'Configuration a TV-Tuner FAQ?

[tobias]

looks like the same problem i ran into at first ...

its a openelec problem. the firmware for your reciever is not included.
post a "[request][ion/generic/intel] firmware" threat as Feature Suggestions. read the Notice first, and be patient. the firmware for your tv-card will most likely be included than.

[ultraman]

It seems that this tuner is supported in the kernel. Just post a new request like Tobias wrote.

http://linuxtv.org/wiki/index.php/TeVii_S470
Kernel 2.6.33 and newer: Those kernels have in-build drivers.

[Media-Man]

Thanks guys, i opened a request

[sraue]

moved topic away from feature requests

[Media-Man]

It works!!! Thanks! :cheer:

[Media-Man]

New Problem illy:

The Only Version which is functionally with tvheadend for me is this build
OpenELEC-Intel.x86_64-devel-20110616-r7247
All newer builds have the problem that there is no oppurtunity to scan for muxes.
I'll hang some screens on

First: Functionally
[attachment=271]7247.jpg[/attachment]
Second: Problem ide:
[attachment=272]7485forexample.jpg[/attachment]

--------------------

I think the problem is in

    Problem_2011-07-21.jpg[/attachment]
But the configuration which i made was the same

[tobias]

Have you tried to use the "add DVB-Network by location" ?
I'm not sure if that is for DVB-T only, but it might give you some Muxes to scan.

On the other hand, I noticed, that changing between Openelec-Versions seems to confuse tvheadend. After some updates it didn't function anymore. Stored tv-services had a bad signal, no initial scan with new adapters, sceduled recordings only work when using the web-if etc...
After formating the HDD with a Life-CD and a really clean reinstallation it was all fine. But after a while - all broken again.
I have only little hope that openelec and tv will get much better soon. It's low-priority for XBMC developers as you can read in their forum.

[Media-Man]

Hi!

Have you tried to use the "add DVB-Network by location" ?

Yes of Course i made always the same configuration:

Go to the TVheadend GUI by visiting http://yourserver:9981/
Go to configuration -> tv adapters and select a tv adapter.
Set the "NIT-o Network ID". You can find that in your provider's manual. NOT
Enable "Autodetect muxes" and "Idle scanning"
Then select "Add DVB Network by location"
Click "save"

I'm not sure if that is for DVB-T only, but it might give you some Muxes to scan.

I'm using DVB-S but there should be no problem with it


I don't know what happens between the version 7247 and the newer one, what has changed what the problem causes?


-----------------------------------------------------------------------

So... i had installed 7247 configured the right tuner etc. pp and it worked. Than i made a directly update to the current dev. build 7535.

Now he still find the Services and Muxes and there are also the channels all the same how it was in 7247. But if i try to start a TV channel on the HTS TVHeadEnd Client on the openelec Machine it show me nothing an it goes back to the mainmenu.

The radio cahnnels are functionally :S

-----------------------------------------------------------------------

I made another scan and now it works illy: Very strange