01-13-2015, 10:10 AM
Hi at all, I hope someone can help me with this issue I'm becoming crazy.
Environment:
Zotac PC with hdmi audio / video output over HDMI, installed Openelec 5.0.0 x86_64
Yamaha RX2065 with hdmi input
Issue:
when the zotac PC goes in stand by (after 20 mins on no activity) when I resume from stand by and play a movie
I have missing Audio at all (Yamaha AV does not display any ch icon for the active channels, for example 2.0 or 5.1)
The only WORKAROUND found is reboot Openelec and I will get back the icon of 5.1 ch on my yamaha.
With version OpenElec 4.2 it was working fine, no reboot required for months.
ALREADY TRYED UNSUCCESFULLY in Openelec configuration:
Power on AV receiver before/after resume PC from stand by
Power off then on Yamaha AV
Set audio output to always ON
Changed Optimezed/best match audio settings
Enabled / disabled Passtrought
Changed Audio output to hdmi 0 and hdmi 1 (works only with hdmi 0 , there is only one hdmi)
Please help me.
Environment:
Zotac PC with hdmi audio / video output over HDMI, installed Openelec 5.0.0 x86_64
Yamaha RX2065 with hdmi input
Issue:
when the zotac PC goes in stand by (after 20 mins on no activity) when I resume from stand by and play a movie
I have missing Audio at all (Yamaha AV does not display any ch icon for the active channels, for example 2.0 or 5.1)
The only WORKAROUND found is reboot Openelec and I will get back the icon of 5.1 ch on my yamaha.
With version OpenElec 4.2 it was working fine, no reboot required for months.
ALREADY TRYED UNSUCCESFULLY in Openelec configuration:
Power on AV receiver before/after resume PC from stand by
Power off then on Yamaha AV
Set audio output to always ON
Changed Optimezed/best match audio settings
Enabled / disabled Passtrought
Changed Audio output to hdmi 0 and hdmi 1 (works only with hdmi 0 , there is only one hdmi)
Please help me.