OpenELEC Forum
zotac id80 and ad04 and bluetooth - Printable Version

+- OpenELEC Forum (https://forum.openelec.tv)
+-- Forum: Generic Forum (https://forum.openelec.tv/forumdisplay.php?fid=5)
+--- Forum: INSTALLATION (https://forum.openelec.tv/forumdisplay.php?fid=6)
+---- Forum: Update OpenELEC (https://forum.openelec.tv/forumdisplay.php?fid=7)
+---- Thread: zotac id80 and ad04 and bluetooth (/showthread.php?tid=62507)



zotac id80 and ad04 and bluetooth - mikeybs - 02-14-2013

I am trying to get a wiimote to pair with my zotac id80 openelec box. I installed the xbmc-wiimote openelec add on, and then attempted to pair my wiimote, but it did not work. The lights flashed for about 20 seconds after holding 1&2 on the wiimote, then they turned off.

I haven't found much troubleshooting info for the openelec xbmc-wiimote add on.

I know the id80 is supposed to have built in bluetooth. Some command output:
root ~ # ps aux|grep blue
305 root 0:00 /usr/lib/bluetooth/bluetoothd
2385 root 0:00 grep blue


I'm not sure if that means the bluetooth device has been detected. I believe it is an internal USB device
Bus 003 Device 006: ID 0471:20cc Philips (or NXP)

but I am not sure.

I also have a zotac ad04 that is displaying the exact same behavior. It also is supposed to have internal bluetooth. For this one though, I see the device in the lspci output, which is different from the id80
root ~ #lspci
...
04:00.1 Bluetooth: Ralink corp. Device 3298

this returns the same result on the ad04 as the id80
root ~ # ps aux|grep blue
286 root 0:00 /usr/lib/bluetooth/bluetoothd
11121 root 0:00 grep blue



So can anyone help me track down what is going wrong? The only thing left I can think of trying is to use the 32 bit version of openelec instead of the 64 bit version. Is there any chance this would solve the problem?


zotac id80 and ad04 and bluetooth - mikeybs - 02-20-2013

just some additional info...

root ~ # dmesg|grep -i blue
[ 0.365238] Bluetooth: Core ver 2.16
[ 0.365255] Bluetooth: HCI device and connection manager initialized
[ 0.365261] Bluetooth: HCI socket layer initialized
[ 0.365265] Bluetooth: L2CAP socket layer initialized
[ 0.365270] Bluetooth: SCO socket layer initialized
[ 1.048578] Bluetooth: RFCOMM TTY layer initialized
[ 1.048602] Bluetooth: RFCOMM socket layer initialized
[ 1.048606] Bluetooth: RFCOMM ver 1.11
[ 1.048610] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 1.048613] Bluetooth: BNEP filters: protocol multicast
[ 1.048617] Bluetooth: BNEP socket layer initialized
[ 1.048621] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 1.048626] Bluetooth: HIDP socket layer initialized



nothing listed for devices...
root ~ # hcitool dev
Devices:


zotac id80 and ad04 and bluetooth - mikeybs - 02-27-2013

updated to rc3 and it works