fid=5)
+--- Forum: STORAGE (https://forum.openelec.tv/forumdisplay.php?fid=60)
+--- Thread: exFAT HDDs not mounted but recognized (/showthread.php?tid=53935)



exFAT HDDs not mounted but recognized - toadle - 11-15-2012

Hey guys,

I'm working on my newly installed OpenElec 2.0 on a Zotac AD10. Currently I'm trying to find a correct formatting for my external USB-drives that either my Macs and OpenElec hat read and write.

Since HFS+ does not seem to work (OpenElec can not write), I changed to exFat.
But now I'm having mount problems. OpenElec does not mount my HDDs.

I'm testing this with:
One 16GB SanDisk Cruzer (exFat)
One 750GB Toshiba USB3.0 HDD
One 500GB Western Digital USB2.0 HDD

The SanDisk Cruzer gets recognized. But mounting takes around 3 minutes. Here is the log:
Code:
Nov 15 16:36:27 openelec user.info kernel: [ 385.540288] usb 8-2: new high-speed USB device number 3 using xhci_hcd
Nov 15 16:36:27 openelec user.warn kernel: [ 385.556582] xhci_hcd 0000:01:00.0: WARN: short transfer on control ep
Nov 15 16:36:27 openelec user.warn kernel: [ 385.556873] xhci_hcd 0000:01:00.0: WARN: short transfer on control ep
Nov 15 16:36:27 openelec user.warn kernel: [ 385.557295] xhci_hcd 0000:01:00.0: WARN: short transfer on control ep
Nov 15 16:36:27 openelec user.warn kernel: [ 385.557711] xhci_hcd 0000:01:00.0: WARN: short transfer on control ep
Nov 15 16:36:27 openelec user.warn kernel: [ 385.558199] usb 8-2: ep 0x81 - rounding interval to 32768 microframes, ep desc says 0 microframes
Nov 15 16:36:27 openelec user.warn kernel: [ 385.558220] usb 8-2: ep 0x2 - rounding interval to 32768 microframes, ep desc says 0 microframes
Nov 15 16:36:27 openelec user.info kernel: [ 385.560794] scsi5 : usb-storage 8-2:1.0
Nov 15 16:36:28 openelec user.notice kernel: [ 386.564818] scsi 5:0:0:0: Direct-Access SanDisk U3 Cruzer Micro 8.02 PQ: 0 ANSI: 0 CCS
Nov 15 16:36:28 openelec user.notice kernel: [ 386.574195] sd 5:0:0:0: [sdb] Attached SCSI removable disk
Nov 15 16:36:28 openelec user.notice kernel: [ 386.576843] sd 5:0:0:0: Attached scsi generic sg1 type 0
Nov 15 16:36:28 openelec user.notice kernel: [ 387.195796] sd 5:0:0:0: [sdb] 31301631 512-byte logical blocks: (16.0 GB/14.9 GiB)
Nov 15 16:36:28 openelec user.err kernel: [ 387.196542] sd 5:0:0:0: [sdb] No Caching mode page present
Nov 15 16:36:28 openelec user.err kernel: [ 387.196551] sd 5:0:0:0: [sdb] Assuming drive cache: write through
Nov 15 16:36:28 openelec user.err kernel: [ 387.197620] sd 5:0:0:0: [sdb] No Caching mode page present
Nov 15 16:36:28 openelec user.err kernel: [ 387.197628] sd 5:0:0:0: [sdb] Assuming drive cache: write through
Nov 15 16:36:28 openelec user.info kernel: [ 387.211786] sdb: sdb1 sdb2
Nov 15 16:37:15 openelec daemon.err smbd[1618]: [2012/11/15 16:37:15.644423, 0] smbd/dfree.c:156(sys_disk_free)
Nov 15 16:37:15 openelec daemon.err smbd[1618]: WARNING: dfree is broken on this system
Nov 15 16:38:34 openelec user.warn mount.exfat: volume was not unmounted cleanly

The Western Digital drive also gets recognized, but never mounted.
Code:
Nov 15 16:40:10 openelec user.info kernel: [ 608.695380] usb 8-2: USB disconnect, device number 3
Nov 15 16:40:10 openelec user.crit mount.exfat: failed to write 512 bytes to file at 0
Nov 15 16:40:29 openelec user.info kernel: [ 627.870300] usb 8-2: new high-speed USB device number 4 using xhci_hcd
Nov 15 16:40:29 openelec user.warn kernel: [ 627.885704] xhci_hcd 0000:01:00.0: WARN: short transfer on control ep
Nov 15 16:40:29 openelec user.warn kernel: [ 627.886066] xhci_hcd 0000:01:00.0: WARN: short transfer on control ep
Nov 15 16:40:29 openelec user.warn kernel: [ 627.886440] xhci_hcd 0000:01:00.0: WARN: short transfer on control ep
Nov 15 16:40:29 openelec user.warn kernel: [ 627.886891] xhci_hcd 0000:01:00.0: WARN: short transfer on control ep
Nov 15 16:40:29 openelec user.warn kernel: [ 627.887391] usb 8-2: ep 0x81 - rounding interval to 32768 microframes, ep desc says 0 microframes
Nov 15 16:40:29 openelec user.warn kernel: [ 627.887402] usb 8-2: ep 0x2 - rounding interval to 32768 microframes, ep desc says 0 microframes
Nov 15 16:40:29 openelec user.info kernel: [ 627.888376] usb-storage 8-2:1.0: Quirks match for vid 1058 pid 0704: 8000
Nov 15 16:40:29 openelec user.info kernel: [ 627.888408] scsi6 : usb-storage 8-2:1.0
Nov 15 16:40:30 openelec user.notice kernel: [ 628.892669] scsi 6:0:0:0: Direct-Access WD 5000BEV External 1.75 PQ: 0 ANSI: 4
Nov 15 16:40:30 openelec user.notice kernel: [ 628.901917] sd 6:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
Nov 15 16:40:30 openelec user.notice kernel: [ 628.902057] sd 6:0:0:0: Attached scsi generic sg1 type 0
Nov 15 16:40:30 openelec user.notice kernel: [ 628.902235] sd 6:0:0:0: [sdb] Write Protect is off
Nov 15 16:40:30 openelec user.debug kernel: [ 628.902246] sd 6:0:0:0: [sdb] Mode Sense: 23 00 00 00
Nov 15 16:40:30 openelec user.err kernel: [ 628.902516] sd 6:0:0:0: [sdb] No Caching mode page present
Nov 15 16:40:30 openelec user.err kernel: [ 628.902526] sd 6:0:0:0: [sdb] Assuming drive cache: write through
Nov 15 16:40:30 openelec user.err kernel: [ 628.904366] sd 6:0:0:0: [sdb] No Caching mode page present
Nov 15 16:40:30 openelec user.err kernel: [ 628.904376] sd 6:0:0:0: [sdb] Assuming drive cache: write through
Nov 15 16:40:30 openelec user.info kernel: [ 628.935325] sdb: sdb1
Nov 15 16:40:30 openelec user.err kernel: [ 628.938810] sd 6:0:0:0: [sdb] No Caching mode page present
Nov 15 16:40:30 openelec user.err kernel: [ 628.938829] sd 6:0:0:0: [sdb] Assuming drive cache: write through
Nov 15 16:40:30 openelec user.notice kernel: [ 628.938840] sd 6:0:0:0: [sdb] Attached SCSI disk

The Toshiba drive shows the same behaviour, when plugged into USB2.0 ports. On USB3.0 ports it is not even powered.

Does anybody know why this could be?


Re: exFAT HDDs not mounted but recognized - toadle - 11-17-2012

I solved this by reformatting all disks to EXT3. The USB3.0-drive still does not get powered however.