OpenELEC Forum
[3.1.1] Slow IO - Printable Version

+- OpenELEC Forum (https://forum.openelec.tv)
+-- Forum: Generic Forum (https://forum.openelec.tv/forumdisplay.php?fid=5)
+--- Forum: STORAGE (https://forum.openelec.tv/forumdisplay.php?fid=60)
+--- Thread: [3.1.1] Slow IO (/showthread.php?tid=65273)



[3.1.1] Slow IO - lostiniceland - 07-01-2013

Hello everyone,

after I got myself a Richland APU (A10-6500) and tried the stable-release with no success I gave the latest testing a try and the system boots as expected (stable freezes on splash-screen).

Anyhow, after I setup my folders for everything OE is trying to add it to the database which is horrible slow. Metadata should not be downloaded since my files already provide them. Furthermore the UI is on pause for several seconds after particular actions while performing background-tasks (like updating the DB).

I attached some files though I dont know how to interpret the results. The disk of interest should be sdb which only has one partition
EDIT: Since I cannot attach files because it claims the wrong mime-type I add the ouput at the end.

Any help is appreciated
Marc

Code:
OpenELEC:~ # df -h
Filesystem Size Used Available Use% Mounted on
devtmpfs 1.6G 163.8M 1.5G 10% /dev
/dev/sdc1 230.4M 170.9M 59.4M 74% /flash
/dev/sdc2 7.1G 63.3M 7.0G 1% /storage
/dev/loop0 163.5M 163.5M 0 100% /
tmpfs 668.7M 0 668.7M 0% /dev/shm
tmpfs 10.0M 764.0K 9.3M 7% /var
/dev/sda2 2.7T 851.1G 1.9T 30% /var/media/DATEN
/dev/sdb1 139.3M 39.3M 92.6M 30% /var/media/ba1d18d2-d2d3-489b-aab8-59085ff23750
/dev/sdb2 15.5G 13.6G 1.3G 91% /var/media/a9179013-b4db-47c6-b641-647749ec0db5
/dev/sdb3 40.0G 13.3G 24.8G 35% /var/media/7a7669e1-1bc3-49ff-8a09-339f4826a7a4

Code:
OpenELEC:~ # iostat
Linux 3.9.8 (OpenELEC) 07/01/13 _x86_64_ (4 CPU)

avg-cpu: %user %nice %system %iowait %steal %idle
2.59 0.06 0.89 17.91 0.00 78.54

Device: tps Blk_read/s Blk_wrtn/s Blk_read Blk_wrtn
sda 0.71 70.79 0.01 269880 48
sdb 0.37 5.49 0.00 20924 2
sdb1 0.08 1.11 0.00 4236 2
sdb2 0.09 1.22 0.00 4656 0
sdb3 0.08 1.21 0.00 4600 0
sdb4 0.07 1.09 0.00 4160 0
sdc 3.77 104.17 64.44 397118 245648
sdc1 0.70 88.24 0.00 336392 0
sdc2 3.05 15.56 64.44 59326 245648

Code:
OpenELEC:~ # lsmod
Module Size Used by
iptable_nat 2049 0
nf_conntrack_ipv4 6200 1
nf_defrag_ipv4 1083 1 nf_conntrack_ipv4
nf_nat_ipv4 2787 1 iptable_nat
nf_nat 9895 2 nf_nat_ipv4,iptable_nat
iptable_filter 1088 0
ip_tables 13141 2 iptable_filter,iptable_nat
fglrx 6567466 60
ath9k 70284 0
mac80211 201101 1 ath9k
snd_hda_codec_realtek 26574 1
ath9k_common 1696 1 ath9k
ath9k_hw 337790 2 ath9k_common,ath9k
ath 13425 3 ath9k_common,ath9k,ath9k_hw
cfg80211 151909 3 ath,ath9k,mac80211
snd_hda_codec_hdmi 24696 1
rfkill 8815 3 cfg80211
k10temp 2680 0
snd_hda_intel 27417 0
snd_hda_codec 105166 3 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_intel
snd_hwdep 4917 1 snd_hda_codec
snd_pcm 56197 3 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel
snd_page_alloc 6002 2 snd_pcm,snd_hda_intel
wmi 7147 0
xhci_hcd 69688 0
uvesafb 18747 1

Code:
OpenELEC:~ # dmesg
[ 0.000000] Linux version 3.9.8 (stephan@linux-2.fritz.box) (gcc version 4.7.3 (GCC) ) #1 SMP Sun Jun 30 13:28:41 CEST 2013
[ 0.000000] Command line: BOOT_IMAGE=/KERNEL boot=LABEL=System disk=LABEL=Storage ssh quiet
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000ada9ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000adaa0000-0x00000000add83fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000add84000-0x00000000add93fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000add94000-0x00000000ae0f4fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000ae0f5000-0x00000000ae67bfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ae67c000-0x00000000ae67cfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000ae67d000-0x00000000ae882fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000ae883000-0x00000000aec9afff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000aec9b000-0x00000000aeff3fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000aeff4000-0x00000000aeffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100001000-0x000000012effffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: System manufacturer System Product Name/F2A85-V, BIOS 5023 10/29/2012
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x12f000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF write-through
[ 0.000000] C0000-D0FFF write-protect
[ 0.000000] D1000-E7FFF uncachable
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
[ 0.000000] 2 base 0000AF000000 mask FFFFFF000000 uncachable
[ 0.000000] 3 base 0000B0000000 mask FFFFF0000000 uncachable
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 000000012f000000 aka 4848M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: update [mem 0xaf000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xaf000 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fd810-0x000fd81f] mapped at [ffff8800000fd810]
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x0225a000, 0x0225afff] PGTABLE
[ 0.000000] BRK [0x0225b000, 0x0225bfff] PGTABLE
[ 0.000000] BRK [0x0225c000, 0x0225cfff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x12ee00000-0x12effffff]
[ 0.000000] [mem 0x12ee00000-0x12effffff] page 2M
[ 0.000000] BRK [0x0225d000, 0x0225dfff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x12c000000-0x12edfffff]
[ 0.000000] [mem 0x12c000000-0x12edfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x100001000-0x12bffffff]
[ 0.000000] [mem 0x100001000-0x1001fffff] page 4k
[ 0.000000] [mem 0x100200000-0x12bffffff] page 2M
[ 0.000000] BRK [0x0225e000, 0x0225efff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xada9ffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
[ 0.000000] [mem 0x40000000-0x7fffffff] page 1G
[ 0.000000] [mem 0x80000000-0xad9fffff] page 2M
[ 0.000000] [mem 0xada00000-0xada9ffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xae67c000-0xae67cfff]
[ 0.000000] [mem 0xae67c000-0xae67cfff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xae883000-0xaec9afff]
[ 0.000000] [mem 0xae883000-0xae9fffff] page 4k
[ 0.000000] [mem 0xaea00000-0xaebfffff] page 2M
[ 0.000000] [mem 0xaec00000-0xaec9afff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xaeff4000-0xaeffffff]
[ 0.000000] [mem 0xaeff4000-0xaeffffff] page 4k
[ 0.000000] ACPI: RSDP 00000000000f0490 00024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 00000000add8c078 00064 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 00000000add927d8 0010C (v05 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI BIOS Bug: Warning: Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20130117/tbfadt-599)
[ 0.000000] ACPI: DSDT 00000000add8c170 06667 (v02 ALASKA A M I 00000000 INTL 20051117)
[ 0.000000] ACPI: FACS 00000000ae0ec080 00040
[ 0.000000] ACPI: APIC 00000000add928e8 00072 (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 00000000add92960 00044 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: MCFG 00000000add929a8 0003C (v01 ALASKA A M I 01072009 MSFT 00010013)
[ 0.000000] ACPI: SSDT 00000000add93650 004B7 (v02 AMD ALIB 00000001 MSFT 04000000)
[ 0.000000] ACPI: HPET 00000000add92a40 00038 (v01 ALASKA A M I 01072009 AMI 00000005)
[ 0.000000] ACPI: BGRT 00000000add92a78 00038 (v00 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: SSDT 00000000add92ab0 00B9C (v01 AMD POWERNOW 00000001 AMD 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000012effffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x12effffff]
[ 0.000000] NODE_DATA [mem 0x12eff6000-0x12eff9fff]
[ 0.000000] [ffffea0000000000-ffffea00043fffff] PMD -> [ffff88012ae00000-ffff88012e1fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x12effffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009dfff]
[ 0.000000] node 0: [mem 0x00100000-0xada9ffff]
[ 0.000000] node 0: [mem 0xae67c000-0xae67cfff]
[ 0.000000] node 0: [mem 0xae883000-0xaec9afff]
[ 0.000000] node 0: [mem 0xaeff4000-0xaeffffff]
[ 0.000000] node 0: [mem 0x100001000-0x12effffff]
[ 0.000000] On node 0 totalpages: 904801
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3997 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 9684 pages used for memmap
[ 0.000000] DMA32 zone: 708293 pages, LIFO batch:31
[ 0.000000] Normal zone: 2632 pages used for memmap
[ 0.000000] Normal zone: 192511 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x10] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x11] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x12] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x13] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x05] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 5, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10228210 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] e820: [mem 0xaf000000-0xfebfffff] available for PCI devices
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 26 pages/cpu @ffff88012ec00000 s73856 r8192 d24448 u524288
[ 0.000000] pcpu-alloc: s73856 r8192 d24448 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 892408
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: root=/dev/ram0 rdinit=/init BOOT_IMAGE=/KERNEL boot=LABEL=System disk=LABEL=Storage ssh quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ 0 size 32 MB
[ 0.000000] Your BIOS doesn't leave a aperture memory hole
[ 0.000000] Please enable the IOMMU option in the BIOS setup
[ 0.000000] This costs you 64 MB of RAM
[ 0.000000] Mapping aperture over 65536 KB of RAM @ a4000000
[ 0.000000] Memory: 3414932k/4964352k available (6195k kernel code, 1345148k absent, 204272k reserved, 6702k data, 5440k init)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] CONFIG_RCU_FANOUT set to non-default value of 32
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[ 0.000000] NR_IRQS:4352 nr_irqs:712 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.003333] tsc: Detected 3718.434 MHz processor
[ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 7439.73 BogoMIPS (lpj=12394780)
[ 0.000004] pid_max: default: 32768 minimum: 301
[ 0.000221] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.001225] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.001686] Mount-cache hash table entries: 256
[ 0.001818] tseg: 00af000000
[ 0.001820] CPU: Physical Processor ID: 0
[ 0.001821] CPU: Processor Core ID: 0
[ 0.001824] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
[ 0.001824] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512
[ 0.001824] tlb_flushall_shift: 5
[ 0.001876] Freeing SMP alternatives: 16k freed
[ 0.001882] ACPI: Core revision 20130117
[ 0.003843] ACPI: All ACPI Tables successfully acquired
[ 0.026625] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.059585] smpboot: CPU0: AMD A10-6700 APU with Radeon(tm) HD Graphics (fam: 15, model: 13, stepping: 01)
[ 0.163022] Performance Events:
[ 0.163023] perf: AMD core performance counters detected
[ 0.163024] perf: AMD northbridge performance counters detected
[ 0.163027] AMD PMU driver.
[ 0.163029] ... version: 0
[ 0.163029] ... bit width: 48
[ 0.163030] ... generic registers: 10
[ 0.163031] ... value mask: 0000ffffffffffff
[ 0.163032] ... max period: 00007fffffffffff
[ 0.163033] ... fixed-purpose events: 0
[ 0.163033] ... event mask: 00000000000003ff
[ 0.163207] smpboot: Booting Node 0, Processors #1 #2 #3 OK
[ 0.202650] Brought up 4 CPUs
[ 0.202653] smpboot: Total of 4 processors activated (29759.95 BogoMIPS)
[ 0.203139] devtmpfs: initialized
[ 0.203324] PM: Registering ACPI NVS region [mem 0xadd94000-0xae0f4fff] (3543040 bytes)
[ 0.203403] PM: Registering ACPI NVS region [mem 0xae67d000-0xae882fff] (2121728 bytes)
[ 0.203509] xor: automatically using best checksumming function:
[ 0.236247] avx : 5224.800 MB/sec
[ 0.236291] NET: Registered protocol family 16
[ 0.236456] ACPI: bus type PCI registered
[ 0.236488] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.236490] PCI: not using MMCONFIG
[ 0.236491] PCI: Using configuration type 1 for base access
[ 0.236492] PCI: Using configuration type 1 for extended access
[ 0.237683] bio: create slab <bio-0> at 0
[ 0.292832] raid6: sse2x1 7689 MB/s
[ 0.349419] raid6: sse2x2 11998 MB/s
[ 0.406001] raid6: sse2x4 14199 MB/s
[ 0.406002] raid6: using algorithm sse2x4 (14199 MB/s)
[ 0.406004] raid6: using ssse3x2 recovery algorithm
[ 0.406017] ACPI: Added _OSI(Module Device)
[ 0.406018] ACPI: Added _OSI(Processor Device)
[ 0.406019] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.406020] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.406464] ACPI: EC: Look up EC in DSDT
[ 0.407020] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.409105] ACPI: Interpreter enabled
[ 0.409110] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130117/hwxface-568)
[ 0.409113] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130117/hwxface-568)
[ 0.409120] ACPI: (supports S0 S3 S5)
[ 0.409121] ACPI: Using IOAPIC for interrupt routing
[ 0.409225] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.409253] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.419947] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.432427] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.432690] PCI host bridge to bus 0000:00
[ 0.432693] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.432695] pci_bus 0000:00: root bus resource [io 0x0000-0x03af]
[ 0.432696] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7]
[ 0.432698] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df]
[ 0.432700] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.432701] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.432703] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
[ 0.432704] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xffffffff]
[ 0.432711] pci 0000:00:00.0: [1022:1410] type 00 class 0x060000
[ 0.432775] pci 0000:00:01.0: [1002:990c] type 00 class 0x030000
[ 0.432782] pci 0000:00:01.0: reg 10: [mem 0xd0000000-0xdfffffff pref]
[ 0.432786] pci 0000:00:01.0: reg 14: [io 0xf000-0xf0ff]
[ 0.432790] pci 0000:00:01.0: reg 18: [mem 0xfeb00000-0xfeb3ffff]
[ 0.432819] pci 0000:00:01.0: supports D1 D2
[ 0.432869] pci 0000:00:01.1: [1002:9902] type 00 class 0x040300
[ 0.432875] pci 0000:00:01.1: reg 10: [mem 0xfeb44000-0xfeb47fff]
[ 0.432909] pci 0000:00:01.1: supports D1 D2
[ 0.432983] pci 0000:00:10.0: [1022:7812] type 00 class 0x0c0330
[ 0.432999] pci 0000:00:10.0: reg 10: [mem 0xfeb4a000-0xfeb4bfff 64bit]
[ 0.433084] pci 0000:00:10.0: PME# supported from D0 D3hot D3cold
[ 0.433113] pci 0000:00:10.0: System wakeup disabled by ACPI
[ 0.433150] pci 0000:00:10.1: [1022:7812] type 00 class 0x0c0330
[ 0.433166] pci 0000:00:10.1: reg 10: [mem 0xfeb48000-0xfeb49fff 64bit]
[ 0.433251] pci 0000:00:10.1: PME# supported from D0 D3hot D3cold
[ 0.433280] pci 0000:00:10.1: System wakeup disabled by ACPI
[ 0.433320] pci 0000:00:11.0: [1022:7801] type 00 class 0x010601
[ 0.433334] pci 0000:00:11.0: reg 10: [io 0xf140-0xf147]
[ 0.433342] pci 0000:00:11.0: reg 14: [io 0xf130-0xf133]
[ 0.433349] pci 0000:00:11.0: reg 18: [io 0xf120-0xf127]
[ 0.433356] pci 0000:00:11.0: reg 1c: [io 0xf110-0xf113]
[ 0.433363] pci 0000:00:11.0: reg 20: [io 0xf100-0xf10f]
[ 0.433370] pci 0000:00:11.0: reg 24: [mem 0xfeb50000-0xfeb507ff]
[ 0.433443] pci 0000:00:12.0: [1022:7807] type 00 class 0x0c0310
[ 0.433453] pci 0000:00:12.0: reg 10: [mem 0xfeb4f000-0xfeb4ffff]
[ 0.433505] pci 0000:00:12.0: System wakeup disabled by ACPI
[ 0.433532] pci 0000:00:12.2: [1022:7808] type 00 class 0x0c0320
[ 0.433546] pci 0000:00:12.2: reg 10: [mem 0xfeb4e000-0xfeb4e0ff]
[ 0.433608] pci 0000:00:12.2: supports D1 D2
[ 0.433609] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.433626] pci 0000:00:12.2: System wakeup disabled by ACPI
[ 0.433652] pci 0000:00:13.0: [1022:7807] type 00 class 0x0c0310
[ 0.433662] pci 0000:00:13.0: reg 10: [mem 0xfeb4d000-0xfeb4dfff]
[ 0.433716] pci 0000:00:13.0: System wakeup disabled by ACPI
[ 0.433744] pci 0000:00:13.2: [1022:7808] type 00 class 0x0c0320
[ 0.433758] pci 0000:00:13.2: reg 10: [mem 0xfeb4c000-0xfeb4c0ff]
[ 0.433821] pci 0000:00:13.2: supports D1 D2
[ 0.433822] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.433840] pci 0000:00:13.2: System wakeup disabled by ACPI
[ 0.433867] pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500
[ 0.433960] pci 0000:00:14.2: [1022:780d] type 00 class 0x040300
[ 0.433976] pci 0000:00:14.2: reg 10: [mem 0xfeb40000-0xfeb43fff 64bit]
[ 0.434025] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.434038] pci 0000:00:14.2: System wakeup disabled by ACPI
[ 0.434060] pci 0000:00:14.3: [1022:780e] type 00 class 0x060100
[ 0.434134] pci 0000:00:14.4: [1022:780f] type 01 class 0x060401
[ 0.434187] pci 0000:00:14.4: System wakeup disabled by ACPI
[ 0.434215] pci 0000:00:15.0: [1022:43a0] type 01 class 0x060400
[ 0.434270] pci 0000:00:15.0: supports D1 D2
[ 0.434305] pci 0000:00:15.0: System wakeup disabled by ACPI
[ 0.434331] pci 0000:00:15.2: [1022:43a2] type 01 class 0x060400
[ 0.434385] pci 0000:00:15.2: supports D1 D2
[ 0.434411] pci 0000:00:15.2: System wakeup disabled by ACPI
[ 0.434437] pci 0000:00:18.0: [1022:1400] type 00 class 0x060000
[ 0.434485] pci 0000:00:18.1: [1022:1401] type 00 class 0x060000
[ 0.434534] pci 0000:00:18.2: [1022:1402] type 00 class 0x060000
[ 0.434582] pci 0000:00:18.3: [1022:1403] type 00 class 0x060000
[ 0.434633] pci 0000:00:18.4: [1022:1404] type 00 class 0x060000
[ 0.434680] pci 0000:00:18.5: [1022:1405] type 00 class 0x060000
[ 0.434769] pci 0000:01:06.0: [168c:0023] type 00 class 0x028000
[ 0.434790] pci 0000:01:06.0: reg 10: [mem 0xfea00000-0xfea0ffff]
[ 0.434937] pci 0000:00:14.4: PCI bridge to [bus 01] (subtractive decode)
[ 0.434942] pci 0000:00:14.4: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.434945] pci 0000:00:14.4: bridge window [io 0x0000-0x03af] (subtractive decode)
[ 0.434946] pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7] (subtractive decode)
[ 0.434948] pci 0000:00:14.4: bridge window [io 0x03b0-0x03df] (subtractive decode)
[ 0.434949] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.434951] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.434952] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
[ 0.434954] pci 0000:00:14.4: bridge window [mem 0xd0000000-0xffffffff] (subtractive decode)
[ 0.434997] pci 0000:00:15.0: PCI bridge to [bus 02]
[ 0.435062] pci 0000:03:00.0: [1969:1091] type 00 class 0x020000
[ 0.435084] pci 0000:03:00.0: reg 10: [mem 0xfe900000-0xfe93ffff 64bit]
[ 0.435095] pci 0000:03:00.0: reg 18: [io 0xe000-0xe07f]
[ 0.435193] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.439341] pci 0000:00:15.2: PCI bridge to [bus 03]
[ 0.439348] pci 0000:00:15.2: bridge window [io 0xe000-0xefff]
[ 0.439351] pci 0000:00:15.2: bridge window [mem 0xfe900000-0xfe9fffff]
[ 0.439466] acpi PNP0A03:00: Requesting ACPI _OSC control (0x1d)
[ 0.439590] acpi PNP0A03:00: ACPI _OSC control (0x1d) granted
[ 0.439838] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 6 7 10 11 14 15) *0
[ 0.439888] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 6 7 10 11 14 15) *0
[ 0.439940] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 6 7 10 11 14 15) *0
[ 0.439990] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 10 11 14 15) *0
[ 0.440030] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 6 7 10 11 14 15) *0
[ 0.440061] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 6 7 10 11 14 15) *0
[ 0.440093] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 6 7 10 11 14 15) *0
[ 0.440125] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 6 7 10 11 14 15) *0
[ 0.440223] acpi root: \_SB_.PCI0 notify handler is installed
[ 0.440244] Found 1 acpi root devices
[ 0.440314] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.440319] vgaarb: loaded
[ 0.440319] vgaarb: bridge control possible 0000:00:01.0
[ 0.440447] SCSI subsystem initialized
[ 0.440449] ACPI: bus type ATA registered
[ 0.440495] libata version 3.00 loaded.
[ 0.440510] ACPI: bus type USB registered
[ 0.440524] usbcore: registered new interface driver usbfs
[ 0.440532] usbcore: registered new interface driver hub
[ 0.440551] usbcore: registered new device driver usb
[ 0.440570] pps_core: LinuxPPS API ver. 1 registered
[ 0.440571] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.440574] PTP clock support registered
[ 0.440593] Advanced Linux Sound Architecture Driver Initialized.
[ 0.440594] PCI: Using ACPI for IRQ routing
[ 0.447156] PCI: pci_cache_line_size set to 64 bytes
[ 0.447198] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
[ 0.447200] e820: reserve RAM buffer [mem 0xadaa0000-0xafffffff]
[ 0.447201] e820: reserve RAM buffer [mem 0xae67d000-0xafffffff]
[ 0.447202] e820: reserve RAM buffer [mem 0xaec9b000-0xafffffff]
[ 0.447203] e820: reserve RAM buffer [mem 0xaf000000-0xafffffff]
[ 0.447204] e820: reserve RAM buffer [mem 0x12f000000-0x12fffffff]
[ 0.447327] Switching to clocksource hpet
[ 0.447434] pnp: PnP ACPI init
[ 0.447440] ACPI: bus type PNP registered
[ 0.447496] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.447499] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.447709] system 00:01: [io 0x04d0-0x04d1] has been reserved
[ 0.447711] system 00:01: [io 0x040b] has been reserved
[ 0.447712] system 00:01: [io 0x04d6] has been reserved
[ 0.447714] system 00:01: [io 0x0c00-0x0c01] has been reserved
[ 0.447716] system 00:01: [io 0x0c14] has been reserved
[ 0.447717] system 00:01: [io 0x0c50-0x0c51] has been reserved
[ 0.447719] system 00:01: [io 0x0c52] has been reserved
[ 0.447721] system 00:01: [io 0x0c6c] has been reserved
[ 0.447722] system 00:01: [io 0x0c6f] has been reserved
[ 0.447724] system 00:01: [io 0x0cd0-0x0cd1] has been reserved
[ 0.447725] system 00:01: [io 0x0cd2-0x0cd3] has been reserved
[ 0.447727] system 00:01: [io 0x0cd4-0x0cd5] has been reserved
[ 0.447728] system 00:01: [io 0x0cd6-0x0cd7] has been reserved
[ 0.447730] system 00:01: [io 0x0cd8-0x0cdf] has been reserved
[ 0.447732] system 00:01: [io 0x0800-0x089f] has been reserved
[ 0.447733] system 00:01: [io 0x0b20-0x0b3f] has been reserved
[ 0.447735] system 00:01: [io 0x0900-0x090f] has been reserved
[ 0.447737] system 00:01: [io 0x0910-0x091f] has been reserved
[ 0.447738] system 00:01: [io 0xfe00-0xfefe] has been reserved
[ 0.447740] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.447742] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.447744] system 00:01: [mem 0xfed80000-0xfed8ffff] has been reserved
[ 0.447746] system 00:01: [mem 0xfed61000-0xfed70fff] has been reserved
[ 0.447748] system 00:01: [mem 0xfec10000-0xfec10fff] has been reserved
[ 0.447749] system 00:01: [mem 0xfed00000-0xfed00fff] has been reserved
[ 0.447751] system 00:01: [mem 0xff000000-0xffffffff] has been reserved
[ 0.447753] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.447865] system 00:02: [io 0x0300-0x031f] has been reserved
[ 0.447867] system 00:02: [io 0x0290-0x029f] has been reserved
[ 0.447869] system 00:02: [io 0x0230-0x023f] has been reserved
[ 0.447871] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.447878] pnp 00:03: [dma 4]
[ 0.447892] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.447914] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.447929] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.447967] system 00:06: [io 0x04d0-0x04d1] has been reserved
[ 0.447969] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.447987] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.448010] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.448197] pnp 00:09: [dma 0 disabled]
[ 0.448231] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.448317] system 00:0a: [mem 0xb0000000-0xcfffffff] has been reserved
[ 0.448325] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.448372] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.448471] pnp 00:0c: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.448474] pnp: PnP ACPI: found 13 devices
[ 0.448475] ACPI: bus type PNP unregistered
[ 0.454436] pci 0000:00:14.4: PCI bridge to [bus 01]
[ 0.454441] pci 0000:00:14.4: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.454447] pci 0000:00:15.0: PCI bridge to [bus 02]
[ 0.454454] pci 0000:00:15.2: PCI bridge to [bus 03]
[ 0.454457] pci 0000:00:15.2: bridge window [io 0xe000-0xefff]
[ 0.454460] pci 0000:00:15.2: bridge window [mem 0xfe900000-0xfe9fffff]
[ 0.454562] pci_bus 0000:00: resource 4 [io 0x0000-0x03af]
[ 0.454564] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7]
[ 0.454565] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df]
[ 0.454566] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff]
[ 0.454568] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]
[ 0.454569] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]
[ 0.454571] pci_bus 0000:00: resource 10 [mem 0xd0000000-0xffffffff]
[ 0.454572] pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff]
[ 0.454574] pci_bus 0000:01: resource 4 [io 0x0000-0x03af]
[ 0.454575] pci_bus 0000:01: resource 5 [io 0x03e0-0x0cf7]
[ 0.454576] pci_bus 0000:01: resource 6 [io 0x03b0-0x03df]
[ 0.454577] pci_bus 0000:01: resource 7 [io 0x0d00-0xffff]
[ 0.454579] pci_bus 0000:01: resource 8 [mem 0x000a0000-0x000bffff]
[ 0.454580] pci_bus 0000:01: resource 9 [mem 0x000c0000-0x000dffff]
[ 0.454581] pci_bus 0000:01: resource 10 [mem 0xd0000000-0xffffffff]
[ 0.454583] pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
[ 0.454584] pci_bus 0000:03: resource 1 [mem 0xfe900000-0xfe9fffff]
[ 0.454685] NET: Registered protocol family 2
[ 0.454819] TCP established hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.454945] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.455051] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.455080] TCP: reno registered
[ 0.455086] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.455105] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.455216] NET: Registered protocol family 1
[ 0.455310] RPC: Registered named UNIX socket transport module.
[ 0.455311] RPC: Registered udp transport module.
[ 0.455312] RPC: Registered tcp transport module.
[ 0.455313] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.455320] pci 0000:00:01.0: Boot video device
[ 0.607430] PCI: CLS 64 bytes, default 64
[ 0.609810] PCI-DMA: Disabling AGP.
[ 0.609813] PCI-DMA: More than 4GB of RAM and no IOMMU
[ 0.609813] falling back to iommu=soft.
[ 0.609815] More than 4GB of memory but GART IOMMU not available.
[ 0.609815] falling back to iommu=soft.
[ 0.609817] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.609819] software IO TLB [mem 0xa9aa0000-0xadaa0000] (64MB) mapped at [ffff8800a9aa0000-ffff8800ada9ffff]
[ 0.610004] LVT offset 0 assigned for vector 0x400
[ 0.610022] perf: AMD IBS detected (0x000000ff)
[ 0.610289] microcode: CPU0: patch_level=0x00000000
[ 0.610298] microcode: CPU1: patch_level=0x00000000
[ 0.610302] microcode: CPU2: patch_level=0x00000000
[ 0.610307] microcode: CPU3: patch_level=0x00000000
[ 0.610330] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 0.611038] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.611139] NFS: Registering the id_resolver key type
[ 0.611148] Key type id_resolver registered
[ 0.611149] Key type id_legacy registered
[ 0.611243] fuse init (API version 7.21)
[ 0.611300] JFS: nTxBlock = 8192, nTxLock = 65536
[ 0.612774] SGI XFS with security attributes, large block/inode numbers, no debug enabled
[ 0.613160] Btrfs loaded
[ 0.613163] msgmni has been set to 6669
[ 0.613704] alg: No test for stdrng (krng)
[ 0.613727] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[ 0.613728] io scheduler noop registered
[ 0.613747] io scheduler cfq registered (default)
[ 0.613865] pcieport 0000:00:15.0: irq 40 for MSI/MSI-X
[ 0.613954] pcieport 0000:00:15.2: irq 41 for MSI/MSI-X
[ 0.614021] pcieport 0000:00:15.0: Signaling PME through PCIe PME interrupt
[ 0.614024] pcie_pme 0000:00:15.0:pcie01: service driver pcie_pme loaded
[ 0.614037] pcieport 0000:00:15.2: Signaling PME through PCIe PME interrupt
[ 0.614039] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[ 0.614042] pcie_pme 0000:00:15.2:pcie01: service driver pcie_pme loaded
[ 0.614112] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.614115] ACPI: Power Button [PWRB]
[ 0.614146] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.614147] ACPI: Power Button [PWRF]
[ 0.614282] ACPI: acpi_idle registered with cpuidle
[ 0.618059] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.638585] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.638854] Linux agpgart interface v0.103
[ 0.638887] [drm] Initialized drm 1.1.0 20060810
[ 0.639767] brd: module loaded
[ 0.639792] loop: module loaded
[ 0.639939] nbd: registered device at major 43
[ 0.640702] Loading iSCSI transport class v2.0-870.
[ 0.640779] iscsi: registered transport (tcp)
[ 0.640834] ahci 0000:00:11.0: version 3.0
[ 0.640939] ahci 0000:00:11.0: irq 42 for MSI/MSI-X
[ 0.641033] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 8 ports 6 Gbps 0xff impl SATA mode
[ 0.641036] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio sxs
[ 0.641745] scsi0 : ahci
[ 0.641816] scsi1 : ahci
[ 0.641862] scsi2 : ahci
[ 0.641907] scsi3 : ahci
[ 0.641952] scsi4 : ahci
[ 0.641998] scsi5 : ahci
[ 0.642045] scsi6 : ahci
[ 0.642089] scsi7 : ahci
[ 0.642114] ata1: SATA max UDMA/133 abar m2048@0xfeb50000 port 0xfeb50100 irq 42
[ 0.642116] ata2: SATA max UDMA/133 abar m2048@0xfeb50000 port 0xfeb50180 irq 42
[ 0.642118] ata3: SATA max UDMA/133 abar m2048@0xfeb50000 port 0xfeb50200 irq 42
[ 0.642120] ata4: SATA max UDMA/133 abar m2048@0xfeb50000 port 0xfeb50280 irq 42
[ 0.642122] ata5: SATA max UDMA/133 abar m2048@0xfeb50000 port 0xfeb50300 irq 42
[ 0.642124] ata6: SATA max UDMA/133 abar m2048@0xfeb50000 port 0xfeb50380 irq 42
[ 0.642126] ata7: SATA max UDMA/133 abar m2048@0xfeb50000 port 0xfeb50400 irq 42
[ 0.642128] ata8: SATA max UDMA/133 abar m2048@0xfeb50000 port 0xfeb50480 irq 42
[ 0.642434] pcnet32: pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de
[ 0.642449] Atheros(R) L2 Ethernet Driver - version 2.2.3
[ 0.642450] Copyright (c) 2007 Atheros Corporation.
[ 0.642495] cnic: Broadcom NetXtreme II CNIC Driver cnic v2.5.16 (Dec 05, 2012)
[ 0.642534] uli526x: ULi M5261/M5263 net driver, version 0.9.3 (2005-7-29)
[ 0.642543] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[ 0.642544] e100: Copyright(c) 1999-2006 Intel Corporation
[ 0.642556] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[ 0.642557] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 0.642567] e1000e: Intel(R) PRO/1000 Network Driver - 2.2.14-k
[ 0.642568] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[ 0.642580] igb: Intel(R) Gigabit Ethernet Network Driver - version 4.1.2-k
[ 0.642581] igb: Copyright (c) 2007-2013 Intel Corporation.
[ 0.642599] jme: JMicron JMC2XX ethernet driver version 1.0.8.5-jmmod
[ 0.642616] sky2: driver version 1.30
[ 0.642705] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.642706] ehci-pci: EHCI PCI platform driver
[ 0.642802] ehci-pci 0000:00:12.2: EHCI Host Controller
[ 0.642807] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 0.642814] QUIRK: Enable AMD PLL fix
[ 0.642816] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 0.642824] ehci-pci 0000:00:12.2: debug port 1
[ 0.642852] ehci-pci 0000:00:12.2: irq 17, io mem 0xfeb4e000
[ 0.650505] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 0.650704] hub 1-0:1.0: USB hub found
[ 0.650708] hub 1-0:1.0: 5 ports detected
[ 0.650863] ehci-pci 0000:00:13.2: EHCI Host Controller
[ 0.650867] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 0.650870] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 0.650878] ehci-pci 0000:00:13.2: debug port 1
[ 0.650903] ehci-pci 0000:00:13.2: irq 17, io mem 0xfeb4c000
[ 0.660497] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 0.660628] hub 2-0:1.0: USB hub found
[ 0.660632] hub 2-0:1.0: 5 ports detected
[ 0.660713] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.660805] ohci_hcd 0000:00:12.0: OHCI Host Controller
[ 0.660809] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
[ 0.660833] ohci_hcd 0000:00:12.0: irq 18, io mem 0xfeb4f000
[ 0.717938] hub 3-0:1.0: USB hub found
[ 0.717944] hub 3-0:1.0: 5 ports detected
[ 0.718094] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 0.718098] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 4
[ 0.718110] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfeb4d000
[ 0.774512] hub 4-0:1.0: USB hub found
[ 0.774519] hub 4-0:1.0: 5 ports detected
[ 0.774598] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.774623] Initializing USB Mass Storage driver...
[ 0.774640] usbcore: registered new interface driver usb-storage
[ 0.774641] USB Mass Storage support registered.
[ 0.774669] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.775081] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.775089] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.775159] mousedev: PS/2 mouse device common for all mice
[ 0.775316] rtc_cmos 00:04: RTC can wake from S4
[ 0.775405] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 0.775424] rtc_cmos 00:04: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.775431] i2c /dev entries driver
[ 0.775489] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 0.775621] softdog: Software Watchdog Timer: 0.08 initialized. soft_noboot=0 soft_margin=60 sec soft_panic=0 (nowayout=1)
[ 0.775665] cpuidle: using governor ladder
[ 0.775718] cpuidle: using governor menu
[ 0.775719] EFI Variables Facility v0.08 2004-May-17
[ 0.775721] No iBFT detected.
[ 0.775731] hidraw: raw HID events driver (C) Jiri Kosina
[ 0.775868] usbcore: registered new interface driver usbhid
[ 0.775869] usbhid: USB HID core driver
[ 0.775952] zram: Created 1 device(s) ...
[ 0.775993] Netfilter messages via NETLINK v0.30.
[ 0.776000] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 0.776072] ctnetlink v0.93: registering with nfnetlink.
[ 0.776100] TCP: cubic registered
[ 0.776173] NET: Registered protocol family 10
[ 0.776290] NET: Registered protocol family 17
[ 0.776304] Key type dns_resolver registered
[ 0.776919] rtc_cmos 00:04: setting system clock to 2013-07-01 21:09:27 UTC (1372712967)
[ 0.777003] acpi-cpufreq: overriding BIOS provided _PSD data
[ 0.777218] ALSA device list:
[ 0.777219] No soundcards found.
[ 0.960109] ata4: SATA link down (SStatus 0 SControl 300)
[ 0.960166] ata7: SATA link down (SStatus 0 SControl 300)
[ 0.960189] ata8: SATA link down (SStatus 0 SControl 300)
[ 0.960217] ata5: SATA link down (SStatus 0 SControl 300)
[ 0.960244] ata6: SATA link down (SStatus 0 SControl 300)
[ 1.063337] usb 1-4: new high-speed USB device number 4 using ehci-pci
[ 1.126547] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.126575] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.126597] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.127030] ata3.00: ATAPI: ASUS BC-12B1ST, 1.01, max UDMA/100
[ 1.127042] ata2.00: ATA-9: M4-CT064M4SSD2, 0009, max UDMA/100
[ 1.127046] ata2.00: 125045424 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.127484] ata2.00: configured for UDMA/100
[ 1.127576] ata3.00: configured for UDMA/100
[ 1.128382] ata1.00: ATA-8: Hitachi HDS5C3030ALA630, MEAOA800, max UDMA/133
[ 1.128387] ata1.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.130310] ata1.00: configured for UDMA/133
[ 1.130531] scsi 0:0:0:0: Direct-Access ATA Hitachi HDS5C303 MEAO PQ: 0 ANSI: 5
[ 1.130694] sd 0:0:0:0: [sda] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB)
[ 1.130728] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.130776] sd 0:0:0:0: [sda] Write Protect is off
[ 1.130780] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.130826] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.130871] scsi 1:0:0:0: Direct-Access ATA M4-CT064M4SSD2 0009 PQ: 0 ANSI: 5
[ 1.130980] sd 1:0:0:0: [sdb] 125045424 512-byte logical blocks: (64.0 GB/59.6 GiB)
[ 1.131009] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 1.131061] sd 1:0:0:0: [sdb] Write Protect is off
[ 1.131065] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.131087] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.131498] sdb: sdb1 sdb2 sdb3 sdb4
[ 1.131623] scsi 2:0:0:0: CD-ROM ASUS BC-12B1ST 1.01 PQ: 0 ANSI: 5
[ 1.131914] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 1.133698] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.133701] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.133882] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 1.133969] sr 2:0:0:0: Attached scsi generic sg2 type 5
[ 1.188894] Alternate GPT is invalid, using primary GPT.
[ 1.188910] sda: sda1 sda2
[ 1.189316] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.192928] Freeing unused kernel memory: 5440k freed
[ 1.194252] Write protecting the kernel read-only data: 12288k
[ 1.198849] Freeing unused kernel memory: 1984k freed
[ 1.202644] Freeing unused kernel memory: 1552k freed
[ 1.211921] uvesafb: (C) 1988-2010, Advanced Micro Devices, Inc., DVST, 01.00, OEM: AMD ATOMBIOS, VBE v3.0
[ 1.238052] uvesafb: VBIOS/hardware supports DDC2 transfers
[ 1.238948] uvesafb: monitor limits: vf = 76 Hz, hf = 83 kHz, clk = 180 MHz
[ 1.239029] uvesafb: scrolling: redraw
[ 1.293632] uvesafb: mode switch failed (eax=0x34f, err=0). Trying again with default timings.
[ 1.470714] uvesafb: mode switch failed (eax=0x34f, err=0). Trying again with default timings.
[ 1.604277] Console: switching to colour frame buffer device 80x30
[ 1.604312] uvesafb: mode switch failed (eax=0x34f, err=0). Trying again with default timings.
[ 1.609221] tsc: Refined TSC clocksource calibration: 3718.499 MHz
[ 1.609225] Switching to clocksource tsc
[ 1.639251] scsi8 : usb-storage 1-4:1.0
[ 1.737507] uvesafb: framebuffer at 0xd0000000, mapped to 0xffffc90010d80000, using 16384k, total 16384k
[ 1.737508] fb0: VESA VGA frame buffer device
[ 1.738807] xhci_hcd 0000:00:10.0: xHCI Host Controller
[ 1.738816] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 5
[ 1.739078] xhci_hcd 0000:00:10.0: irq 43 for MSI/MSI-X
[ 1.739085] xhci_hcd 0000:00:10.0: irq 44 for MSI/MSI-X
[ 1.739091] xhci_hcd 0000:00:10.0: irq 45 for MSI/MSI-X
[ 1.739097] xhci_hcd 0000:00:10.0: irq 46 for MSI/MSI-X
[ 1.739103] xhci_hcd 0000:00:10.0: irq 47 for MSI/MSI-X
[ 1.739343] xHCI xhci_add_endpoint called for root hub
[ 1.739348] xHCI xhci_check_bandwidth called for root hub
[ 1.739390] hub 5-0:1.0: USB hub found
[ 1.739400] hub 5-0:1.0: 2 ports detected
[ 1.739503] xhci_hcd 0000:00:10.0: xHCI Host Controller
[ 1.739510] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 6
[ 1.742486] xHCI xhci_add_endpoint called for root hub
[ 1.742487] xHCI xhci_check_bandwidth called for root hub
[ 1.742500] hub 6-0:1.0: USB hub found
[ 1.742505] hub 6-0:1.0: 2 ports detected
[ 1.759145] xhci_hcd 0000:00:10.1: xHCI Host Controller
[ 1.759157] xhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 7
[ 1.759407] xhci_hcd 0000:00:10.1: irq 48 for MSI/MSI-X
[ 1.759417] xhci_hcd 0000:00:10.1: irq 49 for MSI/MSI-X
[ 1.759425] xhci_hcd 0000:00:10.1: irq 50 for MSI/MSI-X
[ 1.759433] xhci_hcd 0000:00:10.1: irq 51 for MSI/MSI-X
[ 1.759440] xhci_hcd 0000:00:10.1: irq 52 for MSI/MSI-X
[ 1.759729] xHCI xhci_add_endpoint called for root hub
[ 1.759732] xHCI xhci_check_bandwidth called for root hub
[ 1.759764] hub 7-0:1.0: USB hub found
[ 1.759772] hub 7-0:1.0: 2 ports detected
[ 1.759870] xhci_hcd 0000:00:10.1: xHCI Host Controller
[ 1.759876] xhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 8
[ 1.762874] xHCI xhci_add_endpoint called for root hub
[ 1.762875] xHCI xhci_check_bandwidth called for root hub
[ 1.762887] hub 8-0:1.0: USB hub found
[ 1.762892] hub 8-0:1.0: 2 ports detected
[ 2.008684] usb 3-1: new low-speed USB device number 2 using ohci_hcd
[ 2.175996] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:12.0/usb3/3-1/3-1:1.0/input/input2
[ 2.176225] hid-generic 0003:046D:C00F.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:12.0-1/input0
[ 2.304895] usb 3-2: new low-speed USB device number 3 using ohci_hcd
[ 2.472719] input: LITEON Technology USB Multimedia Keyboard as /devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.0/input/input3
[ 2.472851] hid-generic 0003:046D:C312.0002: input,hidraw1: USB HID v1.10 Keyboard [LITEON Technology USB Multimedia Keyboard] on usb-0000:00:12.0-2/input0
[ 3.012748] scsi 8:0:0:0: Direct-Access SMI USB DISK 1100 PQ: 0 ANSI: 4
[ 3.013070] sd 8:0:0:0: Attached scsi generic sg3 type 0
[ 3.014489] sd 8:0:0:0: [sdc] 15826944 512-byte logical blocks: (8.10 GB/7.54 GiB)
[ 3.015481] sd 8:0:0:0: [sdc] Write Protect is off
[ 3.015489] sd 8:0:0:0: [sdc] Mode Sense: 43 00 00 00
[ 3.016483] sd 8:0:0:0: [sdc] No Caching mode page present
[ 3.016490] sd 8:0:0:0: [sdc] Assuming drive cache: write through
[ 3.019981] sd 8:0:0:0: [sdc] No Caching mode page present
[ 3.019988] sd 8:0:0:0: [sdc] Assuming drive cache: write through
[ 3.031567] sdc: sdc1 sdc2
[ 3.034422] sd 8:0:0:0: [sdc] No Caching mode page present
[ 3.034429] sd 8:0:0:0: [sdc] Assuming drive cache: write through
[ 3.034434] sd 8:0:0:0: [sdc] Attached SCSI removable disk
[ 4.120250] EXT4-fs (sdc1): couldn't mount as ext3 due to feature incompatibilities
[ 4.121429] EXT4-fs (sdc1): couldn't mount as ext2 due to feature incompatibilities
[ 4.125616] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
[ 10.978039] EXT4-fs (sdc2): couldn't mount as ext3 due to feature incompatibilities
[ 10.979109] EXT4-fs (sdc2): couldn't mount as ext2 due to feature incompatibilities
[ 10.991429] EXT4-fs (sdc2): mounted filesystem with ordered data mode. Opts: (null)
[ 18.960889] systemd-udevd[217]: starting version 204
[ 18.992577] wmi: Mapper loaded
[ 19.008937] hda-intel 0000:00:01.1: Force to non-snoop mode
[ 19.008975] snd_hda_intel 0000:00:01.1: irq 53 for MSI/MSI-X
[ 19.026923] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input4
[ 19.029343] cfg80211: Calling CRDA to update world regulatory domain
[ 19.075090] input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:14.2/sound/card1/input5
[ 19.077865] input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input6
[ 19.077925] input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input7
[ 19.078006] input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input8
[ 19.078094] input: HD-Audio Generic Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card1/input9
[ 19.078163] input: HD-Audio Generic Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card1/input10
[ 19.078233] input: HD-Audio Generic Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card1/input11
[ 19.078487] input: HD-Audio Generic Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card1/input12
[ 19.107388] sr0: CDROM not ready. Make sure there is a disc in the drive.
[ 19.114088] device fsid a9179013-b4db-47c6-b641-647749ec0db5 devid 1 transid 11087 /dev/sdb2
[ 19.116630] device fsid 7a7669e1-1bc3-49ff-8a09-339f4826a7a4 devid 1 transid 6306 /dev/sdb3
[ 19.153413] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 19.153417] Disabling lock debugging due to kernel taint
[ 19.179003] <6>[fglrx] Maximum main memory to use for locked dma buffers: 3192 MBytes.
[ 19.179078] <6>[fglrx] vendor: 1002 device: 990c count: 1
[ 19.179460] <6>[fglrx] ioport: bar 1, base 0xf000, size: 0x100
[ 19.179903] <6>[fglrx] Kernel PAT support is enabled
[ 19.179924] <6>[fglrx] module loaded - fglrx 13.10.10 [May 23 2013] with 1 minors
[ 19.483896] ath: EEPROM regdomain: 0x809c
[ 19.483899] ath: EEPROM indicates we should expect a country code
[ 19.483901] ath: doing EEPROM country->regdmn map search
[ 19.483903] ath: country maps to regdmn code: 0x52
[ 19.483905] ath: Country alpha2 being used: CN
[ 19.483906] ath: Regpair used: 0x52
[ 19.487610] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 19.487960] ieee80211 phy0: Atheros AR5416 MAC/BB Rev:2 AR2133 RF Rev:81 mem=0xffffc900127e0000, irq=21
[ 19.834077] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 19.869023] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 20.103416] fglrx_pci 0000:00:01.0: irq 54 for MSI/MSI-X
[ 20.104080] <6>[fglrx] Firegl kernel thread PID: 822
[ 20.104133] <6>[fglrx] Firegl kernel thread PID: 823
[ 20.104185] <6>[fglrx] Firegl kernel thread PID: 824
[ 20.104260] <6>[fglrx] IRQ 54 Enabled
[ 20.106965] <6>[fglrx] Reserved FB block: Shared offset:0, size:1000000
[ 20.106968] <6>[fglrx] Reserved FB block: Unshared offset:fc50000, size:3b0000
[ 20.106969] <6>[fglrx] Reserved FB block: Unshared offset:1ffee000, size:12000
[ 21.505172] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[ 21.540654] device fsid a9179013-b4db-47c6-b641-647749ec0db5 devid 1 transid 11087 /dev/sdb2
[ 21.541177] btrfs: disk space caching is enabled
[ 21.549395] Btrfs detected SSD devices, enabling SSD mode
[ 21.585890] device fsid 7a7669e1-1bc3-49ff-8a09-339f4826a7a4 devid 1 transid 6306 /dev/sdb3
[ 21.586396] btrfs: disk space caching is enabled
[ 21.592807] Btrfs detected SSD devices, enabling SSD mode
[ 22.447847] wlan0: authenticate with 00:1d:19:87:cc:96
[ 22.453130] wlan0: send auth to 00:1d:19:87:cc:96 (try 1/3)
[ 22.455062] wlan0: authenticated
[ 22.457062] wlan0: associate with 00:1d:19:87:cc:96 (try 1/3)
[ 22.462751] wlan0: RX AssocResp from 00:1d:19:87:cc:96 (capab=0x431 status=0 aid=1)
[ 22.462890] wlan0: associated
[ 22.462899] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 32.472174] EXT4-fs (sdc1): re-mounted. Opts: data=ordered,commit=0
[ 39.397934] EXT4-fs (sdc2): re-mounted. Opts: data=ordered,commit=0
[ 39.399546] EXT4-fs (sdb1): re-mounted. Opts: data=ordered,commit=0
[ 40.113258] hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
[ 42.506065] wlan0: deauthenticated from 00:1d:19:87:cc:96 (Reason: 1)
[ 42.512949] cfg80211: Calling CRDA for country: CN
[ 43.272561] wlan0: authenticate with 00:1d:19:87:cc:96
[ 43.276220] wlan0: send auth to 00:1d:19:87:cc:96 (try 1/3)
[ 43.384809] wlan0: send auth to 00:1d:19:87:cc:96 (try 2/3)
[ 43.468421] wlan0: authenticated
[ 43.471361] wlan0: associate with 00:1d:19:87:cc:96 (try 1/3)
[ 43.474149] wlan0: RX AssocResp from 00:1d:19:87:cc:96 (capab=0x431 status=0 aid=1)
[ 43.474291] wlan0: associated
[ 43.474323] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 43.759884] wlan0: deauthenticating from 00:1d:19:87:cc:96 by local choice (reason=3)
[ 43.762142] cfg80211: Calling CRDA to update world regulatory domain
[ 43.764674] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 43.789274] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 51.883934] wlan0: authenticate with 00:1d:19:87:cc:96
[ 51.887625] wlan0: send auth to 00:1d:19:87:cc:96 (try 1/3)
[ 51.992909] wlan0: send auth to 00:1d:19:87:cc:96 (try 2/3)
[ 52.009781] wlan0: authenticated
[ 52.012896] wlan0: associate with 00:1d:19:87:cc:96 (try 1/3)
[ 52.015840] wlan0: RX AssocResp from 00:1d:19:87:cc:96 (capab=0x431 status=0 aid=1)
[ 52.015985] wlan0: associated
[ 52.015994] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
');


[3.1.1] Slow IO - lostiniceland - 07-26-2013

I need to update this issue.

The slow IO seems to be cause by OE 3.1.1 (havent updated yet).

I connected the Data-Disk to my Windows-Desktop via Samba and included the sources to my library there. On my Desktop the library was updated within a couple of minutes, as I would expect on OE as well, even though I was accessing it wireless. There might be an issue in the GUI which slows down when accessing the disk.

Please let me know if I can provide more information using the commandline.