TVHeadend NAS recording location help

[Gaigebacca]

Ok, I have been able to successfully get the EPG, TVHeadend, the HDHomerun, and my AD10 with OE3.1.5 all working nicely together. The last issue is getting it to set the TV recording location. I want it to save to the NAS I have on my network where all the rest of my media is stored. But even when I put in the address as follows:

nfs://192.xxx.xxx.xxx/c/media/tv shows/recorded tv

It still says that it cannot find the file when I tell the recording to stop. This is the last aspect of this that I am struggling with, and I have found little online to give me any real kind of direction. Hoping someone here has some suggestions. ide:

[Hardcorejax]

http://openelec.tv/forum/71-pvr-live-tv/...rd-live-tv

[Gaigebacca]

Ok, I have tried every option on the link, and this is as far as I can get:

#!/bin/sh
(sleep 30;
mount -t nfs 192.168.1.14:/nfs/media/Recordings /storage/Recordings -o nolock;
)&

OpenELEC:~/.config # ./autostart.sh
OpenELEC:~/.config # mount: 192.168.1.14:/nfs/media/Recordings failed, reason given by server: Permission denied
mount: mounting 192.168.1.14:/nfs/media/Recordings on /storage/Recordings failed: Bad file descriptor

OE will record to the local storage/Recordings folder, but nothing ever shows up on the NAS folder. It just keeps it local, and never pushes it to the NAS location.

Not sure where to go from here...

Also, I am using a ReadyNAS NV+ v2 for the NAS. It has both NFS and SMB sharing enabled, and no security set on the share folders, all users should have r/w access.

[Hardcorejax]

http://openelec.tv/forum/76-network-file...?start=240

[Gaigebacca]

Ok, tried this, and this is all I get... Operation not supported.

#!/bin/bash
n=1
until ping -w 1 -c 1 "192.168.1.14"
do
sleep 1
n=$(( n+1 ))
if [ $n -eq 50 ]
then
break
fi
done
mkdir -p "/media/Recordings"
mount -t cifs //192.168.1.14/Recordings /media/Recordings -o username=user,password=b,unc=\\192.168.1.14\Recordings

OpenELEC (official) Version: 3.1.5
OpenELEC:~ # cd /storage/.config
OpenELEC:~/.config # ./autostart.sh
PING 192.168.1.14 (192.168.1.14): 56 data bytes
64 bytes from 192.168.1.14: seq=0 ttl=64 time=0.398 ms

--- 192.168.1.14 ping statistics ---
1 packets transmitted, 1 packets received, 0% packet loss
round-trip min/avg/max = 0.398/0.398/0.398 ms
mount: mounting //192.168.1.14/Recordings on /media/Recordings failed: Operation not supported

The created user, is a user setup on the NAS itself, is there somewhere else I need to setup a user in the OpenElec box as well? If so, where?

[Gaigebacca]

Any other suggestions?

[Gaigebacca]

Ok, it seems that I was able to get it to work properly now. The command also requires sec=ntlm in the line in order to properly mount the folder on OE 3.1.5. My autostart.sh command looks like this now, and is properly mounting and sending data to the remote folder on the NAS.

mount -t cifs //192.168.1.14/Recordings /media/Recordings -o username=user,password=bigdog83,sec=ntlm,unc=\\192.168.1.14\Recordings