Unable to solve external usb hd UAS problem

[alocin]

Hello,

i'm running Openelec 6.0 on a asrock E350M1 and i've a problem with my external usb HD and i think it's related to UAS compatibility.

The error i get on dmesg is:

Code:

[ 1421.501382] sd 6:0:0:0: [sda] tag#0 uas_eh_abort_handler 0 uas-tag 1 inflight: CMD
[ 1421.501406] sd 6:0:0:0: [sda] tag#0 CDB: opcode=0x28 28 00 4a fc 10 00 00 00 20 00
[ 1421.501463] scsi host6: uas_eh_bus_reset_handler start
[ 1421.608019] usb 1-2: reset high-speed USB device number 2 using ehci-pci
[ 1421.733538] scsi host6: uas_eh_bus_reset_handler success

and obviously the video or music i'm playng freez.

I've tried to create a file "uas.conf" in /storage/.config/modprobe.d with the following line:
options usb-storage quirks=174c:55aa:u

The PID and VID are the one i found with lsusb:
Bus 001 Device 002: ID 174c:55aa ASMedia Technology Inc. ASM1051 SATA 3Gb/s bridge

But don't seem to have effect on the usb-storage module

Code:

[ 1.453806] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.453812] ehci-pci: EHCI PCI platform driver
[ 1.453946] QUIRK: Enable AMD PLL fix
[ 1.453981] ehci-pci 0000:00:12.2: EHCI Host Controller
[ 1.453996] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 1.454008] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.454022] ehci-pci 0000:00:12.2: debug port 1
[ 1.454089] ehci-pci 0000:00:12.2: irq 17, io mem 0xfeb4d000
[ 1.462585] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 1.462999] hub 1-0:1.0: USB hub found
[ 1.463016] hub 1-0:1.0: 5 ports detected
[ 1.463444] ehci-pci 0000:00:13.2: EHCI Host Controller
[ 1.463457] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
[ 1.463466] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.463480] ehci-pci 0000:00:13.2: debug port 1
[ 1.463523] ehci-pci 0000:00:13.2: irq 17, io mem 0xfeb4b000
[ 1.472569] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 1.472957] hub 2-0:1.0: USB hub found
[ 1.472972] hub 2-0:1.0: 5 ports detected
[ 1.473373] ehci-pci 0000:00:16.2: EHCI Host Controller
[ 1.473385] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 3
[ 1.473394] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.473407] ehci-pci 0000:00:16.2: debug port 1
[ 1.473452] ehci-pci 0000:00:16.2: irq 17, io mem 0xfeb48000
[ 1.482569] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
[ 1.482943] hub 3-0:1.0: USB hub found
[ 1.482957] hub 3-0:1.0: 4 ports detected
[ 1.483228] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.483248] ohci-pci: OHCI PCI platform driver
[ 1.483410] ohci-pci 0000:00:12.0: OHCI PCI host controller
[ 1.483424] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 4
[ 1.483485] ohci-pci 0000:00:12.0: irq 18, io mem 0xfeb4e000
[ 1.540258] hub 4-0:1.0: USB hub found
[ 1.540276] hub 4-0:1.0: 5 ports detected
[ 1.540660] ohci-pci 0000:00:13.0: OHCI PCI host controller
[ 1.540677] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5
[ 1.540714] ohci-pci 0000:00:13.0: irq 18, io mem 0xfeb4c000
[ 1.596907] hub 5-0:1.0: USB hub found
[ 1.596925] hub 5-0:1.0: 5 ports detected
[ 1.597307] ohci-pci 0000:00:14.5: OHCI PCI host controller
[ 1.597320] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 6
[ 1.597357] ohci-pci 0000:00:14.5: irq 18, io mem 0xfeb4a000
[ 1.625206] tsc: Refined TSC clocksource calibration: 1599.999 MHz
[ 1.625213] clocksource tsc: mask: 0xffffffffffffffff max_cycles: 0x171023f09ff, max_idle_ns: 440795233615 ns
[ 1.653581] hub 6-0:1.0: USB hub found
[ 1.653599] hub 6-0:1.0: 2 ports detected
[ 1.653910] ohci-pci 0000:00:16.0: OHCI PCI host controller
[ 1.653924] ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 7
[ 1.653961] ohci-pci 0000:00:16.0: irq 18, io mem 0xfeb49000
[ 1.710272] hub 7-0:1.0: USB hub found
[ 1.710289] hub 7-0:1.0: 4 ports detected
[ 1.710559] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.710656] usbcore: registered new interface driver uas
[ 1.710729] usbcore: registered new interface driver usb-storage

And the hd continue to be mounted with uas enabled:

Code:

[ 1.769230] usb 1-2: new high-speed USB device number 2 using ehci-pci
[ 1.896525] scsi host6: uas
[ 1.898110] scsi 6:0:0:0: Direct-Access Inateck ASM1153E 0 PQ: 0 ANSI: 6
[ 1.900310] sd 6:0:0:0: Attached scsi generic sg0 type 0
[ 1.901220] sd 6:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 1.901232] sd 6:0:0:0: [sda] 4096-byte physical blocks
[ 1.902708] sd 6:0:0:0: [sda] Write Protect is off
[ 1.902721] sd 6:0:0:0: [sda] Mode Sense: 43 00 00 00
[ 1.903453] sd 6:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

I'm doing something wrong?

Any help would be appreciated

Nicola

[beredim]

I also had UAS problems recently, but didn't have time to investigate (could be the same thing as yours or a totally unerated issue) further.

One thing I tried (maybe you can try this and report back) and seems to be working is to bypass the problem temporarily by connecting the external HDD using a USB 2.0 cable

This should cause the kernel to fallback to the USB 2.0 driver (no UAS there :-) )

[beredim]

These are my issues with UAS:
System: NUC5CPYH
USB 3.0 External Enclosure with all 4 HDDs slots filled - Raidsonic IB-3664SU3 (http://www.raidsonic.de/en/index.php?we_objectID=2317)
Symptoms: slow speeds, USB connection freezing and resetting/resyncing when copying to external HDD enclosure, tried two different USB 3.0 cables
Problem can be "bypassed" by using a USB 2.0 cable

dmesg: (this is during a simple file copy from internal SATA HDD to USB 3.0 enclosure)
After the file copy ends the copied file does not hash the same as the source file. Slight differences here and there.

Code:

[ 577.587157] xhci_hcd 0000:00:14.0: ERROR Transfer event for disabled endpoint or incorrect stream ring
[ 577.587167] xhci_hcd 0000:00:14.0: @0000000002a421a0 00000000 00000000 04000000 03088000
[ 608.355356] sd 2:0:0:2: [sdd] tag#1 uas_eh_abort_handler 0 uas-tag 2 inflight: CMD OUT
[ 608.355369] sd 2:0:0:2: [sdd] tag#1 CDB: opcode=0x8a 8a 00 00 00 00 00 4c 92 e1 80 00 00 04 00 00 00
[ 608.355451] sd 2:0:0:2: [sdd] tag#2 uas_eh_abort_handler 0 uas-tag 3 inflight: CMD OUT
[ 608.355456] sd 2:0:0:2: [sdd] tag#2 CDB: opcode=0x8a 8a 00 00 00 00 00 4c 92 e5 80 00 00 04 00 00 00
[ 608.355731] sd 2:0:0:2: [sdd] tag#3 uas_eh_abort_handler 0 uas-tag 4 inflight: CMD OUT
[ 608.355746] sd 2:0:0:2: [sdd] tag#3 CDB: opcode=0x8a 8a 00 00 00 00 00 4c 92 e9 80 00 00 04 00 00 00
[ 608.355792] sd 2:0:0:2: [sdd] tag#4 uas_eh_abort_handler 0 uas-tag 5 inflight: CMD OUT
[ 608.355798] sd 2:0:0:2: [sdd] tag#4 CDB: opcode=0x8a 8a 00 00 00 00 00 4c 92 ed 80 00 00 04 00 00 00
[ 608.355919] sd 2:0:0:2: [sdd] tag#0 uas_eh_abort_handler 0 uas-tag 1 inflight: CMD OUT
[ 608.355927] sd 2:0:0:2: [sdd] tag#0 CDB: opcode=0x8a 8a 00 00 00 00 00 4c 92 f1 80 00 00 04 00 00 00
[ 608.355968] sd 2:0:0:2: [sdd] tag#5 uas_eh_abort_handler 0 uas-tag 6 inflight: CMD OUT
[ 608.355974] sd 2:0:0:2: [sdd] tag#5 CDB: opcode=0x8a 8a 00 00 00 00 00 4c 92 f5 80 00 00 04 00 00 00
[ 608.356095] sd 2:0:0:2: [sdd] tag#6 uas_eh_abort_handler 0 uas-tag 7 inflight: CMD OUT
[ 608.356103] sd 2:0:0:2: [sdd] tag#6 CDB: opcode=0x8a 8a 00 00 00 00 00 4c 92 f9 80 00 00 04 00 00 00
[ 608.356142] sd 2:0:0:2: [sdd] tag#7 uas_eh_abort_handler 0 uas-tag 8 inflight: CMD OUT
[ 608.356147] sd 2:0:0:2: [sdd] tag#7 CDB: opcode=0x8a 8a 00 00 00 00 00 4c 92 fd 80 00 00 04 00 00 00
[ 608.356270] sd 2:0:0:2: [sdd] tag#8 uas_eh_abort_handler 0 uas-tag 9 inflight: CMD OUT
[ 608.356278] sd 2:0:0:2: [sdd] tag#8 CDB: opcode=0x8a 8a 00 00 00 00 00 4c 93 01 80 00 00 04 00 00 00
[ 608.356318] sd 2:0:0:2: [sdd] tag#9 uas_eh_abort_handler 0 uas-tag 10 inflight: CMD OUT
[ 608.356324] sd 2:0:0:2: [sdd] tag#9 CDB: opcode=0x8a 8a 00 00 00 00 00 4c 93 05 80 00 00 04 00 00 00
[ 608.356474] sd 2:0:0:2: [sdd] tag#10 uas_eh_abort_handler 0 uas-tag 11 inflight: CMD OUT
[ 608.356481] sd 2:0:0:2: [sdd] tag#10 CDB: opcode=0x8a 8a 00 00 00 00 00 4c 93 09 80 00 00 04 00 00 00
[ 608.356520] sd 2:0:0:2: [sdd] tag#11 uas_eh_abort_handler 0 uas-tag 12 inflight: CMD OUT
[ 608.356526] sd 2:0:0:2: [sdd] tag#11 CDB: opcode=0x8a 8a 00 00 00 00 00 4c 93 0d 80 00 00 04 00 00 00
[ 608.356630] scsi host2: uas_eh_bus_reset_handler start
[ 608.462787] usb 2-1: reset SuperSpeed USB device number 2 using xhci_hcd
[ 608.480157] scsi host2: uas_eh_bus_reset_handler success
[ 614.215781] xhci_hcd 0000:00:14.0: ERROR Transfer event for disabled endpoint or incorrect stream ring
[ 614.215789] xhci_hcd 0000:00:14.0: @0000000002a42fe0 00000000 00000000 04000000 03088000
[ 644.407528] sd 2:0:0:2: [sdd] tag#6 uas_eh_abort_handler 0 uas-tag 7 inflight: CMD OUT
[ 644.407543] sd 2:0:0:2: [sdd] tag#6 CDB: opcode=0x8a 8a 00 00 00 00 00 5f 1e b1 68 00 00 04 00 00 00
[ 644.407632] sd 2:0:0:2: [sdd] tag#3 uas_eh_abort_handler 0 uas-tag 4 inflight: CMD OUT
[ 644.407638] sd 2:0:0:2: [sdd] tag#3 CDB: opcode=0x8a 8a 00 00 00 00 00 5f 1e b5 68 00 00 04 00 00 00
[ 644.407794] sd 2:0:0:2: [sdd] tag#4 uas_eh_abort_handler 0 uas-tag 5 inflight: CMD OUT
[ 644.407808] sd 2:0:0:2: [sdd] tag#4 CDB: opcode=0x8a 8a 00 00 00 00 00 5f 1e b9 68 00 00 04 00 00 00
[ 644.407854] sd 2:0:0:2: [sdd] tag#10 uas_eh_abort_handler 0 uas-tag 11 inflight: CMD OUT
[ 644.407859] sd 2:0:0:2: [sdd] tag#10 CDB: opcode=0x8a 8a 00 00 00 00 00 5f 1e bd 68 00 00 04 00 00 00
[ 644.407920] sd 2:0:0:2: [sdd] tag#5 uas_eh_abort_handler 0 uas-tag 6 inflight: CMD OUT
[ 644.407927] sd 2:0:0:2: [sdd] tag#5 CDB: opcode=0x8a 8a 00 00 00 00 00 5f 1e c1 68 00 00 04 00 00 00
[ 644.407966] sd 2:0:0:2: [sdd] tag#0 uas_eh_abort_handler 0 uas-tag 1 inflight: CMD OUT
[ 644.407972] sd 2:0:0:2: [sdd] tag#0 CDB: opcode=0x8a 8a 00 00 00 00 00 5f 1e c5 68 00 00 04 00 00 00
[ 644.408102] sd 2:0:0:2: [sdd] tag#7 uas_eh_abort_handler 0 uas-tag 8 inflight: CMD OUT
[ 644.408109] sd 2:0:0:2: [sdd] tag#7 CDB: opcode=0x8a 8a 00 00 00 00 00 5f 1e c9 68 00 00 04 00 00 00
[ 644.408149] sd 2:0:0:2: [sdd] tag#11 uas_eh_abort_handler 0 uas-tag 12 inflight: CMD OUT
[ 644.408154] sd 2:0:0:2: [sdd] tag#11 CDB: opcode=0x8a 8a 00 00 00 00 00 5f 1e cd 68 00 00 04 00 00 00
[ 644.408211] sd 2:0:0:2: [sdd] tag#8 uas_eh_abort_handler 0 uas-tag 9 inflight: CMD OUT
[ 644.408218] sd 2:0:0:2: [sdd] tag#8 CDB: opcode=0x8a 8a 00 00 00 00 00 5f 1e d1 68 00 00 04 00 00 00
[ 644.408256] sd 2:0:0:2: [sdd] tag#9 uas_eh_abort_handler 0 uas-tag 10 inflight: CMD OUT
[ 644.408261] sd 2:0:0:2: [sdd] tag#9 CDB: opcode=0x8a 8a 00 00 00 00 00 5f 1e d5 68 00 00 04 00 00 00
[ 644.408455] sd 2:0:0:2: [sdd] tag#1 uas_eh_abort_handler 0 uas-tag 2 inflight: CMD OUT
[ 644.408461] sd 2:0:0:2: [sdd] tag#1 CDB: opcode=0x8a 8a 00 00 00 00 00 5f 1e d9 68 00 00 04 00 00 00
[ 644.408499] sd 2:0:0:2: [sdd] tag#2 uas_eh_abort_handler 0 uas-tag 3 inflight: CMD OUT
[ 644.408505] sd 2:0:0:2: [sdd] tag#2 CDB: opcode=0x8a 8a 00 00 00 00 00 5f 1e dd 68 00 00 04 00 00 00
[ 644.408578] scsi host2: uas_eh_bus_reset_handler start
[ 644.514941] usb 2-1: reset SuperSpeed USB device number 2 using xhci_hcd
[ 644.532829] scsi host2: uas_eh_bus_reset_handler success
[ 648.913156] xhci_hcd 0000:00:14.0: ERROR Transfer event for disabled endpoint or incorrect stream ring
[ 648.913165] xhci_hcd 0000:00:14.0: @0000000002a42c40 00000000 00000000 04000000 03088001
[ 679.393004] sd 2:0:0:2: [sdd] tag#3 uas_eh_abort_handler 0 uas-tag 4 inflight: CMD OUT
[ 679.393018] sd 2:0:0:2: [sdd] tag#3 CDB: opcode=0x8a 8a 00 00 00 00 00 66 f9 86 28 00 00 04 00 00 00
[ 679.393451] sd 2:0:0:2: [sdd] tag#4 uas_eh_abort_handler 0 uas-tag 5 inflight: CMD OUT
[ 679.393464] sd 2:0:0:2: [sdd] tag#4 CDB: opcode=0x8a 8a 00 00 00 00 00 66 f9 8a 28 00 00 04 00 00 00
[ 679.393521] sd 2:0:0:2: [sdd] tag#0 uas_eh_abort_handler 0 uas-tag 1 inflight: CMD OUT
[ 679.393530] sd 2:0:0:2: [sdd] tag#0 CDB: opcode=0x8a 8a 00 00 00 00 00 66 f9 8e 28 00 00 04 00 00 00
[ 679.393674] sd 2:0:0:2: [sdd] tag#1 uas_eh_abort_handler 0 uas-tag 2 inflight: CMD OUT
[ 679.393681] sd 2:0:0:2: [sdd] tag#1 CDB: opcode=0x8a 8a 00 00 00 00 00 66 f9 92 28 00 00 04 00 00 00
[ 679.393722] sd 2:0:0:2: [sdd] tag#2 uas_eh_abort_handler 0 uas-tag 3 inflight: CMD OUT
[ 679.393728] sd 2:0:0:2: [sdd] tag#2 CDB: opcode=0x8a 8a 00 00 00 00 00 66 f9 96 28 00 00 04 00 00 00
[ 679.393767] sd 2:0:0:2: [sdd] tag#5 uas_eh_abort_handler 0 uas-tag 6 inflight: CMD OUT
[ 679.393773] sd 2:0:0:2: [sdd] tag#5 CDB: opcode=0x8a 8a 00 00 00 00 00 66 f9 9a 28 00 00 04 00 00 00
[ 679.393808] sd 2:0:0:2: [sdd] tag#6 uas_eh_abort_handler 0 uas-tag 7 inflight: CMD OUT
[ 679.393813] sd 2:0:0:2: [sdd] tag#6 CDB: opcode=0x8a 8a 00 00 00 00 00 66 f9 9e 28 00 00 04 00 00 00
[ 679.393924] scsi host2: uas_eh_bus_reset_handler start
[ 679.500295] usb 2-1: reset SuperSpeed USB device number 2 using xhci_hcd
[ 679.517934] scsi host2: uas_eh_bus_reset_handler success
[ 693.223285] xhci_hcd 0000:00:14.0: ERROR Transfer event for disabled endpoint or incorrect stream ring
[ 693.223295] xhci_hcd 0000:00:14.0: @0000000002a42df0 00000000 00000000 04000000 03088000
[ 723.338315] sd 2:0:0:2: [sdd] tag#9 uas_eh_abort_handler 0 uas-tag 10 inflight: CMD OUT
[ 723.338328] sd 2:0:0:2: [sdd] tag#9 CDB: opcode=0x8a 8a 00 00 00 00 00 7e e1 2e a8 00 00 04 00 00 00
[ 723.338445] sd 2:0:0:2: [sdd] tag#10 uas_eh_abort_handler 0 uas-tag 11 inflight: CMD OUT
[ 723.338451] sd 2:0:0:2: [sdd] tag#10 CDB: opcode=0x8a 8a 00 00 00 00 00 7e e1 32 a8 00 00 04 00 00 00
[ 723.338491] sd 2:0:0:2: [sdd] tag#11 uas_eh_abort_handler 0 uas-tag 12 inflight: CMD OUT
[ 723.338497] sd 2:0:0:2: [sdd] tag#11 CDB: opcode=0x8a 8a 00 00 00 00 00 7e e1 36 a8 00 00 04 00 00 00
[ 723.338684] sd 2:0:0:2: [sdd] tag#0 uas_eh_abort_handler 0 uas-tag 1 inflight: CMD OUT
[ 723.338700] sd 2:0:0:2: [sdd] tag#0 CDB: opcode=0x8a 8a 00 00 00 00 00 7e e1 3a a8 00 00 04 00 00 00
[ 723.338763] sd 2:0:0:2: [sdd] tag#1 uas_eh_abort_handler 0 uas-tag 2 inflight: CMD OUT
[ 723.338771] sd 2:0:0:2: [sdd] tag#1 CDB: opcode=0x8a 8a 00 00 00 00 00 7e e1 3e a8 00 00 04 00 00 00
[ 723.338829] sd 2:0:0:2: [sdd] tag#2 uas_eh_abort_handler 0 uas-tag 3 inflight: CMD OUT
[ 723.338836] sd 2:0:0:2: [sdd] tag#2 CDB: opcode=0x8a 8a 00 00 00 00 00 7e e1 42 a8 00 00 04 00 00 00
[ 723.338873] sd 2:0:0:2: [sdd] tag#3 uas_eh_abort_handler 0 uas-tag 4 inflight: CMD OUT
[ 723.338879] sd 2:0:0:2: [sdd] tag#3 CDB: opcode=0x8a 8a 00 00 00 00 00 7e e1 46 a8 00 00 04 00 00 00
[ 723.339065] sd 2:0:0:2: [sdd] tag#4 uas_eh_abort_handler 0 uas-tag 5 inflight: CMD OUT
[ 723.339074] sd 2:0:0:2: [sdd] tag#4 CDB: opcode=0x8a 8a 00 00 00 00 00 7e e1 4a a8 00 00 04 00 00 00
[ 723.339121] sd 2:0:0:2: [sdd] tag#5 uas_eh_abort_handler 0 uas-tag 6 inflight: CMD OUT
[ 723.339129] sd 2:0:0:2: [sdd] tag#5 CDB: opcode=0x8a 8a 00 00 00 00 00 7e e1 4e a8 00 00 04 00 00 00
[ 723.339185] sd 2:0:0:2: [sdd] tag#6 uas_eh_abort_handler 0 uas-tag 7 inflight: CMD OUT
[ 723.339192] sd 2:0:0:2: [sdd] tag#6 CDB: opcode=0x8a 8a 00 00 00 00 00 7e e1 52 a8 00 00 04 00 00 00
[ 723.339232] sd 2:0:0:2: [sdd] tag#7 uas_eh_abort_handler 0 uas-tag 8 inflight: CMD OUT
[ 723.339237] sd 2:0:0:2: [sdd] tag#7 CDB: opcode=0x8a 8a 00 00 00 00 00 7e e1 56 a8 00 00 04 00 00 00
[ 723.339443] sd 2:0:0:2: [sdd] tag#8 uas_eh_abort_handler 0 uas-tag 9 inflight: CMD OUT
[ 723.339450] sd 2:0:0:2: [sdd] tag#8 CDB: opcode=0x8a 8a 00 00 00 00 00 7e e1 5a a8 00 00 04 00 00 00
[ 723.339581] scsi host2: uas_eh_bus_reset_handler start
[ 723.445329] usb 2-1: reset SuperSpeed USB device number 2 using xhci_hcd
[ 723.461179] scsi host2: uas_eh_bus_reset_handler success
[ 734.588156] xhci_hcd 0000:00:14.0: ERROR Transfer event for disabled endpoint or incorrect stream ring
[ 734.588165] xhci_hcd 0000:00:14.0: @0000000002a42c10 00000000 00000000 04000000 03088000
[ 759.587948] perf interrupt took too long (2501 > 2495), lowering kernel.perf_event_max_sample_rate to 50100
[ 765.363545] sd 2:0:0:2: [sdd] tag#9 uas_eh_abort_handler 0 uas-tag 10 inflight: CMD OUT
[ 765.363559] sd 2:0:0:2: [sdd] tag#9 CDB: opcode=0x8a 8a 00 00 00 00 00 ab 34 df f0 00 00 04 00 00 00
[ 765.363635] sd 2:0:0:2: [sdd] tag#10 uas_eh_abort_handler 0 uas-tag 11 inflight: CMD OUT
[ 765.363642] sd 2:0:0:2: [sdd] tag#10 CDB: opcode=0x8a 8a 00 00 00 00 00 ab 34 e3 f0 00 00 04 00 00 00
[ 765.363969] sd 2:0:0:2: [sdd] tag#11 uas_eh_abort_handler 0 uas-tag 12 inflight: CMD OUT
[ 765.363982] sd 2:0:0:2: [sdd] tag#11 CDB: opcode=0x8a 8a 00 00 00 00 00 ab 34 e7 f0 00 00 04 00 00 00
[ 765.364034] sd 2:0:0:2: [sdd] tag#0 uas_eh_abort_handler 0 uas-tag 1 inflight: CMD OUT
[ 765.364041] sd 2:0:0:2: [sdd] tag#0 CDB: opcode=0x8a 8a 00 00 00 00 00 ab 34 eb f0 00 00 04 00 00 00
[ 765.364163] sd 2:0:0:2: [sdd] tag#1 uas_eh_abort_handler 0 uas-tag 2 inflight: CMD OUT
[ 765.364171] sd 2:0:0:2: [sdd] tag#1 CDB: opcode=0x8a 8a 00 00 00 00 00 ab 34 ef f0 00 00 04 00 00 00
[ 765.364211] sd 2:0:0:2: [sdd] tag#2 uas_eh_abort_handler 0 uas-tag 3 inflight: CMD OUT
[ 765.364218] sd 2:0:0:2: [sdd] tag#2 CDB: opcode=0x8a 8a 00 00 00 00 00 ab 34 f3 f0 00 00 04 00 00 00
[ 765.364497] sd 2:0:0:2: [sdd] tag#3 uas_eh_abort_handler 0 uas-tag 4 inflight: CMD OUT
[ 765.364509] sd 2:0:0:2: [sdd] tag#3 CDB: opcode=0x8a 8a 00 00 00 00 00 ab 34 f7 f0 00 00 04 00 00 00
[ 765.364561] sd 2:0:0:2: [sdd] tag#4 uas_eh_abort_handler 0 uas-tag 5 inflight: CMD OUT
[ 765.364569] sd 2:0:0:2: [sdd] tag#4 CDB: opcode=0x8a 8a 00 00 00 00 00 ab 34 fb f0 00 00 04 00 00 00
[ 765.364705] sd 2:0:0:2: [sdd] tag#5 uas_eh_abort_handler 0 uas-tag 6 inflight: CMD OUT
[ 765.364713] sd 2:0:0:2: [sdd] tag#5 CDB: opcode=0x8a 8a 00 00 00 00 00 ab 34 ff f0 00 00 04 00 00 00
[ 765.364753] sd 2:0:0:2: [sdd] tag#6 uas_eh_abort_handler 0 uas-tag 7 inflight: CMD OUT
[ 765.364760] sd 2:0:0:2: [sdd] tag#6 CDB: opcode=0x8a 8a 00 00 00 00 00 ab 35 03 f0 00 00 04 00 00 00
[ 765.364893] sd 2:0:0:2: [sdd] tag#7 uas_eh_abort_handler 0 uas-tag 8 inflight: CMD OUT
[ 765.364902] sd 2:0:0:2: [sdd] tag#7 CDB: opcode=0x8a 8a 00 00 00 00 00 ab 35 07 f0 00 00 04 00 00 00
[ 765.364948] sd 2:0:0:2: [sdd] tag#8 uas_eh_abort_handler 0 uas-tag 9 inflight: CMD OUT
[ 765.364955] sd 2:0:0:2: [sdd] tag#8 CDB: opcode=0x8a 8a 00 00 00 00 00 ab 35 0b f0 00 00 04 00 00 00
[ 765.365017] scsi host2: uas_eh_bus_reset_handler start
[ 765.470562] usb 2-1: reset SuperSpeed USB device number 2 using xhci_hcd
[ 765.485794] scsi host2: uas_eh_bus_reset_handler success
[ 769.864279] xhci_hcd 0000:00:14.0: ERROR Transfer event for disabled endpoint or incorrect stream ring
[ 769.864289] xhci_hcd 0000:00:14.0: @0000000002a42420 00000000 00000000 04000000 03088000
[ 800.349042] sd 2:0:0:2: [sdd] tag#0 uas_eh_abort_handler 0 uas-tag 1 inflight: CMD OUT
[ 800.349052] sd 2:0:0:2: [sdd] tag#0 CDB: opcode=0x8a 8a 00 00 00 00 00 ab 38 37 f0 00 00 04 00 00 00
[ 800.349111] sd 2:0:0:3: [sde] tag#1 uas_eh_abort_handler 0 uas-tag 3 inflight: CMD IN
[ 800.349117] sd 2:0:0:3: [sde] tag#1 CDB: opcode=0x88 88 00 00 00 00 00 00 6c 64 18 00 00 00 08 00 00
[ 800.349163] sd 2:0:0:2: [sdd] tag#6 uas_eh_abort_handler 0 uas-tag 7 inflight: CMD OUT
[ 800.349169] sd 2:0:0:2: [sdd] tag#6 CDB: opcode=0x8a 8a 00 00 00 00 00 ab 38 3b f0 00 00 04 00 00 00
[ 800.349216] sd 2:0:0:3: [sde] tag#9 uas_eh_abort_handler 0 uas-tag 10 inflight: CMD IN
[ 800.349221] sd 2:0:0:3: [sde] tag#9 CDB: opcode=0x88 88 00 00 00 00 00 00 6c 64 30 00 00 00 08 00 00
[ 800.349257] sd 2:0:0:2: [sdd] tag#4 uas_eh_abort_handler 0 uas-tag 5 inflight: CMD OUT
[ 800.349263] sd 2:0:0:2: [sdd] tag#4 CDB: opcode=0x8a 8a 00 00 00 00 00 ab 38 3f f0 00 00 04 00 00 00
[ 800.349302] sd 2:0:0:3: [sde] tag#10 uas_eh_abort_handler 0 uas-tag 11 inflight: CMD IN
[ 800.349308] sd 2:0:0:3: [sde] tag#10 CDB: opcode=0x88 88 00 00 00 00 00 00 6c 64 58 00 00 00 08 00 00
[ 800.349386] sd 2:0:0:2: [sdd] tag#3 uas_eh_abort_handler 0 uas-tag 4 inflight: CMD OUT
[ 800.349392] sd 2:0:0:2: [sdd] tag#3 CDB: opcode=0x8a 8a 00 00 00 00 00 ab 38 43 f0 00 00 04 00 00 00
[ 800.349427] sd 2:0:0:2: [sdd] tag#8 uas_eh_abort_handler 0 uas-tag 9 inflight: CMD OUT
[ 800.349433] sd 2:0:0:2: [sdd] tag#8 CDB: opcode=0x8a 8a 00 00 00 00 00 ab 38 47 f0 00 00 04 00 00 00
[ 800.349472] sd 2:0:0:2: [sdd] tag#5 uas_eh_abort_handler 0 uas-tag 6 inflight: CMD OUT
[ 800.349477] sd 2:0:0:2: [sdd] tag#5 CDB: opcode=0x8a 8a 00 00 00 00 00 ab 38 4b f0 00 00 04 00 00 00
[ 800.349517] sd 2:0:0:2: [sdd] tag#7 uas_eh_abort_handler 0 uas-tag 8 inflight: CMD OUT
[ 800.349522] sd 2:0:0:2: [sdd] tag#7 CDB: opcode=0x8a 8a 00 00 00 00 00 ab 38 4f f0 00 00 04 00 00 00
[ 800.349557] sd 2:0:0:2: [sdd] tag#2 uas_eh_abort_handler 0 uas-tag 2 inflight: CMD OUT
[ 800.349562] sd 2:0:0:2: [sdd] tag#2 CDB: opcode=0x8a 8a 00 00 00 00 00 ab 38 53 f0 00 00 04 00 00 00
[ 800.349626] scsi host2: uas_eh_bus_reset_handler start
[ 800.456007] usb 2-1: reset SuperSpeed USB device number 2 using xhci_hcd
[ 800.471210] scsi host2: uas_eh_bus_reset_handler success
[ 821.978693] xhci_hcd 0000:00:14.0: ERROR Transfer event for disabled endpoint or incorrect stream ring
[ 821.978703] xhci_hcd 0000:00:14.0: @0000000002a42c50 00000000 00000000 04000000 03088000
[ 852.404027] sd 2:0:0:2: [sdd] tag#0 uas_eh_abort_handler 0 uas-tag 1 inflight: CMD OUT
[ 852.404037] sd 2:0:0:2: [sdd] tag#0 CDB: opcode=0x8a 8a 00 00 00 00 00 ab 5a bb e8 00 00 04 00 00 00
[ 852.404104] sd 2:0:0:2: [sdd] tag#1 uas_eh_abort_handler 0 uas-tag 2 inflight: CMD OUT
[ 852.404109] sd 2:0:0:2: [sdd] tag#1 CDB: opcode=0x8a 8a 00 00 00 00 00 ab 5a bf e8 00 00 04 00 00 00
[ 852.404145] sd 2:0:0:2: [sdd] tag#2 uas_eh_abort_handler 0 uas-tag 3 inflight: CMD OUT
[ 852.404151] sd 2:0:0:2: [sdd] tag#2 CDB: opcode=0x8a 8a 00 00 00 00 00 ab 5a c3 e8 00 00 04 00 00 00
[ 852.404198] sd 2:0:0:2: [sdd] tag#3 uas_eh_abort_handler 0 uas-tag 4 inflight: CMD OUT
[ 852.404203] sd 2:0:0:2: [sdd] tag#3 CDB: opcode=0x8a 8a 00 00 00 00 00 ab 5a c7 e8 00 00 04 00 00 00
[ 852.404244] sd 2:0:0:2: [sdd] tag#4 uas_eh_abort_handler 0 uas-tag 5 inflight: CMD OUT
[ 852.404250] sd 2:0:0:2: [sdd] tag#4 CDB: opcode=0x8a 8a 00 00 00 00 00 ab 5a cb e8 00 00 04 00 00 00
[ 852.404288] sd 2:0:0:2: [sdd] tag#5 uas_eh_abort_handler 0 uas-tag 6 inflight: CMD OUT
[ 852.404293] sd 2:0:0:2: [sdd] tag#5 CDB: opcode=0x8a 8a 00 00 00 00 00 ab 5a cf e8 00 00 04 00 00 00
[ 852.404328] sd 2:0:0:2: [sdd] tag#6 uas_eh_abort_handler 0 uas-tag 7 inflight: CMD OUT
[ 852.404333] sd 2:0:0:2: [sdd] tag#6 CDB: opcode=0x8a 8a 00 00 00 00 00 ab 5a d3 e8 00 00 04 00 00 00
[ 852.404373] sd 2:0:0:2: [sdd] tag#7 uas_eh_abort_handler 0 uas-tag 8 inflight: CMD OUT
[ 852.404379] sd 2:0:0:2: [sdd] tag#7 CDB: opcode=0x8a 8a 00 00 00 00 00 ab 5a d7 e8 00 00 04 00 00 00
[ 852.404418] sd 2:0:0:2: [sdd] tag#8 uas_eh_abort_handler 0 uas-tag 9 inflight: CMD OUT
[ 852.404423] sd 2:0:0:2: [sdd] tag#8 CDB: opcode=0x8a 8a 00 00 00 00 00 ab 5a db e8 00 00 04 00 00 00
[ 852.404460] sd 2:0:0:2: [sdd] tag#9 uas_eh_abort_handler 0 uas-tag 10 inflight: CMD OUT
[ 852.404465] sd 2:0:0:2: [sdd] tag#9 CDB: opcode=0x8a 8a 00 00 00 00 00 ab 5a df e8 00 00 04 00 00 00
[ 852.404499] sd 2:0:0:2: [sdd] tag#10 uas_eh_abort_handler 0 uas-tag 11 inflight: CMD OUT
[ 852.404504] sd 2:0:0:2: [sdd] tag#10 CDB: opcode=0x8a 8a 00 00 00 00 00 ab 5a e3 e8 00 00 04 00 00 00
[ 852.404544] sd 2:0:0:2: [sdd] tag#11 uas_eh_abort_handler 0 uas-tag 12 inflight: CMD OUT
[ 852.404550] sd 2:0:0:2: [sdd] tag#11 CDB: opcode=0x8a 8a 00 00 00 00 00 ab 5a e7 e8 00 00 04 00 00 00
[ 852.404599] scsi host2: uas_eh_bus_reset_handler start
[ 852.511049] usb 2-1: reset SuperSpeed USB device number 2 using xhci_hcd
[ 852.526896] scsi host2: uas_eh_bus_reset_handler success
[ 859.851282] xhci_hcd 0000:00:14.0: ERROR Transfer event for disabled endpoint or incorrect stream ring
[ 859.851292] xhci_hcd 0000:00:14.0: @0000000002a42c60 00000000 00000000 04000000 03088000
[ 890.372809] sd 2:0:0:2: [sdd] tag#1 uas_eh_abort_handler 0 uas-tag 2 inflight: CMD OUT
[ 890.372821] sd 2:0:0:2: [sdd] tag#1 CDB: opcode=0x8a 8a 00 00 00 00 00 ab 6a 43 e8 00 00 04 00 00 00
[ 890.373215] sd 2:0:0:2: [sdd] tag#2 uas_eh_abort_handler 0 uas-tag 3 inflight: CMD OUT
[ 890.373231] sd 2:0:0:2: [sdd] tag#2 CDB: opcode=0x8a 8a 00 00 00 00 00 ab 6a 47 e8 00 00 04 00 00 00
[ 890.373293] sd 2:0:0:2: [sdd] tag#3 uas_eh_abort_handler 0 uas-tag 4 inflight: CMD OUT
[ 890.373301] sd 2:0:0:2: [sdd] tag#3 CDB: opcode=0x8a 8a 00 00 00 00 00 ab 6a 4b e8 00 00 04 00 00 00
[ 890.373368] sd 2:0:0:2: [sdd] tag#4 uas_eh_abort_handler 0 uas-tag 5 inflight: CMD OUT
[ 890.373375] sd 2:0:0:2: [sdd] tag#4 CDB: opcode=0x8a 8a 00 00 00 00 00 ab 6a 4f e8 00 00 04 00 00 00
[ 890.373413] sd 2:0:0:2: [sdd] tag#5 uas_eh_abort_handler 0 uas-tag 6 inflight: CMD OUT
[ 890.373419] sd 2:0:0:2: [sdd] tag#5 CDB: opcode=0x8a 8a 00 00 00 00 00 ab 6a 53 e8 00 00 04 00 00 00
[ 890.373632] sd 2:0:0:2: [sdd] tag#6 uas_eh_abort_handler 0 uas-tag 7 inflight: CMD OUT
[ 890.373641] sd 2:0:0:2: [sdd] tag#6 CDB: opcode=0x8a 8a 00 00 00 00 00 ab 6a 57 e8 00 00 04 00 00 00
[ 890.373689] sd 2:0:0:2: [sdd] tag#11 uas_eh_abort_handler 0 uas-tag 12 inflight: CMD OUT
[ 890.373696] sd 2:0:0:2: [sdd] tag#11 CDB: opcode=0x8a 8a 00 00 00 00 00 ab 6a 5b e8 00 00 04 00 00 00
[ 890.373751] sd 2:0:0:2: [sdd] tag#7 uas_eh_abort_handler 0 uas-tag 8 inflight: CMD OUT
[ 890.373758] sd 2:0:0:2: [sdd] tag#7 CDB: opcode=0x8a 8a 00 00 00 00 00 ab 6a 5f e8 00 00 04 00 00 00
[ 890.373796] sd 2:0:0:2: [sdd] tag#8 uas_eh_abort_handler 0 uas-tag 9 inflight: CMD OUT
[ 890.373801] sd 2:0:0:2: [sdd] tag#8 CDB: opcode=0x8a 8a 00 00 00 00 00 ab 6a 63 e8 00 00 04 00 00 00
[ 890.373959] sd 2:0:0:2: [sdd] tag#9 uas_eh_abort_handler 0 uas-tag 10 inflight: CMD OUT
[ 890.373969] sd 2:0:0:2: [sdd] tag#9 CDB: opcode=0x8a 8a 00 00 00 00 00 ab 6a 67 e8 00 00 04 00 00 00
[ 890.374023] sd 2:0:0:2: [sdd] tag#10 uas_eh_abort_handler 0 uas-tag 11 inflight: CMD OUT
[ 890.374029] sd 2:0:0:2: [sdd] tag#10 CDB: opcode=0x8a 8a 00 00 00 00 00 ab 6a 6b e8 00 00 04 00 00 00
[ 890.374080] sd 2:0:0:2: [sdd] tag#0 uas_eh_abort_handler 0 uas-tag 1 inflight: CMD OUT
[ 890.374086] sd 2:0:0:2: [sdd] tag#0 CDB: opcode=0x8a 8a 00 00 00 00 00 ab 6a 6f e8 00 00 04 00 00 00
[ 890.374400] scsi host2: uas_eh_bus_reset_handler start
[ 890.480071] usb 2-1: reset SuperSpeed USB device number 2 using xhci_hcd
[ 890.496402] scsi host2: uas_eh_bus_reset_handler success
[ 905.907673] xhci_hcd 0000:00:14.0: ERROR Transfer event for disabled endpoint or incorrect stream ring
[ 905.907686] xhci_hcd 0000:00:14.0: @0000000002a42c60 00000000 00000000 04000000 03088001
[ 936.344606] sd 2:0:0:2: [sdd] tag#4 uas_eh_abort_handler 0 uas-tag 5 inflight: CMD OUT
[ 936.344615] sd 2:0:0:2: [sdd] tag#4 CDB: opcode=0x8a 8a 00 00 00 00 00 ab 8a ba 58 00 00 04 00 00 00
[ 936.344670] sd 2:0:0:2: [sdd] tag#5 uas_eh_abort_handler 0 uas-tag 6 inflight: CMD OUT
[ 936.344676] sd 2:0:0:2: [sdd] tag#5 CDB: opcode=0x8a 8a 00 00 00 00 00 ab 8a be 58 00 00 04 00 00 00
[ 936.345097] sd 2:0:0:2: [sdd] tag#6 uas_eh_abort_handler 0 uas-tag 7 inflight: CMD OUT
[ 936.345109] sd 2:0:0:2: [sdd] tag#6 CDB: opcode=0x8a 8a 00 00 00 00 00 ab 8a c2 58 00 00 04 00 00 00
[ 936.345160] sd 2:0:0:2: [sdd] tag#7 uas_eh_abort_handler 0 uas-tag 8 inflight: CMD OUT
[ 936.345168] sd 2:0:0:2: [sdd] tag#7 CDB: opcode=0x8a 8a 00 00 00 00 00 ab 8a c6 58 00 00 04 00 00 00
[ 936.345284] sd 2:0:0:2: [sdd] tag#8 uas_eh_abort_handler 0 uas-tag 9 inflight: CMD OUT
[ 936.345291] sd 2:0:0:2: [sdd] tag#8 CDB: opcode=0x8a 8a 00 00 00 00 00 ab 8a ca 58 00 00 04 00 00 00
[ 936.345329] sd 2:0:0:2: [sdd] tag#9 uas_eh_abort_handler 0 uas-tag 10 inflight: CMD OUT
[ 936.345334] sd 2:0:0:2: [sdd] tag#9 CDB: opcode=0x8a 8a 00 00 00 00 00 ab 8a ce 58 00 00 04 00 00 00
[ 936.345621] sd 2:0:0:2: [sdd] tag#10 uas_eh_abort_handler 0 uas-tag 11 inflight: CMD OUT
[ 936.345634] sd 2:0:0:2: [sdd] tag#10 CDB: opcode=0x8a 8a 00 00 00 00 00 ab 8a d2 58 00 00 04 00 00 00
[ 936.345689] sd 2:0:0:2: [sdd] tag#11 uas_eh_abort_handler 0 uas-tag 12 inflight: CMD OUT
[ 936.345696] sd 2:0:0:2: [sdd] tag#11 CDB: opcode=0x8a 8a 00 00 00 00 00 ab 8a d6 58 00 00 04 00 00 00
[ 936.345743] sd 2:0:0:2: [sdd] tag#0 uas_eh_abort_handler 0 uas-tag 1 inflight: CMD OUT
[ 936.345749] sd 2:0:0:2: [sdd] tag#0 CDB: opcode=0x8a 8a 00 00 00 00 00 ab 8a da 58 00 00 04 00 00 00
[ 936.345788] sd 2:0:0:2: [sdd] tag#1 uas_eh_abort_handler 0 uas-tag 2 inflight: CMD OUT
[ 936.345793] sd 2:0:0:2: [sdd] tag#1 CDB: opcode=0x8a 8a 00 00 00 00 00 ab 8a de 58 00 00 04 00 00 00
[ 936.345963] sd 2:0:0:2: [sdd] tag#2 uas_eh_abort_handler 0 uas-tag 3 inflight: CMD OUT
[ 936.345972] sd 2:0:0:2: [sdd] tag#2 CDB: opcode=0x8a 8a 00 00 00 00 00 ab 8a e2 58 00 00 04 00 00 00
[ 936.346017] sd 2:0:0:2: [sdd] tag#3 uas_eh_abort_handler 0 uas-tag 4 inflight: CMD OUT
[ 936.346024] sd 2:0:0:2: [sdd] tag#3 CDB: opcode=0x8a 8a 00 00 00 00 00 ab 8a e6 58 00 00 04 00 00 00
[ 936.346157] scsi host2: uas_eh_bus_reset_handler start
[ 936.451837] usb 2-1: reset SuperSpeed USB device number 2 using xhci_hcd
[ 936.467626] scsi host2: uas_eh_bus_reset_handler success
[ 987.824537] xhci_hcd 0000:00:14.0: ERROR Transfer event for disabled endpoint or incorrect stream ring
[ 987.824550] xhci_hcd 0000:00:14.0: @0000000002a42fc0 00000000 00000000 04000000 03088001
[ 1018.368591] sd 2:0:0:2: [sdd] tag#8 uas_eh_abort_handler 0 uas-tag 9 inflight: CMD OUT
[ 1018.368601] sd 2:0:0:2: [sdd] tag#8 CDB: opcode=0x8a 8a 00 00 00 00 00 ac 17 a0 c0 00 00 04 00 00 00
[ 1018.368656] sd 2:0:0:2: [sdd] tag#9 uas_eh_abort_handler 0 uas-tag 10 inflight: CMD OUT
[ 1018.368661] sd 2:0:0:2: [sdd] tag#9 CDB: opcode=0x8a 8a 00 00 00 00 00 ac 17 a4 c0 00 00 04 00 00 00
[ 1018.368920] sd 2:0:0:2: [sdd] tag#10 uas_eh_abort_handler 0 uas-tag 11 inflight: CMD OUT
[ 1018.368928] sd 2:0:0:2: [sdd] tag#10 CDB: opcode=0x8a 8a 00 00 00 00 00 ac 17 a8 c0 00 00 04 00 00 00
[ 1018.369089] sd 2:0:0:2: [sdd] tag#0 uas_eh_abort_handler 0 uas-tag 1 inflight: CMD OUT
[ 1018.369095] sd 2:0:0:2: [sdd] tag#0 CDB: opcode=0x8a 8a 00 00 00 00 00 ac 17 ac c0 00 00 04 00 00 00
[ 1018.369145] sd 2:0:0:2: [sdd] tag#11 uas_eh_abort_handler 0 uas-tag 2 inflight: CMD OUT
[ 1018.369150] sd 2:0:0:2: [sdd] tag#11 CDB: opcode=0x8a 8a 00 00 00 00 00 ac 17 b0 c0 00 00 04 00 00 00
[ 1018.369186] sd 2:0:0:2: [sdd] tag#1 uas_eh_abort_handler 0 uas-tag 12 inflight: CMD OUT
[ 1018.369191] sd 2:0:0:2: [sdd] tag#1 CDB: opcode=0x8a 8a 00 00 00 00 00 ac 17 b4 c0 00 00 04 00 00 00
[ 1018.369453] sd 2:0:0:2: [sdd] tag#2 uas_eh_abort_handler 0 uas-tag 3 inflight: CMD OUT
[ 1018.369460] sd 2:0:0:2: [sdd] tag#2 CDB: opcode=0x8a 8a 00 00 00 00 00 ac 17 b8 c0 00 00 04 00 00 00
[ 1018.369547] sd 2:0:0:2: [sdd] tag#3 uas_eh_abort_handler 0 uas-tag 4 inflight: CMD OUT
[ 1018.369553] sd 2:0:0:2: [sdd] tag#3 CDB: opcode=0x8a 8a 00 00 00 00 00 ac 17 bc c0 00 00 04 00 00 00
[ 1018.369596] sd 2:0:0:2: [sdd] tag#4 uas_eh_abort_handler 0 uas-tag 5 inflight: CMD OUT
[ 1018.369602] sd 2:0:0:2: [sdd] tag#4 CDB: opcode=0x8a 8a 00 00 00 00 00 ac 17 c0 c0 00 00 04 00 00 00
[ 1018.369636] sd 2:0:0:2: [sdd] tag#5 uas_eh_abort_handler 0 uas-tag 6 inflight: CMD OUT
[ 1018.369642] sd 2:0:0:2: [sdd] tag#5 CDB: opcode=0x8a 8a 00 00 00 00 00 ac 17 c4 c0 00 00 04 00 00 00
[ 1018.369946] sd 2:0:0:2: [sdd] tag#6 uas_eh_abort_handler 0 uas-tag 7 inflight: CMD OUT
[ 1018.369952] sd 2:0:0:2: [sdd] tag#6 CDB: opcode=0x8a 8a 00 00 00 00 00 ac 17 c8 c0 00 00 04 00 00 00
[ 1018.370008] sd 2:0:0:2: [sdd] tag#7 uas_eh_abort_handler 0 uas-tag 8 inflight: CMD OUT
[ 1018.370014] sd 2:0:0:2: [sdd] tag#7 CDB: opcode=0x8a 8a 00 00 00 00 00 ac 17 cc c0 00 00 04 00 00 00
[ 1018.370060] scsi host2: uas_eh_bus_reset_handler start
[ 1018.475883] usb 2-1: reset SuperSpeed USB device number 2 using xhci_hcd
[ 1018.492749] scsi host2: uas_eh_bus_reset_handler success
[ 1034.906789] xhci_hcd 0000:00:14.0: ERROR Transfer event for disabled endpoint or incorrect stream ring
[ 1034.906800] xhci_hcd 0000:00:14.0: @0000000002a421b0 00000000 00000000 04000000 03088001
[ 1065.415335] sd 2:0:0:2: [sdd] tag#11 uas_eh_abort_handler 0 uas-tag 12 inflight: CMD OUT
[ 1065.415349] sd 2:0:0:2: [sdd] tag#11 CDB: opcode=0x8a 8a 00 00 00 00 00 bb 1a 02 00 00 00 04 00 00 00
[ 1065.415984] sd 2:0:0:2: [sdd] tag#0 uas_eh_abort_handler 0 uas-tag 1 inflight: CMD OUT
[ 1065.415996] sd 2:0:0:2: [sdd] tag#0 CDB: opcode=0x8a 8a 00 00 00 00 00 bb 1a 06 00 00 00 04 00 00 00
[ 1065.416144] sd 2:0:0:2: [sdd] tag#1 uas_eh_abort_handler 0 uas-tag 2 inflight: CMD OUT
[ 1065.416151] sd 2:0:0:2: [sdd] tag#1 CDB: opcode=0x8a 8a 00 00 00 00 00 bb 1a 0a 00 00 00 04 00 00 00
[ 1065.416243] sd 2:0:0:2: [sdd] tag#2 uas_eh_abort_handler 0 uas-tag 3 inflight: CMD OUT
[ 1065.416251] sd 2:0:0:2: [sdd] tag#2 CDB: opcode=0x8a 8a 00 00 00 00 00 bb 1a 0e 00 00 00 04 00 00 00
[ 1065.416312] sd 2:0:0:2: [sdd] tag#3 uas_eh_abort_handler 0 uas-tag 4 inflight: CMD OUT
[ 1065.416321] sd 2:0:0:2: [sdd] tag#3 CDB: opcode=0x8a 8a 00 00 00 00 00 bb 1a 12 00 00 00 04 00 00 00
[ 1065.416367] sd 2:0:0:2: [sdd] tag#4 uas_eh_abort_handler 0 uas-tag 5 inflight: CMD OUT
[ 1065.416374] sd 2:0:0:2: [sdd] tag#4 CDB: opcode=0x8a 8a 00 00 00 00 00 bb 1a 16 00 00 00 04 00 00 00
[ 1065.416526] sd 2:0:0:2: [sdd] tag#5 uas_eh_abort_handler 0 uas-tag 6 inflight: CMD OUT
[ 1065.416532] sd 2:0:0:2: [sdd] tag#5 CDB: opcode=0x8a 8a 00 00 00 00 00 bb 1a 1a 00 00 00 04 00 00 00
[ 1065.416585] sd 2:0:0:2: [sdd] tag#6 uas_eh_abort_handler 0 uas-tag 7 inflight: CMD OUT
[ 1065.416591] sd 2:0:0:2: [sdd] tag#6 CDB: opcode=0x8a 8a 00 00 00 00 00 bb 1a 1e 00 00 00 04 00 00 00
[ 1065.416628] sd 2:0:0:2: [sdd] tag#7 uas_eh_abort_handler 0 uas-tag 8 inflight: CMD OUT
[ 1065.416634] sd 2:0:0:2: [sdd] tag#7 CDB: opcode=0x8a 8a 00 00 00 00 00 bb 1a 22 00 00 00 04 00 00 00
[ 1065.416668] sd 2:0:0:2: [sdd] tag#8 uas_eh_abort_handler 0 uas-tag 9 inflight: CMD OUT
[ 1065.416674] sd 2:0:0:2: [sdd] tag#8 CDB: opcode=0x8a 8a 00 00 00 00 00 bb 1a 26 00 00 00 04 00 00 00
[ 1065.416918] sd 2:0:0:2: [sdd] tag#9 uas_eh_abort_handler 0 uas-tag 10 inflight: CMD OUT
[ 1065.416924] sd 2:0:0:2: [sdd] tag#9 CDB: opcode=0x8a 8a 00 00 00 00 00 bb 1a 2a 00 00 00 04 00 00 00
[ 1065.416982] sd 2:0:0:2: [sdd] tag#10 uas_eh_abort_handler 0 uas-tag 11 inflight: CMD OUT
[ 1065.416988] sd 2:0:0:2: [sdd] tag#10 CDB: opcode=0x8a 8a 00 00 00 00 00 bb 1a 2e 00 00 00 04 00 00 00
[ 1065.417035] scsi host2: uas_eh_bus_reset_handler start
[ 1065.522719] usb 2-1: reset SuperSpeed USB device number 2 using xhci_hcd
[ 1065.537626] scsi host2: uas_eh_bus_reset_handler success
[ 1075.145784] xhci_hcd 0000:00:14.0: ERROR Transfer event for disabled endpoint or incorrect stream ring
[ 1075.145793] xhci_hcd 0000:00:14.0: @0000000002a42070 00000000 00000000 04000000 03088001
[ 1105.333806] sd 2:0:0:2: [sdd] tag#1 uas_eh_abort_handler 0 uas-tag 2 inflight: CMD OUT
[ 1105.333816] sd 2:0:0:2: [sdd] tag#1 CDB: opcode=0x8a 8a 00 00 00 00 00 d2 fa 06 a8 00 00 04 00 00 00
[ 1105.334107] sd 2:0:0:2: [sdd] tag#2 uas_eh_abort_handler 0 uas-tag 3 inflight: CMD OUT
[ 1105.334120] sd 2:0:0:2: [sdd] tag#2 CDB: opcode=0x8a 8a 00 00 00 00 00 d2 fa 0a a8 00 00 04 00 00 00
[ 1105.334178] sd 2:0:0:2: [sdd] tag#3 uas_eh_abort_handler 0 uas-tag 4 inflight: CMD OUT
[ 1105.334185] sd 2:0:0:2: [sdd] tag#3 CDB: opcode=0x8a 8a 00 00 00 00 00 d2 fa 0e a8 00 00 04 00 00 00
[ 1105.334293] sd 2:0:0:2: [sdd] tag#4 uas_eh_abort_handler 0 uas-tag 5 inflight: CMD OUT
[ 1105.334302] sd 2:0:0:2: [sdd] tag#4 CDB: opcode=0x8a 8a 00 00 00 00 00 d2 fa 12 a8 00 00 04 00 00 00
[ 1105.334360] sd 2:0:0:2: [sdd] tag#5 uas_eh_abort_handler 0 uas-tag 6 inflight: CMD OUT
[ 1105.334367] sd 2:0:0:2: [sdd] tag#5 CDB: opcode=0x8a 8a 00 00 00 00 00 d2 fa 16 a8 00 00 04 00 00 00
[ 1105.334414] sd 2:0:0:2: [sdd] tag#6 uas_eh_abort_handler 0 uas-tag 7 inflight: CMD OUT
[ 1105.334422] sd 2:0:0:2: [sdd] tag#6 CDB: opcode=0x8a 8a 00 00 00 00 00 d2 fa 1a a8 00 00 04 00 00 00
[ 1105.334464] sd 2:0:0:2: [sdd] tag#7 uas_eh_abort_handler 0 uas-tag 8 inflight: CMD OUT
[ 1105.334471] sd 2:0:0:2: [sdd] tag#7 CDB: opcode=0x8a 8a 00 00 00 00 00 d2 fa 1e a8 00 00 04 00 00 00
[ 1105.334525] sd 2:0:0:2: [sdd] tag#0 uas_eh_abort_handler 0 uas-tag 1 inflight: CMD OUT
[ 1105.334532] sd 2:0:0:2: [sdd] tag#0 CDB: opcode=0x8a 8a 00 00 00 00 00 d2 fa 22 a8 00 00 04 00 00 00
[ 1105.334608] sd 2:0:0:2: [sdd] tag#8 uas_eh_abort_handler 0 uas-tag 9 inflight: CMD OUT
[ 1105.334615] sd 2:0:0:2: [sdd] tag#8 CDB: opcode=0x8a 8a 00 00 00 00 00 d2 fa 26 a8 00 00 04 00 00 00
[ 1105.334660] sd 2:0:0:2: [sdd] tag#9 uas_eh_abort_handler 0 uas-tag 10 inflight: CMD OUT
[ 1105.334668] sd 2:0:0:2: [sdd] tag#9 CDB: opcode=0x8a 8a 00 00 00 00 00 d2 fa 2a a8 00 00 04 00 00 00
[ 1105.334709] sd 2:0:0:2: [sdd] tag#10 uas_eh_abort_handler 0 uas-tag 11 inflight: CMD OUT
[ 1105.334716] sd 2:0:0:2: [sdd] tag#10 CDB: opcode=0x8a 8a 00 00 00 00 00 d2 fa 2e a8 00 00 04 00 00 00
[ 1105.334811] sd 2:0:0:2: [sdd] tag#11 uas_eh_abort_handler 0 uas-tag 12 inflight: CMD OUT
[ 1105.334819] sd 2:0:0:2: [sdd] tag#11 CDB: opcode=0x8a 8a 00 00 00 00 00 d2 fa 32 a8 00 00 04 00 00 00
[ 1105.334928] scsi host2: uas_eh_bus_reset_handler start
[ 1105.441103] usb 2-1: reset SuperSpeed USB device number 2 using xhci_hcd
[ 1105.456165] scsi host2: uas_eh_bus_reset_handler success
[ 1114.635162] xhci_hcd 0000:00:14.0: ERROR Transfer event for disabled endpoint or incorrect stream ring
[ 1114.635172] xhci_hcd 0000:00:14.0: @0000000002a42610 00000000 00000000 04000000 03088001
[ 1145.359295] sd 2:0:0:2: [sdd] tag#1 uas_eh_abort_handler 0 uas-tag 2 inflight: CMD OUT
[ 1145.359306] sd 2:0:0:2: [sdd] tag#1 CDB: opcode=0x8a 8a 00 00 00 00 00 d2 ff 47 d0 00 00 04 00 00 00
[ 1145.359495] sd 2:0:0:2: [sdd] tag#2 uas_eh_abort_handler 0 uas-tag 3 inflight: CMD OUT
[ 1145.359501] sd 2:0:0:2: [sdd] tag#2 CDB: opcode=0x8a 8a 00 00 00 00 00 d2 ff 4b d0 00 00 04 00 00 00
[ 1145.359582] sd 2:0:0:2: [sdd] tag#3 uas_eh_abort_handler 0 uas-tag 4 inflight: CMD OUT
[ 1145.359588] sd 2:0:0:2: [sdd] tag#3 CDB: opcode=0x8a 8a 00 00 00 00 00 d2 ff 4f d0 00 00 04 00 00 00
[ 1145.359631] sd 2:0:0:2: [sdd] tag#4 uas_eh_abort_handler 0 uas-tag 5 inflight: CMD OUT
[ 1145.359636] sd 2:0:0:2: [sdd] tag#4 CDB: opcode=0x8a 8a 00 00 00 00 00 d2 ff 53 d0 00 00 04 00 00 00
[ 1145.359671] sd 2:0:0:2: [sdd] tag#5 uas_eh_abort_handler 0 uas-tag 6 inflight: CMD OUT
[ 1145.359677] sd 2:0:0:2: [sdd] tag#5 CDB: opcode=0x8a 8a 00 00 00 00 00 d2 ff 57 d0 00 00 04 00 00 00
[ 1145.359755] sd 2:0:0:2: [sdd] tag#6 uas_eh_abort_handler 0 uas-tag 7 inflight: CMD OUT
[ 1145.359761] sd 2:0:0:2: [sdd] tag#6 CDB: opcode=0x8a 8a 00 00 00 00 00 d2 ff 5b d0 00 00 04 00 00 00
[ 1145.359846] sd 2:0:0:2: [sdd] tag#7 uas_eh_abort_handler 0 uas-tag 8 inflight: CMD OUT
[ 1145.359851] sd 2:0:0:2: [sdd] tag#7 CDB: opcode=0x8a 8a 00 00 00 00 00 d2 ff 5f d0 00 00 04 00 00 00
[ 1145.359889] sd 2:0:0:2: [sdd] tag#8 uas_eh_abort_handler 0 uas-tag 9 inflight: CMD OUT
[ 1145.359895] sd 2:0:0:2: [sdd] tag#8 CDB: opcode=0x8a 8a 00 00 00 00 00 d2 ff 63 d0 00 00 04 00 00 00
[ 1145.359930] sd 2:0:0:2: [sdd] tag#9 uas_eh_abort_handler 0 uas-tag 10 inflight: CMD OUT
[ 1145.359935] sd 2:0:0:2: [sdd] tag#9 CDB: opcode=0x8a 8a 00 00 00 00 00 d2 ff 67 d0 00 00 04 00 00 00
[ 1145.360036] sd 2:0:0:2: [sdd] tag#10 uas_eh_abort_handler 0 uas-tag 11 inflight: CMD OUT
[ 1145.360042] sd 2:0:0:2: [sdd] tag#10 CDB: opcode=0x8a 8a 00 00 00 00 00 d2 ff 6b d0 00 00 04 00 00 00
[ 1145.360093] sd 2:0:0:2: [sdd] tag#11 uas_eh_abort_handler 0 uas-tag 12 inflight: CMD OUT
[ 1145.360099] sd 2:0:0:2: [sdd] tag#11 CDB: opcode=0x8a 8a 00 00 00 00 00 d2 ff 6f d0 00 00 04 00 00 00
[ 1145.360136] sd 2:0:0:2: [sdd] tag#0 uas_eh_abort_handler 0 uas-tag 1 inflight: CMD OUT
[ 1145.360141] sd 2:0:0:2: [sdd] tag#0 CDB: opcode=0x8a 8a 00 00 00 00 00 d2 ff 73 d0 00 00 04 00 00 00
[ 1145.360185] scsi host2: uas_eh_bus_reset_handler start
[ 1145.466528] usb 2-1: reset SuperSpeed USB device number 2 using xhci_hcd
[ 1145.483619] scsi host2: uas_eh_bus_reset_handler success

lsusb -v

Code:

Bus 002 Device 002: ID 152d:0567 JMicron Technology Corp. / JMicron USA Technology Corp.
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 3.00
bDeviceClass 0
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 9
idVendor 0x152d JMicron Technology Corp. / JMicron USA Technology Corp.
idProduct 0x0567
bcdDevice 3.10
iManufacturer 1 JMicron
iProduct 2 USB to ATA/ATAPI Bridge
iSerial 3 0123456789ABCDEF
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 121
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 4 USB Mass Storage
bmAttributes 0xc0
Self Powered
MaxPower 2mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 8 Mass Storage
bInterfaceSubClass 6 SCSI
bInterfaceProtocol 80 Bulk-Only
iInterface 6 MSC Bulk-Only Transport
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 15
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 15
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 1
bNumEndpoints 4
bInterfaceClass 8 Mass Storage
bInterfaceSubClass 6 SCSI
bInterfaceProtocol 98
iInterface 10 MSC USB Attached SCSI
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 0
Command pipe (0x01)
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 0
MaxStreams 16
Status pipe (0x02)
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 15
MaxStreams 16
Data-in pipe (0x03)
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x04 EP 4 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0400 1x 1024 bytes
bInterval 0
bMaxBurst 15
MaxStreams 16
Data-out pipe (0x04)
Binary Object Store Descriptor:
bLength 5
bDescriptorType 15
wTotalLength 22
bNumDeviceCaps 2
USB 2.0 Extension Device Capability:
bLength 7
bDescriptorType 16
bDevCapabilityType 2
bmAttributes 0x00000002
HIRD Link Power Management (LPM) Supported
SuperSpeed USB Device Capability:
bLength 10
bDescriptorType 16
bDevCapabilityType 3
bmAttributes 0x00
wSpeedsSupported 0x000e
Device can operate at Full Speed (12Mbps)
Device can operate at High Speed (480Mbps)
Device can operate at SuperSpeed (5Gbps)
bFunctionalitySupport 1
Lowest fully-functional device speed is Full Speed (12Mbps)
bU1DevExitLat 10 micro seconds
bU2DevExitLat 32 micro seconds
can't get debug descriptor: Resource temporarily unavailable
Device Status: 0x000d
Self Powered
U1 Enabled
U2 Enabled

Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 3.00
bDeviceClass 9 Hub
bDeviceSubClass 0
bDeviceProtocol 3
bMaxPacketSize0 9
idVendor 0x1d6b Linux Foundation
idProduct 0x0003 3.0 root hub
bcdDevice 4.01
iManufacturer 3 Linux 4.1.12 xhci-hcd
iProduct 2 xHCI Host Controller
iSerial 1 0000:00:14.0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 31
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0004 1x 4 bytes
bInterval 12
bMaxBurst 0
Hub Descriptor:
bLength 12
bDescriptorType 42
nNbrPorts 6
wHubCharacteristic 0x000a
No power switching (usb 1.0)
Per-port overcurrent protection
bPwrOn2PwrGood 10 bbcode.txt done insert_posts.sh mybb_posts.csv mybb_posts.sql new newnew oej34_kunena_messages.csv oej34_kunena_messages_text.csv oej34_kunena_messages_text.sql oej34_kunena_users_banned.csv oej34_kunena_users.csv oej34_users.csv old openelecj34prod.sql posts.sh replace.sh table_posts test.csv test.txt update_sample.sql 2 milli seconds
bHubContrCurrent 0 milli Ampere
bHubDecLat 0.0 micro seconds
wHubDelay 0 nano seconds
DeviceRemovable 0x60
Hub Port Status:
Port 1: 0000.0203 5Gbps power U0 enable connect
Port 2: 0000.02a0 5Gbps power Rx.Detect
Port 3: 0000.02a0 5Gbps power Rx.Detect
Port 4: 0000.02a0 5Gbps power Rx.Detect
Port 5: 0000.02a0 5Gbps power Rx.Detect
Port 6: 0000.02a0 5Gbps power Rx.Detect
Binary Object Store Descriptor:
bLength 5
bDescriptorType 15
wTotalLength 15
bNumDeviceCaps 1
SuperSpeed USB Device Capability:
bLength 10
bDescriptorType 16
bDevCapabilityType 3
bmAttributes 0x02
Latency Tolerance Messages (LTM) Supported
wSpeedsSupported 0x0008
Device can operate at SuperSpeed (5Gbps)
bFunctionalitySupport 3
Lowest fully-functional device speed is SuperSpeed (5Gbps)
bU1DevExitLat 10 micro seconds
bU2DevExitLat 512 micro seconds
can't get debug descriptor: Resource temporarily unavailable
Device Status: 0x0001
Self Powered

Bus 001 Device 003: ID 8087:0a2a Intel Corp.
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.01
bDeviceClass 224 Wireless
bDeviceSubClass 1 Radio Frequency
bDeviceProtocol 1 Bluetooth
bMaxPacketSize0 64
idVendor 0x8087 Intel Corp.
idProduct 0x0a2a
bcdDevice 0.01
iManufacturer 0
iProduct 0
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 177
bNumInterfaces 2
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 224 Wireless
bInterfaceSubClass 1 Radio Frequency
bInterfaceProtocol 1 Bluetooth
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 224 Wireless
bInterfaceSubClass 1 Radio Frequency
bInterfaceProtocol 1 Bluetooth
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0000 1x 0 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0000 1x 0 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 1
bNumEndpoints 2
bInterfaceClass 224 Wireless
bInterfaceSubClass 1 Radio Frequency
bInterfaceProtocol 1 Bluetooth
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0009 1x 9 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0009 1x 9 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 2
bNumEndpoints 2
bInterfaceClass 224 Wireless
bInterfaceSubClass 1 Radio Frequency
bInterfaceProtocol 1 Bluetooth
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0011 1x 17 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0011 1x 17 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 3
bNumEndpoints 2
bInterfaceClass 224 Wireless
bInterfaceSubClass 1 Radio Frequency
bInterfaceProtocol 1 Bluetooth
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0019 1x 25 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0019 1x 25 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 4
bNumEndpoints 2
bInterfaceClass 224 Wireless
bInterfaceSubClass 1 Radio Frequency
bInterfaceProtocol 1 Bluetooth
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0021 1x 33 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0021 1x 33 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 5
bNumEndpoints 2
bInterfaceClass 224 Wireless
bInterfaceSubClass 1 Radio Frequency
bInterfaceProtocol 1 Bluetooth
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0031 1x 49 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0031 1x 49 bytes
bInterval 1
Binary Object Store Descriptor:
bLength 5
bDescriptorType 15
wTotalLength 12
bNumDeviceCaps 1
USB 2.0 Extension Device Capability:
bLength 7
bDescriptorType 16
bDevCapabilityType 2
bmAttributes 0x00000002
HIRD Link Power Management (LPM) Supported
Device Status: 0x0001
Self Powered

Bus 001 Device 002: ID 05e3:0610 Genesys Logic, Inc. 4-port hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0
bDeviceProtocol 2 TT per port
bMaxPacketSize0 64
idVendor 0x05e3 Genesys Logic, Inc.
idProduct 0x0610 4-port hub
bcdDevice 32.98
iManufacturer 0
iProduct 1 USB2.0 Hub
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 41
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0
bInterfaceProtocol 1 Single TT
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0001 1x 1 bytes
bInterval 12
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 1
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0
bInterfaceProtocol 2 TT per port
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0001 1x 1 bytes
bInterval 12
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 4
wHubCharacteristic 0x00e9
Per-port power switching
Per-port overcurrent protection
TT think time 32 FS bits
Port indicators
bPwrOn2PwrGood 50 bbcode.txt done insert_posts.sh mybb_posts.csv mybb_posts.sql new newnew oej34_kunena_messages.csv oej34_kunena_messages_text.csv oej34_kunena_messages_text.sql oej34_kunena_users_banned.csv oej34_kunena_users.csv oej34_users.csv old openelecj34prod.sql posts.sh replace.sh table_posts test.csv test.txt update_sample.sql 2 milli seconds
bHubContrCurrent 100 milli Ampere
DeviceRemovable 0x00
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0103 power enable connect
Port 2: 0000.0100 power
Port 3: 0000.0100 power
Port 4: 0000.0100 power
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0
bDeviceProtocol 0 Full speed (or root) hub
bMaxPacketSize0 64
bNumConfigurations 1
can't get debug descriptor: Resource temporarily unavailable
Device Status: 0x0001
Self Powered

Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 9 Hub
bDeviceSubClass 0
bDeviceProtocol 1 Single TT
bMaxPacketSize0 64
idVendor 0x1d6b Linux Foundation
idProduct 0x0002 2.0 root hub
bcdDevice 4.01
iManufacturer 3 Linux 4.1.12 xhci-hcd
iProduct 2 xHCI Host Controller
iSerial 1 0000:00:14.0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0
bInterfaceProtocol 0 Full speed (or root) hub
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0004 1x 4 bytes
bInterval 12
Hub Descriptor:
bLength 9
bDescriptorType 41
nNbrPorts 7
wHubCharacteristic 0x000a
No power switching (usb 1.0)
Per-port overcurrent protection
TT think time 8 FS bits
bPwrOn2PwrGood 10 bbcode.txt done insert_posts.sh mybb_posts.csv mybb_posts.sql new newnew oej34_kunena_messages.csv oej34_kunena_messages_text.csv oej34_kunena_messages_text.sql oej34_kunena_users_banned.csv oej34_kunena_users.csv oej34_users.csv old openelecj34prod.sql posts.sh replace.sh table_posts test.csv test.txt update_sample.sql 2 milli seconds
bHubContrCurrent 0 milli Ampere
DeviceRemovable 0xc0
PortPwrCtrlMask 0xff
Hub Port Status:
Port 1: 0000.0100 power
Port 2: 0000.0100 power
Port 3: 0000.0100 power
Port 4: 0000.0100 power
Port 5: 0000.0503 highspeed power enable connect
Port 6: 0000.0100 power
Port 7: 0000.0100 power
can't get device qualifier: Resource temporarily unavailable
can't get debug descriptor: Resource temporarily unavailable
Device Status: 0x0001
Self Powered

');

[chewitt]

I have some vague recollection that "options" conf files only work on driver modules built with =m and we set CONFIG_USB_UAS=y in our kernel config

alternative methods are including "usb-storage.quirks=152d:0567:u" in the kernel boot parameters, or doing

echo -n quirks=152d:0567:u | tee /sys/modules/usb_storage/params/quirks

which is something you can put in a /storage/.config/autostart.sh file so it's run early in the boot sequence

do some experiments..

[beredim]

Well i tried both

Code:

echo -n quirks=152d:0567:u | tee /sys/modules/usb_storage/params/quirks

and

Code:

echo -n quirks=152d:0567:u | tee /sys/module/usb_storage/parameters/quirks

for the autostart.sh (I think the correct path for an openelec 6.0 installation is the second one, but anyways)

and still get the same behavior:

Code:

[ 47.110627] usb 2-4: new SuperSpeed USB device number 2 using xhci_hcd
[ 47.129257] scsi host2: uas
[ 68.376455] scsi 2:0:0:0: tag#0 uas_eh_abort_handler 0 uas-tag 1 inflight: CMD IN
[ 68.376467] scsi 2:0:0:0: tag#0 CDB: opcode=0x12 12 00 00 00 24 00
[ 68.376595] scsi host2: uas_eh_bus_reset_handler start
[ 68.483515] usb 2-4: reset SuperSpeed USB device number 2 using xhci_hcd
[ 68.500062] scsi host2: uas_eh_bus_reset_handler success
[ 68.503542] scsi 2:0:0:0: Direct-Access JMicron Generic DISK00 0103 PQ: 0 ANSI: 6
[ 68.505206] scsi 2:0:0:1: Direct-Access JMicron Generic DISK01 0103 PQ: 0 ANSI: 6
[ 68.506519] scsi 2:0:0:2: Direct-Access JMicron Generic DISK02 0103 PQ: 0 ANSI: 6
[ 68.507553] scsi 2:0:0:3: Direct-Access JMicron Generic DISK03 0103 PQ: 0 ANSI: 6
[ 68.508647] sd 2:0:0:0: [sdb] Spinning up disk...
[ 68.508933] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 68.509455] sd 2:0:0:1: Attached scsi generic sg2 type 0
[ 68.509522] sd 2:0:0:1: [sdc] Spinning up disk...
[ 68.510893] sd 2:0:0:2: Attached scsi generic sg3 type 0
[ 68.511307] sd 2:0:0:2: [sdd] Spinning up disk...
[ 68.511583] sd 2:0:0:3: Attached scsi generic sg4 type 0
[ 68.511816] sd 2:0:0:3: [sde] Spinning up disk...
[ 69.509537] .ready
[ 69.509998] sd 2:0:0:0: [sdb] 7814035055 512-byte logical blocks: (4.00 TB/3.63 TiB)
[ 69.510003] sd 2:0:0:0: [sdb] 4096-byte physical blocks
[ 69.511302] sd 2:0:0:0: [sdb] Write Protect is off
[ 69.511309] sd 2:0:0:0: [sdb] Mode Sense: 53 00 00 08
[ 69.511692] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 69.513163] .
[ 69.513278] .ready
[ 69.515432] ready
[ 69.515793] sd 2:0:0:3: [sde] 7814037168 512-byte logical blocks: (4.00 TB/3.63 TiB)
[ 69.515803] sd 2:0:0:3: [sde] 4096-byte physical blocks
[ 69.515870] sd 2:0:0:2: [sdd] 7814037168 512-byte logical blocks: (4.00 TB/3.63 TiB)
[ 69.515878] sd 2:0:0:2: [sdd] 4096-byte physical blocks
[ 69.515953] .ready
[ 69.516386] sd 2:0:0:1: [sdc] 7814037168 512-byte logical blocks: (4.00 TB/3.63 TiB)
[ 69.516395] sd 2:0:0:1: [sdc] 4096-byte physical blocks
[ 69.516757] sd 2:0:0:3: [sde] Write Protect is off
[ 69.516765] sd 2:0:0:3: [sde] Mode Sense: 53 00 00 08
[ 69.517223] sd 2:0:0:3: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 69.518051] sd 2:0:0:2: [sdd] Write Protect is off
[ 69.518104] sd 2:0:0:2: [sdd] Mode Sense: 53 00 00 08
[ 69.518651] sd 2:0:0:1: [sdc] Write Protect is off
[ 69.518661] sd 2:0:0:1: [sdc] Mode Sense: 53 00 00 08
[ 69.518952] sd 2:0:0:2: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 69.519692] sd 2:0:0:1: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 69.642888] sde: sde1 sde2
[ 69.644501] sdb: sdb1 sdb2
[ 69.720365] sdd: sdd1 sdd2
[ 69.726695] sdc: sdc1 sdc2
[ 69.727894] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 69.728856] sd 2:0:0:3: [sde] Attached SCSI disk
[ 69.759212] sd 2:0:0:2: [sdd] Attached SCSI disk
[ 69.778032] sd 2:0:0:1: [sdc] Attached SCSI disk
[ 70.080317] fuse init (API version 7.23)
[ 703.051526] xhci_hcd 0000:00:14.0: ERROR Transfer event for disabled endpoint or incorrect stream ring
[ 703.051540] xhci_hcd 0000:00:14.0: @0000000002a46960 00000000 00000000 04000000 03088000
[ 733.366999] sd 2:0:0:2: [sdd] tag#4 uas_eh_abort_handler 0 uas-tag 5 inflight: CMD OUT
[ 733.367008] sd 2:0:0:2: [sdd] tag#4 CDB: opcode=0x8a 8a 00 00 00 00 00 5f 13 9e 08 00 00 04 00 00 00
[ 733.367059] sd 2:0:0:2: [sdd] tag#5 uas_eh_abort_handler 0 uas-tag 6 inflight: CMD OUT
[ 733.367065] sd 2:0:0:2: [sdd] tag#5 CDB: opcode=0x8a 8a 00 00 00 00 00 5f 13 a2 08 00 00 02 38 00 00
[ 733.367166] sd 2:0:0:2: [sdd] tag#6 uas_eh_abort_handler 0 uas-tag 7 inflight: CMD OUT
[ 733.367171] sd 2:0:0:2: [sdd] tag#6 CDB: opcode=0x8a 8a 00 00 00 00 00 5f 17 a4 e8 00 00 04 00 00 00
[ 733.367210] sd 2:0:0:2: [sdd] tag#7 uas_eh_abort_handler 0 uas-tag 8 inflight: CMD OUT
[ 733.367215] sd 2:0:0:2: [sdd] tag#7 CDB: opcode=0x8a 8a 00 00 00 00 00 5f 17 a8 e8 00 00 04 00 00 00
[ 733.367247] sd 2:0:0:2: [sdd] tag#8 uas_eh_abort_handler 0 uas-tag 9 inflight: CMD OUT
[ 733.367252] sd 2:0:0:2: [sdd] tag#8 CDB: opcode=0x8a 8a 00 00 00 00 00 5f 17 ac e8 00 00 04 00 00 00
[ 733.367326] sd 2:0:0:2: [sdd] tag#9 uas_eh_abort_handler 0 uas-tag 10 inflight: CMD OUT
[ 733.367331] sd 2:0:0:2: [sdd] tag#9 CDB: opcode=0x8a 8a 00 00 00 00 00 5f 17 b0 e8 00 00 04 00 00 00
[ 733.367368] sd 2:0:0:2: [sdd] tag#10 uas_eh_abort_handler 0 uas-tag 11 inflight: CMD OUT
[ 733.367373] sd 2:0:0:2: [sdd] tag#10 CDB: opcode=0x8a 8a 00 00 00 00 00 5f 17 b4 e8 00 00 04 00 00 00
[ 733.367414] sd 2:0:0:2: [sdd] tag#11 uas_eh_abort_handler 0 uas-tag 12 inflight: CMD OUT
[ 733.367420] sd 2:0:0:2: [sdd] tag#11 CDB: opcode=0x8a 8a 00 00 00 00 00 5f 17 b8 e8 00 00 04 00 00 00
[ 733.367502] sd 2:0:0:2: [sdd] tag#0 uas_eh_abort_handler 0 uas-tag 1 inflight: CMD OUT
[ 733.367507] sd 2:0:0:2: [sdd] tag#0 CDB: opcode=0x8a 8a 00 00 00 00 00 5f 17 bc e8 00 00 04 00 00 00
[ 733.367552] sd 2:0:0:2: [sdd] tag#1 uas_eh_abort_handler 0 uas-tag 2 inflight: CMD OUT
[ 733.367557] sd 2:0:0:2: [sdd] tag#1 CDB: opcode=0x8a 8a 00 00 00 00 00 5f 17 c0 e8 00 00 04 00 00 00
[ 733.367589] sd 2:0:0:2: [sdd] tag#2 uas_eh_abort_handler 0 uas-tag 3 inflight: CMD OUT
[ 733.367594] sd 2:0:0:2: [sdd] tag#2 CDB: opcode=0x8a 8a 00 00 00 00 00 5f 17 c4 e8 00 00 04 00 00 00
[ 733.367660] sd 2:0:0:2: [sdd] tag#3 uas_eh_abort_handler 0 uas-tag 4 inflight: CMD OUT
[ 733.367666] sd 2:0:0:2: [sdd] tag#3 CDB: opcode=0x8a 8a 00 00 00 00 00 5f 17 c8 e8 00 00 04 00 00 00
[ 733.367716] scsi host2: uas_eh_bus_reset_handler start
[ 733.473923] usb 2-4: reset SuperSpeed USB device number 2 using xhci_hcd
[ 733.489244] scsi host2: uas_eh_bus_reset_handler success
[ 742.345364] xhci_hcd 0000:00:14.0: ERROR Transfer event for disabled endpoint or incorrect stream ring
[ 742.345379] xhci_hcd 0000:00:14.0: @0000000002a46ff0 00000000 00000000 04000000 03088000
[ 772.406117] sd 2:0:0:2: [sdd] tag#10 uas_eh_abort_handler 0 uas-tag 11 inflight: CMD OUT
[ 772.406129] sd 2:0:0:2: [sdd] tag#10 CDB: opcode=0x8a 8a 00 00 00 00 00 7b a3 ed 80 00 00 04 00 00 00
[ 772.406199] sd 2:0:0:2: [sdd] tag#11 uas_eh_abort_handler 0 uas-tag 12 inflight: CMD OUT
[ 772.406207] sd 2:0:0:2: [sdd] tag#11 CDB: opcode=0x8a 8a 00 00 00 00 00 7b a3 f1 80 00 00 04 00 00 00
[ 772.406317] sd 2:0:0:2: [sdd] tag#0 uas_eh_abort_handler 0 uas-tag 1 inflight: CMD OUT
[ 772.406325] sd 2:0:0:2: [sdd] tag#0 CDB: opcode=0x8a 8a 00 00 00 00 00 7b a3 f5 80 00 00 04 00 00 00
[ 772.406431] sd 2:0:0:2: [sdd] tag#1 uas_eh_abort_handler 0 uas-tag 2 inflight: CMD OUT
[ 772.406440] sd 2:0:0:2: [sdd] tag#1 CDB: opcode=0x8a 8a 00 00 00 00 00 7b a3 f9 80 00 00 04 00 00 00
[ 772.406488] sd 2:0:0:2: [sdd] tag#2 uas_eh_abort_handler 0 uas-tag 3 inflight: CMD OUT
[ 772.406496] sd 2:0:0:2: [sdd] tag#2 CDB: opcode=0x8a 8a 00 00 00 00 00 7b a3 fd 80 00 00 04 00 00 00
[ 772.406538] sd 2:0:0:2: [sdd] tag#3 uas_eh_abort_handler 0 uas-tag 4 inflight: CMD OUT
[ 772.406546] sd 2:0:0:2: [sdd] tag#3 CDB: opcode=0x8a 8a 00 00 00 00 00 7b a4 01 80 00 00 04 00 00 00
[ 772.406592] sd 2:0:0:2: [sdd] tag#4 uas_eh_abort_handler 0 uas-tag 5 inflight: CMD OUT
[ 772.406600] sd 2:0:0:2: [sdd] tag#4 CDB: opcode=0x8a 8a 00 00 00 00 00 7b a4 05 80 00 00 04 00 00 00
[ 772.406643] sd 2:0:0:2: [sdd] tag#5 uas_eh_abort_handler 0 uas-tag 6 inflight: CMD OUT
[ 772.406651] sd 2:0:0:2: [sdd] tag#5 CDB: opcode=0x8a 8a 00 00 00 00 00 7b a4 09 80 00 00 04 00 00 00
[ 772.406695] sd 2:0:0:2: [sdd] tag#6 uas_eh_abort_handler 0 uas-tag 7 inflight: CMD OUT
[ 772.406702] sd 2:0:0:2: [sdd] tag#6 CDB: opcode=0x8a 8a 00 00 00 00 00 7b a4 0d 80 00 00 04 00 00 00
[ 772.406744] sd 2:0:0:2: [sdd] tag#7 uas_eh_abort_handler 0 uas-tag 8 inflight: CMD OUT
[ 772.406751] sd 2:0:0:2: [sdd] tag#7 CDB: opcode=0x8a 8a 00 00 00 00 00 7b a4 11 80 00 00 04 00 00 00
[ 772.406798] sd 2:0:0:2: [sdd] tag#8 uas_eh_abort_handler 0 uas-tag 9 inflight: CMD OUT
[ 772.406805] sd 2:0:0:2: [sdd] tag#8 CDB: opcode=0x8a 8a 00 00 00 00 00 7b a4 15 80 00 00 04 00 00 00
[ 772.406853] sd 2:0:0:2: [sdd] tag#9 uas_eh_abort_handler 0 uas-tag 10 inflight: CMD OUT
[ 772.406860] sd 2:0:0:2: [sdd] tag#9 CDB: opcode=0x8a 8a 00 00 00 00 00 7b a4 19 80 00 00 04 00 00 00
[ 772.406919] scsi host2: uas_eh_bus_reset_handler start
[ 772.513695] usb 2-4: reset SuperSpeed USB device number 2 using xhci_hcd
[ 772.530319] scsi host2: uas_eh_bus_reset_handler success
[ 779.873145] xhci_hcd 0000:00:14.0: ERROR Transfer event for disabled endpoint or incorrect stream ring
[ 779.873155] xhci_hcd 0000:00:14.0: @0000000002a46930 00000000 00000000 04000000 03088001
[ 810.377792] sd 2:0:0:2: [sdd] tag#11 uas_eh_abort_handler 0 uas-tag 12 inflight: CMD OUT
[ 810.377804] sd 2:0:0:2: [sdd] tag#11 CDB: opcode=0x8a 8a 00 00 00 00 00 7b b4 45 80 00 00 04 00 00 00
[ 810.378075] sd 2:0:0:2: [sdd] tag#0 uas_eh_abort_handler 0 uas-tag 1 inflight: CMD OUT
[ 810.378083] sd 2:0:0:2: [sdd] tag#0 CDB: opcode=0x8a 8a 00 00 00 00 00 7b b4 49 80 00 00 04 00 00 00
[ 810.378147] sd 2:0:0:2: [sdd] tag#1 uas_eh_abort_handler 0 uas-tag 2 inflight: CMD OUT
[ 810.378153] sd 2:0:0:2: [sdd] tag#1 CDB: opcode=0x8a 8a 00 00 00 00 00 7b b4 4d 80 00 00 04 00 00 00
[ 810.378198] sd 2:0:0:2: [sdd] tag#2 uas_eh_abort_handler 0 uas-tag 3 inflight: CMD OUT
[ 810.378204] sd 2:0:0:2: [sdd] tag#2 CDB: opcode=0x8a 8a 00 00 00 00 00 7b b4 51 80 00 00 04 00 00 00
[ 810.378306] sd 2:0:0:2: [sdd] tag#3 uas_eh_abort_handler 0 uas-tag 4 inflight: CMD OUT
[ 810.378314] sd 2:0:0:2: [sdd] tag#3 CDB: opcode=0x8a 8a 00 00 00 00 00 7b b4 55 80 00 00 04 00 00 00
[ 810.378422] sd 2:0:0:2: [sdd] tag#4 uas_eh_abort_handler 0 uas-tag 5 inflight: CMD OUT
[ 810.378429] sd 2:0:0:2: [sdd] tag#4 CDB: opcode=0x8a 8a 00 00 00 00 00 7b b4 59 80 00 00 04 00 00 00
[ 810.378484] sd 2:0:0:2: [sdd] tag#5 uas_eh_abort_handler 0 uas-tag 6 inflight: CMD OUT
[ 810.378490] sd 2:0:0:2: [sdd] tag#5 CDB: opcode=0x8a 8a 00 00 00 00 00 7b b4 5d 80 00 00 04 00 00 00
[ 810.378529] sd 2:0:0:2: [sdd] tag#6 uas_eh_abort_handler 0 uas-tag 7 inflight: CMD OUT
[ 810.378535] sd 2:0:0:2: [sdd] tag#6 CDB: opcode=0x8a 8a 00 00 00 00 00 7b b4 61 80 00 00 04 00 00 00
[ 810.378682] sd 2:0:0:2: [sdd] tag#7 uas_eh_abort_handler 0 uas-tag 8 inflight: CMD OUT
[ 810.378695] sd 2:0:0:2: [sdd] tag#7 CDB: opcode=0x8a 8a 00 00 00 00 00 7b b4 65 80 00 00 04 00 00 00
[ 810.378740] sd 2:0:0:2: [sdd] tag#8 uas_eh_abort_handler 0 uas-tag 9 inflight: CMD OUT
[ 810.378746] sd 2:0:0:2: [sdd] tag#8 CDB: opcode=0x8a 8a 00 00 00 00 00 7b b4 69 80 00 00 04 00 00 00
[ 810.378803] sd 2:0:0:2: [sdd] tag#9 uas_eh_abort_handler 0 uas-tag 10 inflight: CMD OUT
[ 810.378810] sd 2:0:0:2: [sdd] tag#9 CDB: opcode=0x8a 8a 00 00 00 00 00 7b b4 6d 80 00 00 04 00 00 00
[ 810.378850] sd 2:0:0:2: [sdd] tag#10 uas_eh_abort_handler 0 uas-tag 11 inflight: CMD OUT
[ 810.378856] sd 2:0:0:2: [sdd] tag#10 CDB: opcode=0x8a 8a 00 00 00 00 00 7b b4 71 80 00 00 04 00 00 00
[ 810.378932] scsi host2: uas_eh_bus_reset_handler start
[ 810.485554] usb 2-4: reset SuperSpeed USB device number 2 using xhci_hcd
[ 810.500353] scsi host2: uas_eh_bus_reset_handler success
[ 815.972018] xhci_hcd 0000:00:14.0: ERROR Transfer event for disabled endpoint or incorrect stream ring
[ 815.972027] xhci_hcd 0000:00:14.0: @0000000002a463f0 00000000 00000000 04000000 03088000

Apparently UAS is still activated as with OP
:angry: :angry: :angry:

So how would I go about trying to do the kernel boot parameter approach chewitt suggested?

[chewitt]

Code:

mount -o remount,rw /flash
nano /flash/extlinux.conf <= edit the boot params
mount -o remount,ro /flash

[beredim]

YES YES YES

Code:

[ 16.871642] usb 2-4: new SuperSpeed USB device number 2 using xhci_hcd
[ 16.889091] usb 2-4: UAS is blacklisted for this device, using usb-storage instead
[ 16.890237] usb 2-4: UAS is blacklisted for this device, using usb-storage instead
[ 16.890244] usb-storage 2-4:1.0: USB Mass Storage device detected
[ 16.890415] usb-storage 2-4:1.0: Quirks match for vid 152d pid 0567: 800000

For future reference this is what my /flash/extlinux.conf looks like after the edit

Code:

DEFAULT linux
PROMPT 0

LABEL linux
KERNEL /KERNEL
APPEND boot=LABEL=System disk=LABEL=Storage usb-storage.quirks=152d:0567:u quiet

THANK YOU CHEWITT

PS A welcome side-effect is that now HDSentinel finally reports correctly on the disks in the enclosure, whereas before I was getting 'uknown'

[CaTz]

Hi,

I probably have the same issue with Openelec 6 and External HDD that attached to the machine.
I`ve tried to add to add "usb-storage.quirks=152d:0567:u" to my /flash/extlinux.conf (with the ID from lsusb) and it not helped.
But i`m not sure that this quirk mode was enabled, how can i ensure that?

[chewitt]

Code:

dmesg | paste

^^ after clean boot, share the URL here

[CaTz]

http://sprunge.us/iTAD
Thanx