Re: **SOLVED** Passthrough all audio to AV Receiver?

[DiRTDOG]

Hello all,
I just switched from a home baked HTPC using a ASROCK H67M-ITX/HT mobo with optical out for audio and HDMI for Video to my AV Receiver to a Gigabyte GB-BXi5H-5200 Brix unit connected to my AV Receiver via HDMI because it has no optical out. Since the switch when ever I play 2.0 audio it will pass to my AV Receiver and pass to my TV so I get to audio streams playing at the same time (echo effect). In the audio output options I have the HDMI #0,ONKYO set as the source and also as the passthrough source.

Is there a way to just pass through all the audio to the receiver so none of it goes to my tv. The Brix is connected directly to the AV Receiver via HDMI and then of course the TV is connected to the AV Receiver via HDMI. I am not quit understanding why audio is being played through my TV if

Any help will be appreciated.

TIA

[rvsixer]

Somewhere in the receiver setup there is an option to pass/clone/sync audio output through the monitor port. Disable it.

[Gaudi]

I had the same echo problem and "solved" it adjusting the audio delay in my receiver to perfectly match the TV speakers.
So, if I get double audio, it is in sync. If pass through is enabled, audio comes from receiver.
Best way is to do it listening to the GUI clicks.

[DiRTDOG]

Somewhere in the receiver setup there is an option to pass/clone/sync audio output through the monitor port. Disable it.

Thank you this did it, I am not sure why it changed though.

[Gaudi]

Glad you solved it!

[rvsixer]

Nice !

[nickr]

Turn the tv down - why would you want crappy tv speakers on when you are getting audio from your glorious avr?