OpenELEC Forum
NTFS HDD with USB 3.0 Case - Printable Version

+- OpenELEC Forum (https://forum.openelec.tv)
+-- Forum: Generic Forum (https://forum.openelec.tv/forumdisplay.php?fid=5)
+--- Forum: STORAGE (https://forum.openelec.tv/forumdisplay.php?fid=60)
+--- Thread: NTFS HDD with USB 3.0 Case (/showthread.php?tid=72619)



NTFS HDD with USB 3.0 Case - hiswif - 08-29-2014

Hi,

i'm having some isues with my external HDD. Its an USB 3.0 Drive with an 3TB HD. The partition table is GPT and the filesystem ist NTFS. The disk doesn't mount in /media and when i try to mount the partition manualy i get the following error:

Code:
OpenELEC:~/tvshows # mount /dev/sdb /storage/tvshows/
mount: mounting /dev/sdb on /storage/tvshows/ failed: No medium found
Here is lsusb:
Code:
Bus 001 Device 004: ID 174c:5106 ASMedia Technology Inc. Transcend StoreJet 25M3
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.10
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x174c ASMedia Technology Inc.
idProduct 0x5106 Transcend StoreJet 25M3
bcdDevice 0.01
iManufacturer 2 ASMedia
iProduct 3 AS2105
iSerial 1 00000000000000000000
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 32
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xc0
Self Powered
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 8 Mass Storage
bInterfaceSubClass 6 SCSI
bInterfaceProtocol 80 Bulk-Only
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Binary Object Store Descriptor:
bLength 5
bDescriptorType 15
wTotalLength 22
bNumDeviceCaps 2
USB 2.0 Extension Device Capability:
bLength 7
bDescriptorType 16
bDevCapabilityType 2
bmAttributes 0x00000002
Link Power Management (LPM) Supported
SuperSpeed USB Device Capability:
bLength 10
bDescriptorType 16
bDevCapabilityType 3
bmAttributes 0x00
wSpeedsSupported 0x000e
Device can operate at Full Speed (12Mbps)
Device can operate at High Speed (480Mbps)
Device can operate at SuperSpeed (5Gbps)
bFunctionalitySupport 1
Lowest fully-functional device speed is Full Speed (12Mbps)
bU1DevExitLat 10 micro seconds
bU2DevExitLat 2047 micro seconds
Device Status: 0x0001
Self Powered

and the dmeq log whe i plugin the HDD:

Code:
[ 595.286652] usb 1-3: new high-speed USB device number 4 using ehci-pci
[ 596.375455] usb-storage 1-3:1.0: USB Mass Storage device detected
[ 596.375630] scsi8 : usb-storage 1-3:1.0
[ 597.377281] scsi 8:0:0:0: Direct-Access AS2105 0 PQ: 0 ANSI: 5
[ 597.377965] sd 8:0:0:0: Attached scsi generic sg2 type 0
[ 597.385768] sd 8:0:0:0: [sdb] Attached SCSI removable disk

The disk also doesn't showed in parted.
Code:
print all
Model: ATA SAMSUNG HD105SI (scsi)
Disk /dev/sda: 1000GB
Sector size (logical/physical): 512B/512B
Partition Table: gpt
Disk Flags:

Number Start End Size File system Name Flags
1 1049kB 255MB 254MB ext4 primary boot, legacy_boot
2 255MB 1000GB 1000GB ext4 primary
Thats only the internal disk.
So i can't mount the HD. What is wrong?

Hiswif


NTFS HDD with USB 3.0 Case - seo - 08-29-2014

hiswif post=115986 Wrote:Hi,

i'm having some isues with my external HDD. Its an USB 3.0 Drive with an 3TB HD. The partition table is GPT and the filesystem ist NTFS. The disk doesn't mount in /media and when i try to mount the partition manualy i get the following error:

Code:
OpenELEC:~/tvshows # mount /dev/sdb /storage/tvshows/
mount: mounting /dev/sdb on /storage/tvshows/ failed: No medium found
Here is lsusb:
Code:
Bus 001 Device 004: ID 174c:5106 ASMedia Technology Inc. Transcend StoreJet 25M3
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.10
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x174c ASMedia Technology Inc.
idProduct 0x5106 Transcend StoreJet 25M3
bcdDevice 0.01
iManufacturer 2 ASMedia
iProduct 3 AS2105
iSerial 1 00000000000000000000
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 32
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xc0
Self Powered
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 8 Mass Storage
bInterfaceSubClass 6 SCSI
bInterfaceProtocol 80 Bulk-Only
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Binary Object Store Descriptor:
bLength 5
bDescriptorType 15
wTotalLength 22
bNumDeviceCaps 2
USB 2.0 Extension Device Capability:
bLength 7
bDescriptorType 16
bDevCapabilityType 2
bmAttributes 0x00000002
Link Power Management (LPM) Supported
SuperSpeed USB Device Capability:
bLength 10
bDescriptorType 16
bDevCapabilityType 3
bmAttributes 0x00
wSpeedsSupported 0x000e
Device can operate at Full Speed (12Mbps)
Device can operate at High Speed (480Mbps)
Device can operate at SuperSpeed (5Gbps)
bFunctionalitySupport 1
Lowest fully-functional device speed is Full Speed (12Mbps)
bU1DevExitLat 10 micro seconds
bU2DevExitLat 2047 micro seconds
Device Status: 0x0001
Self Powered

and the dmeq log whe i plugin the HDD:

Code:
[ 595.286652] usb 1-3: new high-speed USB device number 4 using ehci-pci
[ 596.375455] usb-storage 1-3:1.0: USB Mass Storage device detected
[ 596.375630] scsi8 : usb-storage 1-3:1.0
[ 597.377281] scsi 8:0:0:0: Direct-Access AS2105 0 PQ: 0 ANSI: 5
[ 597.377965] sd 8:0:0:0: Attached scsi generic sg2 type 0
[ 597.385768] sd 8:0:0:0: [sdb] Attached SCSI removable disk

The disk also doesn't showed in parted.
Code:
print all
Model: ATA SAMSUNG HD105SI (scsi)
Disk /dev/sda: 1000GB
Sector size (logical/physical): 512B/512B
Partition Table: gpt
Disk Flags:

Number Start End Size File system Name Flags
1 1049kB 255MB 254MB ext4 primary boot, legacy_boot
2 255MB 1000GB 1000GB ext4 primary
Thats only the internal disk.
So i can't mount the HD. What is wrong?

Hiswif

your usb disk enclosure is broken. throw it or use only < 1TB (or better < 800GB) didks with it.


NTFS HDD with USB 3.0 Case - bircoe - 08-30-2014

Also when mounting disks you need to mount the partition you want, not the entire device, ie mount /dev/sdb1 or sdb2


NTFS HDD with USB 3.0 Case - hiswif - 09-07-2014

Quote:your usb disk enclosure is broken. throw it or use only < 1TB (or better < 800GB) didks with it.

How do you see that? I'm using it at my Desktop with Windows and Ubuntu without any problems. So it just don't work on my HTPC with openelec.

Quote:Also when mounting disks you need to mount the partition you want, not the entire device, ie mount /dev/sdb1 or sdb2

I know, but in /dev in no sdb1 only sdb. Thats just the problem. thats why i asked. The command "mount /dev/sdb" was only a try.

The thing is that i think like seo. But why does it work on other PC's? It's strange. How did you see that it is broken?

His


NTFS HDD with USB 3.0 Case - chewitt - 09-08-2014

Windows blindly trusts whatever geometry a USB adapter reports for a drive and it makes no checks on drive condition before use, so it will usually mount a screwed filesystem and if the stuff you're accessing is on an un-damaged part you may remain in blissful ignorance of a problem until it goes more seriously tits-up. Linux actively validates reported geometry (an occasional source of problems with cheap sata adapters and big drives) and checks all errors reported, and if problems are found it generally errors out and prevents mounting to avoid further damage to things. There are pros/cons to both approaches.


NTFS HDD with USB 3.0 Case - hiswif - 09-13-2014

Ok, makes sense to me. thank you very much.


NTFS HDD with USB 3.0 Case - boxygreg1982 - 10-05-2014

hiswif post=115986 Wrote:Hi,

i'm having some isues with my external HDD. Its an USB 3.0 Drive with an 3TB HD. The partition table is GPT and the filesystem ist NTFS. The disk doesn't mount in /media and when i try to mount the partition manualy i get the following error:

Code:
OpenELEC:~/tvshows # mount /dev/sdb /storage/tvshows/
mount: mounting /dev/sdb on /storage/tvshows/ failed: No medium found
Here is lsusb:
Code:
Bus 001 Device 004: ID 174c:5106 ASMedia Technology Inc. Transcend StoreJet 25M3
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.10
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x174c ASMedia Technology Inc.
idProduct 0x5106 Transcend StoreJet 25M3
bcdDevice 0.01
iManufacturer 2 ASMedia
iProduct 3 AS2105
iSerial 1 00000000000000000000
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 32
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xc0
Self Powered
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 8 Mass Storage
bInterfaceSubClass 6 SCSI
bInterfaceProtocol 80 Bulk-Only
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Binary Object Store Descriptor:
bLength 5
bDescriptorType 15
wTotalLength 22
bNumDeviceCaps 2
USB 2.0 Extension Device Capability:
bLength 7
bDescriptorType 16
bDevCapabilityType 2
bmAttributes 0x00000002
Link Power Management (LPM) Supported
SuperSpeed USB Device Capability:
bLength 10
bDescriptorType 16
bDevCapabilityType 3
bmAttributes 0x00
wSpeedsSupported 0x000e
Device can operate at Full Speed (12Mbps)
Device can operate at High Speed (480Mbps)
Device can operate at SuperSpeed (5Gbps)
bFunctionalitySupport 1
Lowest fully-functional device speed is Full Speed (12Mbps)
bU1DevExitLat 10 micro seconds
bU2DevExitLat 2047 micro seconds
Device Status: 0x0001
Self Powered

and the dmeq log whe i plugin the HDD:

Code:
[ 595.286652] usb 1-3: new high-speed USB device number 4 using ehci-pci
[ 596.375455] usb-storage 1-3:1.0: USB Mass Storage device detected
[ 596.375630] scsi8 : usb-storage 1-3:1.0
[ 597.377281] scsi 8:0:0:0: Direct-Access AS2105 0 PQ: 0 ANSI: 5
[ 597.377965] sd 8:0:0:0: Attached scsi generic sg2 type 0
[ 597.385768] sd 8:0:0:0: [sdb] Attached SCSI removable disk

The disk also doesn't showed in parted.
Code:
print all
Model: ATA SAMSUNG HD105SI (scsi)
Disk /dev/sda: 1000GB
Sector size (logical/physical): 512B/512B
Partition Table: gpt
Disk Flags:

Number Start End Size File system Name Flags
1 1049kB 255MB 254MB ext4 primary boot, legacy_boot
2 255MB 1000GB 1000GB ext4 primary
Thats only the internal disk.
So i can't mount the HD. What is wrong?

Hiswif

hi. if you are using the raspberry pi, like me, you could try to get a power supply with a bit more power like say, 5V 2.5A, then edit your config.txt file. i got this from

http://www.element14.com/community/community/raspberry-pi/raspberry-pi-bplus/blog/2014/07/19/home-network-with-just-the-raspberry-pi-b-and-a-usb-external-hdd

good luck.


NTFS HDD with USB 3.0 Case - nickr - 10-06-2014

Shouldn't the first partition on the drive be /dev/sdb1 not /dev/sdb?');