OpenELEC Forum
OpenELEC Update Available but doesn't update - Printable Version

+- OpenELEC Forum (https://forum.openelec.tv)
+-- Forum: Generic Forum (https://forum.openelec.tv/forumdisplay.php?fid=5)
+--- Forum: INSTALLATION (https://forum.openelec.tv/forumdisplay.php?fid=6)
+---- Forum: Update OpenELEC (https://forum.openelec.tv/forumdisplay.php?fid=7)
+---- Thread: OpenELEC Update Available but doesn't update (/showthread.php?tid=91276)



OpenELEC Update Available but doesn't update - ShaunJ - 05-17-2019

Hello everyone,,
OpenELEC (official) Version: 6.0.3 on Raspberry Pi 3. I copied the tar file for the latest v7 to /storage/.update/ and rebooted. It said the update was found and extracting the tar and then once it started it says, Update Available. I see it's replaced the tar file with KERNEL.md5 SYSTEM in the /storage/.update/ dir but as far as I can showbox.bio/ tutuapp.uno/ vidmate.vet/ tell nothing is happening. More reboots and it says, Update Available. Updates are set to Auto and I can't find anywhere to tell it to install the update. Is /storage not large enough?

/dev/mmcblk0p2 1.3G 1.2G 134.3M 90% /storage

If the update doesn't work out I'll just install a fresh copy. My config is pretty simple.