OpenELEC Forum
No Audio, Unless TV On Correct Channel At PowerOn - Printable Version

+- OpenELEC Forum (https://forum.openelec.tv)
+-- Forum: Generic Forum (https://forum.openelec.tv/forumdisplay.php?fid=5)
+--- Forum: AUDIO (https://forum.openelec.tv/forumdisplay.php?fid=53)
+--- Thread: No Audio, Unless TV On Correct Channel At PowerOn (/showthread.php?tid=76379)



No Audio, Unless TV On Correct Channel At PowerOn - Parad0x - 04-07-2015

Hi All,

Since updating to 5.0.8 (from 3.2), i don't get audio from my RPi via HDMI unless my TV is on the correct channel when the RPi powers on (which is rarely).

Output of tvservice below:

No Audio
Quote:LoungePi:~ # tvservice -s
state 0x120015 [DVI DMT (39) RGB full 16:9], 1360x768 @ 60.00Hz, progressive
LoungePi:~ # tvservice -a
PCM supported: Max channels: 2, Max samplerate: 32kHz, Max samplesize 16 bits.

Audio
Quote:LoungePi:~ # tvservice -s
state 0x12001a [HDMI CEA (16) RGB lim 16:9], 1920x1080 @ 60.00Hz, progressive
LoungePi:~ # tvservice -a
PCM supported: Max channels: 2, Max samplerate: 192kHz, Max samplesize 24 bits.
AC3 supported: Max channels: 6, Max samplerate: 48kHz, Max rate 640 kb/s.

How do i go about resolving this?

Thanks in advance!


No Audio, Unless TV On Correct Channel At PowerOn - Parad0x - 04-09-2015

Anyone??