OpenELEC Forum
Auto sync refresh rate: 23.976p works - 24p doesn' - Printable Version

+- OpenELEC Forum (https://forum.openelec.tv)
+-- Forum: Generic Forum (https://forum.openelec.tv/forumdisplay.php?fid=5)
+--- Forum: DISPLAY (https://forum.openelec.tv/forumdisplay.php?fid=59)
+--- Thread: Auto sync refresh rate: 23.976p works - 24p doesn' (/showthread.php?tid=76962)



Auto sync refresh rate: 23.976p works - 24p doesn' - ayami - 05-23-2015

Intel i5, nvidia 550ti, plasma TV on onkyo 508

This is my xorg.conf:
Code:
Section "Device"
Identifier "nvidia"
Driver "nvidia"
# Option "Coolbits" "4"
Option "DynamicTwinView" "False"
Option "NoFlip" "false"
Option "NoLogo" "true"
Option "ConnectToAcpid" "0"
Option "FlatPanelProperties" "Scaling = Native"
Option "ModeValidation" "NoVesaModes, NoXServerModes, NoHorizSyncCheck, NoVertRefreshCheck"
Option "HWCursor" "false"
# To put Xorg in debug mode change "false" to "true" in the line below:
Option "ModeDebug" "false"
# To use a local edid.bin file uncomment the 4 lines below (change DFP-0 to match your card)
Option "ConnectedMonitor" "DFP-1"
# Option "CustomEDID" "DFP-1:/storage/.config/edid.bin"
# Option "IgnoreEDID" "false"
# Option "UseEDID" "true"
EndSection

Section "Monitor"
# 1920x1080p @ 60Hz (EIA/CEA-861B)
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 26-81
VertRefresh 24-75
Modeline "1920x1080_60.00" 148.5 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync
Modeline "1920x1080_59.94" 148.3515 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync
Modeline "1920x1080_50.00" 148.50 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync
Modeline "1920x1080_29.97" 74.1756 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync
Modeline "1920x1080_25.00" 74.25 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync
ModeLine "1920x1080_24.00" 74.250 1920 2558 2602 2750 1080 1084 1089 1125 +hsync +vsync
ModeLine "1920x1080_23.976" 74.175 1920 2558 2602 2750 1080 1084 1089 1125 +hsync +vsync
# Option "DPMS"
Option "DPI" "96 x 96"
EndSection

Section "Screen"
Identifier "Screen0"
Device "nvidia0"
Monitor "Monitor0"
# Option "ColorRange" "Full"
Option "ColorRange" "Limited"
# Option "ColorSpace" "YCbCr444"
Option "ColorSpace" "RGB"
DefaultDepth 24
Option "ModeValidation" "NoVesaModes, NoXServerModes, NoHorizSyncCheck, NoVertRefreshCheck"
# Option "ExactModeTimingsDVI" "True"
SubSection "Display"
Depth 24
# Modes "1920x1080_60" "1920x1080_50" "1920x1080_24"
Modes "1920x1080_60" "1920x1080_50" "1920x1080_24" "1920x1080_23.976" "1920x1080_23.97" "1920x1080_23.9"
EndSubSection
EndSection

Section "Extensions"
Option "Composite" "Disable"
EndSection

In can't understan why Plasma with movies with 23.976p auto adjust refresh rate to 24 hz, nor with movies with 24p.

Thanks


Auto sync refresh rate: 23.976p works - 24p doesn' - ayami - 12-10-2015

with this xorg.conf it works B)

Code:
Section "Monitor"
Identifier "Monitor"
VendorName "Pioneer"
ModelName "pdp 5020"
HorizSync 25-31
VertRefresh 23-85
ModeLine "1920x1080_24" 74.250 1920 2558 2602 2750 1080 1084 1089 1125 +hsync +vsync
ModeLine "1920x1080_23.976" 74.176 1920 2558 2602 2750 1080 1084 1089 1125 +hsync +vsync
ModeLine "1920x1080_50" 148.500 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync
ModeLine "1920x1080_50i" 74.250 1920 2448 2492 2640 1080 1084 1094 1124 +hsync +vsync Interlace
ModeLine "1920x1080_60" 148.350 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync
ModeLine "1920x1080_60i" 74.180 1920 2008 2052 2200 1080 1084 1094 1124 +hsync +vsync Interlace
EndSection

Section "Device"
Identifier "nvidia"
Driver "nvidia"
Option "DynamicTwinView" "False"
Option "NoFlip" "false"
Option "NoLogo" "true"
Option "ConnectToAcpid" "0"
Option "FlatPanelProperties" "Scaling = Native"
Option "ModeValidation" "NoVesaModes, NoXServerModes, NoHorizSyncCheck, NoVertRefreshCheck, NoDFPNativeResolutionCheck"
Option "HWCursor" "false"
# To put Xorg in debug mode change "false" to "true" in the line below:
# Option "ModeDebug" "true"
# To use a local edid.bin file uncomment the 4 lines below (change DFP-0 to match your card)
# Option "ConnectedMonitor" "DFP-0"
# Option "CustomEDID" "DFP-0:/storage/.config/edid.bin"
# Option "IgnoreEDID" "false"
# Option "UseEDID" "true"
EndSection

Section "Screen"
Identifier "screen"
Device "nvidia"
Monitor "Monitor"
DefaultDepth 24
Option "ColorRange" "Limited"
Option "ExactModeTimingsDVI" "True"
SubSection "Display"
Modes "1920x1080_50" "1920x1080_23.976" "1920x1080_24" "1920x1080_60" "1920x1080_50i" "1920x1080_60i"
Depth 24
EndSubSection
EndSection