tvheadend and dvbsky t9580

[TLeVEntI]

i have just installed a dvbsky t9850 on my pc with openelec os, added tvheadend pvr and tvheadend service. i have ticked first setting front end initialization. tuners i have left as one. not sure if i should select 2 or not as it is a combo

issue i have is keep getting tvheadend htsp connection lost

[trsqr]

Hi there,

Please run :
dmesg | pastebinit

On the shell and send the output. You can wait for two tuners, but that doesn't matter probably - I'd guess both tuners will be available at the same time when the card initializes.

[TLeVEntI]

Code:

/$ dmesg | pastebinit
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0 0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0100 54552 100 23 100 54529 29 70826 --:--:-- --:--:-- --:--:-- 70816
http://sprunge.us/VBCb

hope this is what info you are after

[TLeVEntI]

was told didn't need to connect power cable to tuner maybe next week will try with it connected

[trsqr]

Probably a good idea. The log shows that the smipcie driver has loaded and found 2 tuners. Adapter 0 is your DVB-T tuner (it will show up in Tvheadend as Silicon labs Si2168) and adapter 1 is the DVB-S tuner (Montage M88DS3103). That looks good, so I'd expect that they should work ok in Tvheadend as well.

You mention you're getting Tvheadend HTSP connection lost errors. Are you able to set the Tvheadend up correctly? Note that you will need to enable both Tvheadend service and Tvheadend HTSP Client in Kodi. This video shows how to install both the client and the service: https://www.youtube.com/watch?v=1KWwlzVPXrM even if it is for a bit older release and for Wetek. The idea is the same for any system. Nowadays the Tvheadend addon is in the unofficial repository, so you will need to install the unofficial OpenElec add on repository first and then install the service from there.

[TLeVEntI]

Reinstalled openelec got tvheadend working and scanned sat channels. Just need to figure out how to setup cable. But will open a new thread for that